
Configurator
With the MoveMaster configuration
software you can set, save and load the
button assignment of your MoveMaster
and / or Button Commander. The software
makes it possible to save different
configurations for different applications.
The button assignment can be configured
via the drop-downs above each button.
The set configuration is transferred to the
device via the "Write configuration" button.
Existing configurations can be loaded via
the "Load configuration file" button, but it
will not be transferred to the device imme-
diately. This step can be summarized with
the checkbox „and write configuration".
Then, when loading a configuration from a
file, it is immediately transferred to the de-
vice. Successfully performed actions are
displayed in the green notification box.
The configurator is also downloadable from
our homepage:
www.movemaster.biz>downloads