5
Corded use
1Be sure the power switch is in the off
position.
2Plug the clipper into the electrical
socket.
3Slide the power switch to the on
position. When finished clipping, turn
the clipper off by sliding the power
switch down.
Oil (use blade oil)
1To lubricate the blades use one or
two drops of oil and spread over
the cutters. Do not overoil. Excess oil
will cause damage to your product.
Care and maintenance
• Never clean, remove or replace trimmer
guide with the motor on.
• Do not apply any pressure to cutters.
• Do not touch the cutters with hard
objects as this may damage the cutter.
• Do not use while bathing, showering or
immersing the unit in water or other
liquids as damage to the trimmer may
occur.
• Never use harsh or corrosive cleaners
such as benzene or bleach.
Important safeguards
When using your appliance, basic safety
precautions should always be followed.
1Read all instructions carefully.
2Use the appliance for its intended use
only.
3To protect against the risk of electric
shock, do not immerse the appliance in
water or other liquids.
4Before use, make certain blades are
aligned properly.
5Do not use this appliance with damaged
or broken combs or with teeth missing
from the blades as injury may occur.
6Never use the trimmer on wet hair.
7Switch off before placing down.
8Switch off before fitting or removing
attachments.
9In the interests of environmental safety
dispose of batteries safely.