First use
Now that the drivers are installed and your external player is connect to the HYPEBOX, you can
start using the touch sensor.
The sensor is automatically calibrated. If needed, it is possible to manually calibrate it
following this simple procedure.
1) in Windows, please launch the installed tool „MultiTouch Platform“ and click the
„Calibrate“ button.
2) the calibration process will begin, a cross will be shown on the screen.
3) press the crosses for at least 1 second or until instructed.
4) after all 4 crosses have been pressed, the software will save the calibration, that means
you only have to calibrate the unit once.
5) you can use the HYPEBOX.
HYPEBOX Transparent LCD Showcase
Touch Models V1 only - size 21.5“ to 55“
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
6
NOTE: make sure the mouse is disconnected during the calibration and that no objects
are touching the screen.
Testing the unit
1) is the unit correctly connected to a stable 110-240V, 50-60Hz power source? Is the power
cable loose? Have you tested the power socket and the extension cords (if any)?
2) is the power button on the back of the HYPEBOX unit turned ON?
3) is the right input source selected? If not, the NO SIGNAL message will be displayed
4) Are you using the internal media player or an external player?
-Internal media player:
are the files saved in the root folder of your USB stick?
are they in the supported formats MP4 / .AVI / .MPG / .MP2?
are the files in the right resolution (usually 1920 x 1080px, check the HB model)
-External PC/player:
is the HDMI cable connected?
have you tested with a regular screen if the PC/player you are using is actually
transmitting a video signal, in the right resolution (usually 1920 x 1080px)?
6) Touch sensor:
-is the USB cable provided with the unit, connected from your device
(PCplayer) to the "USB Touch port on the back of the HYPEBOX?
-have you tried to reboot the external PC/player you are using?
-have you tried to install the touch sensor drivers?
-is the PC/Player connected to other devices (screens, touch screens, etc...)
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
