Super - bright 4500lm
The XD3200U delivers super - bright 4500lm images.
It’s the ideal brightness for giving presentations in
large meeting rooms and conference halls.
3000lm 4500lm
New Color Wheel System
Dust can easily accumulate on the color wheel sensors of previous models.
But the sensor in now mounted in the rotary shaft motor casing, which is almost fully
enclosed, making it much less likely for dust to collect on the sensor.
Long 4000hr Lamp Life
The WD3300U/XD3200U has a lamp temperature
controlling system that enables a lamp life of up to
4000hours.*
1
Long-life lamps make dramatic
reductions in overall cost of ownership by reducing
the frequency of lamp replacement.
Brilliant Color™, one of the latest innovations from
Texas Instruments, produces amazingly rich and
vibrant colors. We developed a 5-segment color
wheel (R, G, B, W and Y), and combining it with
Brilliant Color™ and selective lamp-powered
modulation techniques, the WD3300U and
XD3200U intelligently reproduce colors that
improve the intensity and vibrancy across the
entire screen.
Brilliant Color ™and Mitsubishi Electric Engineering Yield Superior Color Performance
(*1): When lamp is used in “Low” mode. Maximum life in “Standard” mode is 2000hr.
(*2): Lamp life refers to the average time required for brightness to be reduced by half, and not
the time specified in the warranty. Use time may vary widely according to the environment and
conditions, and whether or not cleaning and other maintenance procedures are followed.
The air duct flow design has been improved so that fan noise doesn’t interfere with the
intake-air flow. Additionally, the fan noise is blocked from direct exit, realizing a significant
reduction in operation noise.
Lamp Replacement Frequency*2
2,000hr lamp
4,000hr lamp
2,000 hours 4,000 hours
Reduced
Lamp
Replacements
1st replacement
Original Lamp
Original Lamp
Ultra - quiet 26dBA Operation
The fan noise from a projector can be annoying during a
presentation or videoconference. But with the adoption of a
hermetically sealed color wheel and improved air duct path,
that’s a thing of the past.
The WD3300U and XD3200U
have a significantly low fan
noise of only 26dBA (lamp
in Low mode). As a result,
audiences can enjoy
presentations and
conferences with the distraction
of projector noise.
Precise Gradation Reproduction
Well-established DDP3020 DLP™ data processor
High-speed LVDS (low-voltage differential signal)
10-bit I/P conversion circuit eliminate jaggies
Lavish functions to fully savor the job
Presentation Mode (for high brightness)
High Power
Normal Power
Low Power
Lamp Power (Basic concept)
Lamp Power (Basic concept)
Auto Mode (for color reproduction)
High Power
Normal Power
Low Power
Lamp Power Modulation
Light intensity increases for the white and yellow
segments of the color wheel, giving greater
emphasis to bright colors in more vivid tones.
Light intensity increases for the RGB
segment on the color wheel, ensuring ample
brightness while screening brilliant colors.
4-segment (RGBW) color wheel
w/o-BrilliantColorTM
5-segment (RGBWY) color wheel
Yellow reproducibilit
improves
BrilliantColorTM
Large-screen reproduction of high-quality images. Breathtaking and powerful.
But image quality is not the only improvement to our large-screen projectors.
Mitsubishi Electric’s new projectors are designed for easy installation and maintenance,
superior operability and a comfortable viewing experience.
Welcome to the future of high-lumen projectors.
The New WD3300U and XD3200U
Comfort Redefined
4500
lm XGA
4000
lm WXGA
Side Access Lamp & Center Lens Designs
The lamp can be accessed from the side of the
projector, simplifying the replacement process, as the
projector does not have to be turned around when
sitting on a shelf or turned
over when suspended from
the ceiling. The center-set
lens design makes set-up
easy since the projector
lens need only to be
aligned with the center of
the screen.
New Lamp Drive System
Up until now, the electrodes in the lamp deteriorated more quickly when using
the projector for long periods of time, resulting in a loss of brightness.
These projectors incorporate an optical design that optimizes lamp operation
to realize a lamp drive that makes it possible to stabilize the shape of the
electrode during long-term use. As a result, the maximum lamp service life is
obtained for every projection mode and loss in projection brightness is
extended over a longer period of time.
Filter free
DLPTM projectors are structurally airtight, therefore an intake filter is unneeded, eliminating
filter changing and lowering costs.
Quick Lens Change
User Logo Projection
A user-created image
(logo, picture, etc.) can
be loaded into the
projector and used as
the start-up image or
the stand-by screen.
The top cover has a cut-out around the lens.
This advanced feature enables the lens to be
changed without removing the entire top cover.
Stand-by Power Consumption Under 1W*
We are always striving to protect the global environment
and save energy, which has resulted in stand-by power
consumption being reduced to under 1W*.
* Less than 2W in Normal mode (network turned on).
Low Maintenance & High Durability User Friendly
Operation simplified with Mitsubishi Electric’s user-friendly design
Stunning Beautiful Colors & High-quality Design
* Function adjusts image in four directions (up/down/left/right)
without touching the projector.
* XD3200U only. WD3300U contrast is 2300 : 1.
Motor-driven Lens Shift* & High Contrast of 2500:1
*
Splash screen
The base spins together with the color wheel.
The wind pressure created by the centrifugal
force keeps dust from entering through the gap
(less than 1mm or 1/25in). The magnet is
embedded in the base, so there is no protruding
part for dust to accumulate on. Even if dust
does accumulate, since a magnetic signal
method is used, the signal passes through the
dust without any problem of color distinction.
Dust accumulates on the
sensor and thick part of the
timing mark blocking the path
of the light when using the light
signal method. This interferes
with the color distinction
process, causing poor color
alignment and breaking.
Previous color wheel illustration New color wheel illustration
Photo Sensor
Fan noise
Fan noise
Air flow
Airflow
Air flow
Air flow
Fan
Fan
Fannoise
Fan noise
Air flow
Air flow
Timing
Mark
Optical Signal
Hall-
effect IC
Magnet
Less than 1mm
Fixed
Magnetic Signal
100%
Electrode Abrasion
Conventional Lamp
Drive System
New Lamp Drive System
Total Lamp Usage in Hour
0%
The distance between the electrodes
increases as they wear causing a
decrease in arc density, which also
results in a loss of brightness.
Adoption of a new lamp drive system
prevents electrode wear, giving the
lamp a longer service life and enabling
it to retain projection brightness over
a longer period of time.
Initially, the gap between the
electrodes is small and the
arc density is high, resulting
in high brightness.
Electrode
Arc Discharge
Connect a computer with ProjectorView™ installed to a LAN for wired
operation and monitoring of several different projectors.
LAN Control
RBWGY
RBWGY