MINN KOTA i-Pilot Link User manual

• Newi-PilotTMplatformthatinteractswithEthernetequippedHumminbird®units
including700HD,800,900&1100series.
• CompatiblewithPowerDriveTMV2,Riptide®ST,andRiptide®SPmotors
• Hasallthesamefunctionsascurrenti-PilotTM,plusadditionalfeatures
• Nocrosscompatibilitywithexistingi-PilotTMhoweverthenewkitcanreplacethe
existingi-PilotTMsystem.
i-PilotTM Link includes:
–ControlHead
–RemoteControl
–ChargingCablewithACadapter
–UserManual
–QuickReferenceGuide
–Lanyard
Add-on Accessories (sold separately):
–RemoteHoldingCradle(withBeltClip)
–ChargingCable
boatinglifestyleadventure
NEW Product Release
LINK

LINK
Spot-Lock
• Functionalityissimilartocurrenti-PilotTM
 –spot-Lockcanbeengagedfromthei-PilotTMremoteorfromtheHumminbird®unit
 –spot-LocklocationshowsupontheHumminbird®screen
 –spot-LocklocationscanbestoredontheHumminbird®andonthei-PilotTM
• Spot-LockstorageontheHumminbird®islimitedtotheamountofwaypointstorage
spaceavailable,typicallyupto2500
• Spot-Lockstorageonthei-PilotTMcontrollerislimitedto16
iTrack
• iTrackisanewtermdesignatingani-PilotTMLinkcompatibletrack
• iTracksaredisplayedontheHumminbird®alongwiththecurrenttrack
• iTrackrecordingcanbeinitiatedfromtheremoteortheshnder
 – Ifyourtrollingmotorisnotpoweredup,youwillstillbeabletorecordan
  iTrackthroughyourHumminbird®
 – Upto50iTrackscanbestoredontheshnder,andupto16onthei-Pilot
• iTracklengthisupto3.2kilometres
Humminbird®displaying Spot Lock location
Fishfinder while recording an iTrack Fishfinder after recording an iTrack
Remote displaying
active Spot-Lock
Remote while
recording an iTrack

LINK
i-PilotTM Link – AutoPilot
• AutoPilothasthesamefunctionalityascurrenti-PilotTM
 – GPSAdvancedAutoPilotandLegacycompassAutoPilot
  arebothavailable
 – AdvancedAPorCompassAPisuserselectable
• AutoPilotcanbeenabledfromtheremoteorfromtheHumminbird®
 – OntheHBscreen,theAPbearingcanbesetbymotor 
  directionorbycursor
i-PilotTM Link – Go To Waypoint
• AnystoredWaypointontheHumminbird®canbeusedasaGoTo
location
 – FromtheHumminbird®
• CursoroverastoredWaypointandpressGoTobutton
• Selectfromalist
 – Fromi-PilotTMremote
• PressGoToandalistofallstoredWaypointswithinrangewillappear
asalistonthescreen
• SpeedisusercontrolledwhenGoToWaypointisnavigating
• OnceWaypointisreached,theuserhas3ArrivalOptions
 – Spot-Lock
 – AutoPilot
 – PropOff
Remote Go To
Waypoint
Fishfinder going to Waypoint

LINK
i-Pilot Link – Go To Spot-Lock
• SelectionfunctionisthesameasGoToWaypoint
• WhennavigatingtoselectedSpot-Locklocation
 – Nouserspeedcontrol
• Speedautomaticallyrampsupuntilitreachesarrivalorhitstopspeed
• i-PilotTMautomaticallygoesintoSpot-Lockonarrival;Nooption
i-Pilot Link – Go To iTrack
• SelectionfunctionthesameasGoToWaypoint
• iTrackscanbeselectedfromtheshnderorremote
• WheniTrackisselected,i-PilotTMwillgotoclosestpointonthetrackandNavigateto
Start(orEnd)dependingonuserchoice
• iTrackscanbenamedandorganizedthroughHumminbird®’sWaypointManagement
Fishfinder selecting Spot-Lock
Fishfinder going to Spot-lock
Fishfinder selecting an iTrack Fishfinder navigating to Start of iTrack
Remote selecting Spot-Lock
Remote navigating Start of iTrack

BLA
Code
Description
i-PILOTTM LINK MOTORS
601570 RT 55/ST W/I-PILOT/LINK NO FT PD 54” 12V
601574 RT 80/ST W/I-PILOT/LINK NO FT PD 54” 24V
601576 RT 80/ST W/I-PILOT/LINK NO FT PD 60” 24V
i-PILOTTM LINK KITS AND ACCESSORIES
602914 I-PILOT LINK SYSTEM KIT T/S POWERDRVE V2
602924 I-PILOT LINK SYSTEM KIT T/S RIPTIDE ST
602934 I-PILOT LINK SYSTEM KIT T/S RIPTIDE SP
602944 I-PILOT LINK SYSTEM REMOTE
602948 i-PILOT LINK SYSTEM CHARGING CABLE
602947 i-PILOT LINK SYS REMOTE CRADLE/BELT CLIP
LINK
i-Pilot Link - Follow the Contour is not Available in Australia
This feature is created using Lakemaster Charts only found in USA lakes and rivers. It is not and will not be available
in Australia. Navionics charts will not operate this function. If you would like to follow contour on a Navionics chart you
can record a track over the contour line. Refer to the Record a track section for this function.