Monessen Hearth SBV400A B Vent Installation instructions

PRODUCT SPECIFICATIONS
SBV400A B Vent
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable
building or fire codes.Contact local building or fire officials about restrictions and installation inspection requirements.All photographs and drawings on this brochure are for illustrative purposes only and are not intended
for, nor should they be used as a substitute for the instructions packaged with the unit.Appearance and specifications of the product are subject to change without notice.© 2007 Monessen Hearth Systems Co.
A Brand of Monessen Hearth Systems Co.
149 Cleveland Drive, Paris, Kentucky 40361
www.monessenhearth.com
INTERIOR DIMENSIONS
Front opening width: 36”
Front opening height: 21-1/2”
Rear Wall Width: 20-1/2”
Hearth Depth: 17”
TECHNICAL INFORMATION
Max. Btu Input: 29,000 BTU/HR
Ignition System: Standing Pilot or Electronic
Gas Type: Natural or LP
Flue Type: B Vent
Vent Size: 6" B Vent
Clearance to Flue: Specified by B Vent Manufacturer
Clearance to Fireplace: 1/2"
CSA Design Certified
FIELD INSTALLED ACCESSORIES
Bi-fold Glass Doors: GD36PBA (Polished Brass), GD36BA (Black),
GD36SSA (Stainless)
Single Pane Glass Doors: GDS36PBA (Polished Brass), GDS36BA
(Black), GDS36SSA (Stainless)
Outside CombustionAir Kit: OAC4
AmbientTechnologies™Remote Controls andThermostats
HPBA
Hearth, Patio & Barbecue Association
MADE IN U.S.A.