
3/ 4
Hardware Setup
GPU installation
1) Uninstall chassis screws, remove cover
2) Install Motherboard Battery.
3) Connect the PCIE power cords with motherboard
4) X16 PCIE slot (closest to CPU) corresponds to slot 0
5) Insert the GPU until you here a ‘click’ sound
6) Insert PCI-e 6pin power onto GPU
7) Once complete
,
reinstall the cover with x4 screws
Note
:
a. For 8pin powered GPUs, connect the 6pin PCE-e cable into any of the 6/8 pins.
Your GPU will work fine.
b. For 6pin + 8pin powered GPUs, the extension connectors are not included.