
SPECIFICATIONS
Battery type: Built-in Ni-MH rechargeable
Voltage: 3.6V
Adapter input: 100V~240V AC 50/60 Hz 0.5A Max
Adapter output: 6V 150mA
Charging time: Approximately 15 hours
Number of bottles per charge: 40
IMPORTANT SAFEGUARDS
When using the wine opener, always follow these safety
precautions:
• To avoid damaging your wine opener, do not put the bottle
opener in water or other liquids.
• Do not use this product around flammable and explosive
gases.
• Do not use this product for other purposes.
• This product is only suitable for indoor use.
• Do not try to repair the product yourself.
• Do not press the bottle opener against the bottle or try to
accelerate the speed of the bottle opener.
• Do not touch the screw hook. When using the bottle
opener, hold the wine opener shell and wine bottle tightly.
• To avoid possible injury, do not let children play with the
product.
• If your wine opener can't open a bottle or release the cork,
the battery may be low.Insert a small pin into the reset hole
on the top of the opener and press down on the button
inside the hole.
ATTENTION: The corkscrew is sharp. Handle carefully. Keep
hands and utensils out of the wine opener while operating to
prevent the possibility of severe personal injury or damage
to the product or property.
ONE-YEAR LIMITED WARRANTY
Contact Modal:
For customer support, call 1-800-499-3402 (U.S. and Canada)
www.bestbuy.com/modal
MODAL is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
TROUBLESHOOTING
My wine opener stops in the middle of removing the cork.
• If your wine opener can't open a bottle or release the cork,
the battery may be low. Wait a few minutes and reset your
wine opener. Insert a small pin into the reset hole on the
top of your opener and press down on the button inside the
hole. Your opener releases the cork from the screw hook.
• Recharge your wine opener
The LED doesn’t light.
• Make sure that the AC adapter is connected correctly.
• Make sure that your wine opener is inserted correctly into
the charging base.
• Make sure that the power outlet is working.
The motor is making noises or not working correctly.
• Insert a small pin in the reset hole, then press the pin down
on the switch inside the wine opener. After the motor
reverses and stops, your wine opener returns to its normal
working state.
The cork broke off in the bottle.
• Use manual corkscrew to remove the broken cork. If that
doesn't work, you may have to push the broken cork into
bottle.
I reset my wine opener, but the cork is still stuck in my
opener.
• Charge your wine opener for a few minutes, then reset.
V3 ENGLISH 19-0510
Reset hole
MD-WOARCSS0_19-0510_QSG_V3_EN.ai 2 8/2/2019 2:28:15 PM