8-MIDI
8.1MIDIOUT
MIDI outjacktransmitstoredmidimessagesorpassthroughthemessagesreceived
fromothermidi controller.TherangeoftheMIDIoutPC#is0~199oroff (transmit
nothing),therangeofCC#controller number/valueis0~127oroff(transmitnothing).
There’retwochannelsof PC#/CC#ineachpreset, easilytocontroltwomidi devices.
Themidichanneliseditable, range1~16(section9).
Everyclickonthesamepresetswitchwillrepeat totransmitstoredmidimessages
once,thisfeaturecouldbeusedfor taptemposynconmultiplemididevices.
ReceivedPC#vs.GEC5PresetsMap
MIDIinPC#
GEC5 PRESET
00
A1P1
...
... 03
A1P4
...
...
04
B1P1
07
B1P4
...
... 126
H4P3
127
H4P4
A1P1: PoolA,Bank1,Preset 1 H4P4:PoolH,Bank4, Preset 4
8.2MIDIIN
MIDI injack receiveProgramChangenumbers 0~127andrecallpresets A1P1~H4P4,
Belowis themapofPC#vs. Preset.
GEC5alsoreceivesbypass CC#formasterbypass.
Masterbypass controllernumber: 102,
controllervalue: 0~63,bypass.
controllervalue: 64~127,engage.
ReceivedCC#
Controller Value
Bypass
Engage 102 0~63
102 64~127
9-Initialization
GEC5hasainitializationmenuwhichallowsusertosetup:
1.Displaycode T1",transmittingchannel ofthefirstmidiPC#/CC#,range1~15.
2.Displaycode T2",transmittingchannel ofthe2ndmidi PC#/CC#,range1~15.
3.Displaycode Rc”,receivingmidi channel,range1~16.
4.Displaycode Tu”,midithrough,value:on/off
5.Displaycode E1",precontrollerofthe1stmidichannel,value:0~127oroff.
6.Displaycode E2",precontrollerofthe2ndmidichannel,value:0~127or off.
7.Displaycode Au”,EachpresettransmitsitsPC#onmidichannel16,value:on/off.
8.Displaycode CA”,Clickonanacitivepreset,value:1or2.
Value1:Everyclicksendsarepeatmidimessge,usefullfor taptempo.
Value2:Clickonanactivepreset,itgoesbacktothepreviousrecalledpreset.
9.Displaycode Fy”,Factoryreset.
8.3PreControllermessage
GEC5allows eachpresettotransmit aspecialCC#pirortostoredPC#/CC#, it is
calledPreControllermessage,theprecontrollernumbercouldbe0~127oroff
(seesection9.5,9.6), thecontrollervalueis always127. Usually ThePreController
isusedforengagingabypassedmididevicebeforewhichreceives othermidimessage.
