Momentum MMT-3100-1 User manual

0.75hr

1. Do not dispose of the baery in a re.
2. Dispose of baeries in accordance with manufacturer’s recommendaons and government
regulaons
3. Baeries should be used in a manner consistent with manufacturer’s recommendaons and
guidelines. When used correctly, primary lithium cells and baeries provide a safe and
dependable source of portable power. However, if they are misused or abused, this may result
in leakage or in extreme cases, re or explosion.
4. Always take care to correctly insert baeries observing (+) and (-) polarity marks on the baery
and the device for which it is intended. Proper polarity must be observed to avoid charging or
damage to either equipment or baeries. Primary baeries shall not be charged. Charging a
primary baery, by any means, may result in leakage, re, or explosion.
5. 

injury.
6. mmediately seek medical aenon if a cell or baery has been swallowed. Also, contact your
local poison control center.
7. Never short-circuit baeries, as this may lead to high temperatures. leakage, re, or explosion.
8. Baeries should not be disassembled, crushed, punctured, or otherwise mulated. Such abuses
may result in leakage, re, or explosion.
9. Soldering directly to the baery surface should be avoided to prevent possible internal damage,
leakage, or cell rupture. Soldering should be done only with the advice of the manufacturer.
10. Baeries should not be placed into a re except under condions of controlled incineraon.
Failure to observe this precauon may result in a explosion.
11. Store unused baeries in their original packaging and away from metal objects that may short-
circuit them. n addion, baeries should be stored in a cold, dry place.
12. n the event that the electrolyte comes into contact with the skin or eyes, immediately ush
with fresh water for a least 15 minutes and seek medical aenon.
13. Baeries should not be heated or exposed to temperatures exceeding the manufacturer’s
recommended maximum temperature. Such thermal exposure may lead to leakage, re, or
explosion.