Montessori Furniture Wave User manual

"Wave" Teepee Indoor Playground
ASSEMBLY DETAILS
6 - Vertical front stand
1 pc.
7 - Upper back plank
1 pc.
8 - Upper front plank
1 pc.
9 - Lower plank
2 pcs.
10 - Middle plank
2 pcs.
11 - Lintel
1 pc.
12 - Askew plank
6 pcs.
13 - Base
2 pcs.
14 - Handle
4 pcs.
15 - Upper cover
2 pcs.
16 - Hooksr
3 pcs.
17 - Back wall #1
2 pcs.
18 - Back wall #2
2 pcs.
19 - Back wall #3
1 pc.
20 - Back wall #4
1 pc.
21 - Back wall #5
1 pc.
22 - Side wall #1
1 pc.
23 - Side wall #2
1 pc..
24 - Side wall #3
2 pcs.
25 - Nog #1
1 pc.
26 - Nog #2
13 pcs.
27 - Rope
ladder
1 pc.
28 - Nog #3
1 pc.
29 - Nog #4
6 pcs.
a - Screw M6x30
22 pcs.
b - Screws M6x40
40 pcs.
c - Screws M6x50
20 pcs.
d - Screw M6x70
2 pcs.
e - Minifix set
16 pcs.
f - Screw 3x25
54 pcs.
g - Hex key 4 mm
1 pc.
h - Screwdriver
1 pc.
i - Dowel
4 pcs.
j - Screws 6x100
4 pcs.
1 - Askew front stand
1 pc.
2 - Askew front short stand
1 pc.
3 - Askew back stand
1 pc.
4 - Askew back short stand
1 pc.
5 - Vertical back stand
1 pc.
540
606
1945 1925 1735
1925
1945
780
576
1020
600
606
1519
400
600
666
1519
607
1735

3
е
е
е
е3е
е
е
е
1
е
е
е
е
1
е
е
е
е
Pic. 2
Take the stand (1) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.2.
Pic. 1
Take the stand (3) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.1.
"Wave" Teepee Indoor Playground

1
3
24
22
c
c
c
c
c
c
c
c
c
c
c
c
12
12
12
12
12
12
2
е
е
е
е
е
е
е
е
2
"Wave" Teepee Indoor Playground
Pic. 4
Take the stand (2) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.4.
Pic. 3
Install the side stands #1 and #3 (22, 24) and close the eccentric ties (e)
clockwise by 180 degreed. Then attach the askew planks (12) with
the screws (c) and hex keys (g). See Pic. 3.

4
е
е
е
е
е
е
е
е
16 f
f
f
f
29
29
Pic. 6
Take the nogs (29) and using the self-tapping screws (f) and screwdriver (h), attach
the hooks (16).
Pic. 5
Take the stand (4) and using the screwdriver (h) install the dowels from minifixes (e).
See Pic.5.

4
2
23
24
b
b
b
b
b
b
b
b
b
b
bb
10 10
11
c
c
Pic. 8
Take the lintel (11) and using the screws (c) and hex key (g) attach the middle
plank (10). See Pic. 8.
Pic. 7
Install the sidewalls #2, 3 (23, 24) and details depicted in the Pic. 6 between
the front and back askew stands and close the eccentric ties (e) clockwise
by 180 degrees and screw the screws (b) in with the hex key (g). See Pic. 7.

c
cc
c
f
f
f
f
ff
f
f f
f
f
13
13
ff f
f
Pic. 10
Attach the bases (13) to the received structure with the help of self-tapping screw (f)
and screwdriver (h). See Pic.10.
Pic. 9
Join the details despited in the Pic. 3,7.8 with the screws (c) and hex key (g).
See Pic. 9.

b
b27
f
f
f
f
f
f
f
f
f
f
17
18
19
20
21
f
f
21
Pic. 12
Take the received construction and attach the back walls (17, 18, 19, 20, 21) one
by one with the self-tapping screws (f) and screwdriver (h). See Pic.12.
Pic. 11
Take the rope ladder (27) and attach it with the help of screws (b) and hex key (g)
to the previously assembled construction. See Pic.11.

2815
a
a
a
15 28
a
aa
а
а
а
15
Pic. 14
Attach another upper cover (15) in a similar way with screws (a) and hex key (g).
See Pic. 14.
Pic. 13
Take the upper cover (15) and attach it with the help of screws (a) and hex key (g)
to the previously assembled construction. Then attach the nog (28) with screws (a)
to the upper cover (15). See Pic.13.

18
17
f
f
f
f
f
а
а
14
Pic. 16
Two handles (14) are to the attached to the assembled structure with screws (a)
and hex key (g). See Pic. 16.
Pic. 15
Back walls #1,2 (17,18) attach with self-tapping screws (f) and screwdriver (h) to
the previously assembled construction, from its inner side. See Pic. 15.

14
14
aa
a
a
a
a
14
7
8
b
b
b
b
b
b
b
b
b
b
b
b
b
b
26
26
26
26
26
26
26
Pic. 18
7 nogs (26) are to be attached to the upper planks (7,8) one by one with
the screws (b) and hex key (g). See Pic.18.
Pic. 17
Attach another handles (14) with screws (a) and hex key (g). See Pic. 17.