Morvelli FHD22 User manual

Connect smartphone to
your Wi-Fi network (with
the Internet).
STEP 3
STEP 4
For the first connection, place
the camera as close to the
router as possible (1-6ft).
Note. If the router supports
two frequencies, use a 2.4GHz
network when connecting.
STEP 1
STEP 2
Connect power to the camera.
Wait for the camera to load
(approximately 1 minute).
There is a Reset button at
the back of the camera.
Hold this button for about
5-10 seconds. You will
hear a characteristic sound.
After a successful reset,
the camera will emit
lingering sound.
STEP 5
STEP 6 STEP 7
Download and install
the Smart Life app in
the App Store or the
Play Market.
Go to the Smart Life
app and register a new
account.
Go to the Smart Life app.
Click «Add Device».
First select the «Video
Surveillance» category.
Then select «Smart
Camera» from the list.

STEP 9
STEP 8
A page with resetting
the camera will open.
We have completed
this point in the
previous step. Click
«NEXT».
Your Wi-Fi network to
which we connected
earlier will be displayed.
Enter the password for
this network and click
«NEXT».
3-7 inc
STEP 10
STEP 11
The full screen of your
smartphone will display a
QR code. You need to
scan this QR code with the
Morvelli FHD22 camera.
Place your smartphone
opposite the camera lens
at a distance of 3-7
inches.
After successfully scanning the QR code, the camera
will emit lingering sound.
Click «I heard a Prompt». The camera will start to
connect, and when the process reaches 100%, the
connected camera will be displayed on the screen.
Done!
Your camera is connected to your
Smart Life account!
WI-FI HOME SECURITY CAMERA
FHD22
QUICK START GUIDE