Montessori Furniture Tower User manual

608
25
576
25
516
25
Climbing complex "Tower"
45
600
65
600
65
704
120
65
1000 1000
65
65
1000 1000
65
600
65
600
65
718
30
542
30
116
704 704
130
ASSEMBLY DETAILS
6 - Lower stand #2
1 pc.
7 - Lower stand #3
1 pc.
8 - Lower stand #4
1 pc.
9 - Long plank
2 pcs.
10 - Short plank
1 pc.
11 - Nog #11
12 pcs.
12 - Nog #2
9 pcs.
13 - Npg #3
2 pcs.
14 - Basis #1
1 pc.
15 - Basis #2
1 pc.
16 - Front side roof
1 pc.
17 - Back side roof
1 pc.
18 - Upper back plank
1 pc.
19 - Lower back plank
1 pc.
20 - Front wall
1 pc.
21 - Chalk-board
1 pc.
22 - Left side of
the monkey bar
1 pc.
23 - Right side of
the monkey bar
1 pc.
24 - Left sidewall of the arch
1 pc.
25 - Right sidewall of
the arch
1 pc.
26 - Roof plank #1
6 pcs.
27 - Roof plank #2
2 pcs.
28 - Roof plank #3
2 pcs.
a - Screw M6x80
4 pcs.
b - Screw M6x50
24 pcs.
c - Screw M6x35
30 pcs.
d - Dowels of minifixes
45mm
8 pcs.
e - Erickson nut M6x15
12 pcs.
f - Self-tapping screws 3x25
44 pcs.
g - 4 mm Hex key
2 pcs.
h - Screwdriver
1 pc.
i - Dowel
4 pcs.
j - Self-tapping screws 6x100
4 pcs.
1 - Upper stand #1
1 pc.
2 - Upper stand #2
1 pc.
3 - Upper stand #3
1 pc.
4 - Upper stand #4
1 pc.
5 - Lower stand #1
1 pc.

Pic. 2
Take the sidewall (6) and attach the nogs (11) with the screws (b) and hex key (g).
Then attach the lower stand #4 (8) in a similar way. See Pic. 2.
Pic. 1
Take the sidewall (5) and attach the nogs (11) with the screws (b) and hex key (g).
Then attach the lower stand #3 (7) in a similar way. See Pic. 1.
Climbing complex "Tower"
6
8
11
11
b
b
b
b
b
b
b
b
11
11
5
7

Pic. 4
Take the upper stand #2 (2), attach the nogs (11) with the help of screws (b) and
hex key (g). Then attach the upper stand #4 (4). See Pic. 4.
Pic. 3
Take the upper stand #1 (1) and attach the nogs (11) with the screws (b) and
hex key (g). Then attach the upper stand #3 (3) in a similar way. See Pic. 3.
d
d
dd
b
b
b
b
b
b
b
b
11
11
11
11
1
3
4 2
11
11
b
b
b
b
d d d d

Pic. 6
Join both constructions shown in the Pic. 2 and Pic. 4 by installing the basis #2 (15)
between them. Then with the help of screwdriver (h), close the eccentric ties by
turning them clockwise by 180 degrees. See Pic. 6.
Pic. 5
Join both constructions shown in the Pic.1 and Pic.3 by installing the basis #1 (14)
between them. Then using the screwdriver (h), close the eccentric ties by 180
degrees. See Pic. 5.
14
1
5
3
7
14
7
3
2
6
4
8
15
15
6
2

Pic. 8
Joing 3 constructions shown in the Pic. 5, 6, 7 with the screws (b), nuts (e)
and hex keys (g). See Pic. 8.
Pic. 7
Take the short plank (10) and screw the long planks (9) with the screws (b)
and hex key (g). See Pic. 7.
b
b
10
9
9
e
e
b
b
bb
e
e
еb

Pic. 10
Using the self-tapping screws (f) and screwdriver (h) attach the front wall (20)
to the previously assembled construction. See Pic. 10.
Pic. 9
Fix the bases (14, 15) with the help of self-tapping screws (f) and screwdriver (h).
See Pic. 9.
ffff
ffff
ff
f
14
15
f
f
ff
20
f

Pic. 12
Upper back plank (18) and lowe back plank (19) are to be attached to the previously
assembled construction with the screws (c) and hex key (g). See Pic.12.
Pic. 11
Take the previously assebmbled construction and using the screws (a)
and hex key (g) attch the nogs #1 (11). See Pic. 11.
a
a
a
a
11
11
c
c
c
c
e
e
e
e
18
19

Pic. 14
Join the constructions shown in the Pic. 12 and Pic.3 with the help of screws (c),
nuts (e) and hex keys (g). See Pic.14.
Pic. 13
Take the front side roof (16) and back side roof (17) and using the self-tapping
screws (f) and screwdriver (h) attach the roof planks (26, 27, 28). See Pic. 13.
Attach another roof side in a similar way.
16 17
28
27
26
26
26
f
f
f
f
f
f
f
f
f
f
f
f
с
с
с
с
e
e
ee

Pic. 16
Install the assembed arch into the grooves of the base #2 (15). See Pic. 16.
Pic. 15
Take the left side of the arch (24) and using the screws (c) and hex key (g) attach
the nogs (12). Attach the right side of the arch (25) in a same way, See Pic. 15.
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
25
24
12
12
12
12
12
12
12
12
12
15

Pic. 18
Install assembled monkey bar. See Pic. 18.
Pic. 17
Take the left side of the monkey bar (22) and using the screws (c) and hex key (g)
attach the nogs (13). Attach the right side of the monkey bar (23). See Pic. 17.
с
с
с
с
13
13
23
22