molex 19078-0307 User manual
Bench Adapter Assembly for Air-Powered Crimp Tool
Doc No: ATS-19 78- 3 7 Release Date: 5-27- 9 UNCONTROLLED COPY Page 1 of 2
Revision: B Revision Date: 5-27- 9
FILTER REGULATOR
(NOT SUPPLIED)
FOOT
SWITCH
BENCH
ADAPTER
TO AIR
SUPPLY
SECURE AIR CRIMPING
TOOL IN POSTION
CONNEC
T TUBING FROM
FOOT SWITCH WITHOUT FITTING
Figure
1
CONNECT TUBING FROM
FOOT SWITCH WITH FITTING
(NOT SUPPLIED)
Benc Adapter Assembly
For Air-Powered Crimp Tool
Instruction S eet
Order No. 19078-0307
Features
Higher volume output with less operator fatigue
Operates on standard shop air (85-95 PSI)
Perfect for assembly line operations.
SCOPE
This bench adapter assembly 19 78- 3 7 with foot switch is intended for use with the 19279- 1 (AT-2 Air-
Powered Crimping Tool) and/ or with Electrical Control Box (Order No. 64 1-4 ).
OPERATION
When using the bench adapter assembly, be sure the base is securely fastened to a clean, sturdy workbench
or table in a well-lighted area. Fasten the stand with (3) #1/4-2 FHCS, nuts, and washers not supplied of
sufficient length for the work bench.
When using the bench adapter assembly remove the air hose (Order No. 19279- 14 ) from the crimp tool and
connect the tubing from the footswitch. See Figure 1. If using the Optional Electrical Controls Order No. 64 1-
4 see the Instruction Manual ATS-19279 1 for additional information.
Bench Adapter Assembly for Air-Powered Crimp Tool
Doc No: ATS-19 78- 3 7 Release Date: 5-27- 9 UNCONTROLLED COPY Page 2 of 2
Revision: B Revision Date: 5-27- 9
3
6
7
4
2
3
5
1
(2)
(2)
Figure 11
Parts List
19078-0307-Optional Benc Adapter Figure 11
Item
Order No.
Engineering No.
Description Qty
1 N/A N/A Dual Air Hose (1/8 ID by 8’) 1**
2 N/A N/A Air Foot Switch (3B – 3 A2 – S) 1**
3 N/A N/A 1/8” NPT – M Fitting, by 1/8 Barb 3**
4 N/A N/A 1/8” Close Nipple (M/M) 1**
5 N/A N/A Clippard Thread on Hose Clamp 2**
6 N/A N/A 1/8” Fitting Brass Pipe Tee M/F/F
1**
7 N/A N/A 1/8” Brass Coupling - 1/8 (F/F) 1**
** Available from an industrial supply company such as MSC (1-8 -645-727 ).
Americas Headquarters
Lisle, Illinois 6 532 U.S.A.
1-8 -78MOLEX
Far East Nort Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
Far East Sout Headquarters
Jurong, Singapore
65-6-268-6868
European Headquarters
Munich, Germany
49-89-413 92-
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 6 532 U.S.A.
63 -969-455
Fax: 63 -969-1352
Visit our Web site at ttp://www.molex.com
Table of contents
