MIRABELLA ANKO 1.4M RGB Pixel Corner Light User manual

ANKO 1.4M RGB Pixel Corner Light
Read all instructions carefully, even if you are quite familiar with the product. Keep the user manual for
future reference.
Care And Maintenance
-This is not a toy. Close attention is necessary when used nearby children.
-Clean the product with a soft, dry cloth. Do not use any form of abrasive cleaner or solvents to clean the unit.
-Caution: Never use a damaged product (e.g., worn & damaged cable, cracked casing).
-Use with standard 5V USB adaptor or phone charger (adaptor is not included)
-Do not place it next to high temperature objects such as heater, or use it in wet place such as bathroom
-Do not place the lamp on an uneven or inclined surface
-Please operate according to the instructions
-NON-replaceable LED inside
-Cut off the power supply before carrying out clean and maintaining process to prevent electric shock
Product Assembly

IR remote use 2 x AAA batteries (not included)
1. ON/OFF power button
2. Change lighting modes
3. Change LED movement direction
4. Increase and decrease dynamic speed
5. AUTO mode, Red Green Blue chasing
6. Brighness increase or decrease when lamp is in single color
7. Cool White
8. Increase or decrease white light colour temperature
9. Warm White
10. Single Color mode
Mode List
1
3 colour chasing
2
6 colour chasing
3
3 colour superimposed
4
6 colour superimposed
5
3 colour opening / closing
6
6 colour opening / closing
7
Full color flowing
8
7 colour jump
Battery replacement
To replace batteries:
1. Carefully open battery compartment and remove exhausted batteries.
2. Replace with new 2 x AAA batteries (Recommended Alkaline batteries) and refit base.
Battery usage
Do not mix old and new batteries. Replace all batteries of a set at the same time.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are only to be charged under adult supervision
Different types of batteries or new and used batteries are not to be mixed
Insert batteries with the correct polarities.
Exhausted batteries are to be removed from the product
Remove batteries when not in use for a prolonged period of time.
The supply terminals are not to be short-circuited
Dispose of batteries immediately in accordance with your local council.
Product Specification
Size: 142 x 32.5 x 32.5cm
Number of LED: 82
Power input: 5V DC 1A
Maximum Power: 5W
Material: Aluminium alloy, PC plastic
MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
TOLL FREE: 1800 636 528, www.mirabella.com.au