Montessori Furniture Circle User manual

1945 1925 1945 1925 1735
1735 1519 1519 1020 780
540 607
400
600
600 600
182
613
385
420
380
600
227
600
600
227
576
606
751
"Circle" Teepee Indoor Playground
ASSEMBLY DETAILS
6 - Vertical front stand
1 pc.
7 - Upper back plank
1 pc.
8 - Upper front plank
1 pc.
9 - Lower plank
2 pcs.
10 - Middle plank
2 pcs.
11 - Lintel
1 pc.
12 - Askew plank
6 pcs.
13 - Base
2 pcs.
14 - Handle
2 pcs.
15 - Upper board
1 pc.
16 - Upper cover
2 pcs.
17 - Back cover
1 pc.
18 - Sidewall #1
2 pcs.
19 - Sidewall #2
2 pcs.
20 - Sidewall #3
1 pc.
21 - Sidewall #4
1 pc.
22 - Nog #1
1 pc.
23 - Nog #2
13 pcs.
24 - Rope ladder
1 pc.
25 - Nog #3
1 pc.
a - Screw M6x30
18 pcs.
b - Screw M6x40
38 pcs.
c - Screw M6x50
20 pcs.
d - Screw M6x70
2 pcs.
e - Set of minifixes
16 pcs.
f - Self-tapping screw 3x25
28 pcs.
g - 4 mm hex key
1 pc.
h - Screwdriver
1 pc.
i - Dowel
4 pcs.
j - Self-tapping screw 6x100
4 pcs.
1 - Askew front stand
1 pc.
2 - Askew front short stand
1 pc.
3 - Askew back stand
1 pc.
4 - Askew back short stand
1 pc.
5 - Vertical back stand
1 pc.

3
е
е
е
е3е
е
е
е
1
е
е
е
е
1
е
е
е
е
Pic. 2
Take the snatd (1) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.2.
Pic. 1
Take the stand (3) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.1.
"Circle" Teepee Indoor Playground

2
е
е
е
е
е
е
е
е
2
с
с
с
с
с
с
с
с
с
с
с
с
3
20
19
e
e
e
e
e
e
e
e
1
"Circle" Teepee Indoor Playground
Pic. 4
Take the stand (2) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.4.
Pic. 3
Install the sidewalls #2, #3 (19, 20) between the stands (1, 3) and close
the eccentric ties (e) clockwise by turning them by 180 degrees. Then attach
the askew planks (12) with the help of screws (c) and hex key (g). See Pic.3.

4
е
е
е
е
е
е
е
е
b
b
b
b
b
b
b
b
b
b
ee
e e
e
e
e
e
19
21
24 24
Pic. 6
Install the sidewalls (19, 21) between the stands (2, 4) and close the eccentric ties
(e) clockwise by turning them by 180 degrees. Then attach the rope ladder (24) with
the screws (b) and hex key (g). See Pic.6.
Pic. 5
Take the stand (4) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.5.

10 10
11
c
c
с
с
с
с
Pic. 8
Attach the semi-products depicted in the Pic.3, Pic,6 and Pic.7 with the help of
screws (c) and hex key (g). See Pic.8.
Pic. 7
Take the lintel (11) and using the screws (c) and hex key (g) attach the middle
planks (10). See Pic.7.

f f
ff
13
13
10
с25
Pic. 10
Attach the nog #3 (25) to the received construction with the help of screws (c) and
hex key (g). See Pic.10.
Pic. 9
Take the bases (13) and attach them to the middle plank (10) and lintels (11) with
the help of self-tapping screws (f) and screwdriver (h). See Pic.9.

а
а
17
16
аа
а
а
16
16
а
а
Pic. 12
Attach the upper covers (16) to the received structure with the scerws (a) and
hex key (g). See Pic.12.
Pic. 11
Attach the back cover (17) to the previously assembled construction with the help of
screws (a) and hex key (g). See Pic.11.

а
а
а
а
14
14
18
f
f
f
f
f
f
Pic. 14
Take self-tapping screws (f) and attach the sidewall #1 (18) with them.
Attach another one from the opposite side in a same way. See Pic.14.
Pic. 13
Handles (14) are to be attached to the construction with screws (a) and hex key (g).
See Pic.13.

15 f f
f
15
7
8
b
b
b
b
b
b
b
b
b
b
b
b
b
b
23
23
23
23
23
23
23
Pic. 16
Take 7 nogs (23) and attach them one by one to the back and front upper planks (7,
8) with the screws (b) and hex key (g). See Pic.16.
Pic. 15
Take the upper board (15) and attach ot to the assembled construction with
self-tapping screws (f) and screwdriver (h). See Pic.15.

b
b
b
23
23
23
23
23
23b
b
b
b
b
b
b
b
b
b
b
b
56
Pic. 18
Join the constructions depicted in the Pic. 15 and Pic.16 with the help of screws (b)
and hex key (g). See Pic.18.
Pic. 17
Take 6 nogs (23) and attach them one by one to the stands (5,6) with the screws (b)
and hex key (g). See Pic.17.