MPC NetFRAME 1420 Product manual

1

MPC Computers, LLC NetFRAME 1420
2
Table of Contents
Table of Contents......................................................................................................................... 2
Copyright/Limited Warranty ......................................................................................................... 4
MPC Resources ....................................................................................................................... 5
System Information .................................................................................................................. 6
Manual Conventions................................................................................................................. 6
Printing the Manual .................................................................................................................. 7
Manual Updates ....................................................................................................................... 8
System Safety .......................................................................................................................... 9
Operating Environment .......................................................................................................... 12
Cleaning ................................................................................................................................. 13
Protecting ............................................................................................................................... 13
Features and Specifications ................................................................................................... 14
Server Chassis Views ............................................................................................................15
Server Installation ...................................................................................................................... 18
Unpacking the System ........................................................................................................... 18
Preparing for Setup ................................................................................................................ 19
Server Precautions................................................................................................................. 19
Rack Installation ..................................................................................................................... 20
Safety and Preparation........................................................................................................... 30
Access Panel.......................................................................................................................... 31
Preparation............................................................................................................................. 33
PCI Riser Card ....................................................................................................................... 34
System Fans........................................................................................................................... 34
Drive Bays .............................................................................................................................. 35
Power Supply ......................................................................................................................... 37
Memory................................................................................................................................... 39
Processor and Heatsink ......................................................................................................... 41
System Board Features and Specifications ........................................................................... 46
PC Health Monitoring ............................................................................................................. 48
Jumper Settings ..................................................................................................................... 49
Power Configuration Settings................................................................................................. 56
System Board Installation.......................................................................................................57
Software Installation ............................................................................................................... 58
BIOS Setup ................................................................................................................................ 62
Changing the Configuration Data........................................................................................... 62

MPC Computers, LLC NetFRAME 1420
Running Setup........................................................................................................................ 62
Main Setup ............................................................................................................................. 63
Advanced Setup ..................................................................................................................... 66
Security................................................................................................................................... 74
Boot ........................................................................................................................................ 75
Exit.......................................................................................................................................... 76
System Board Problems......................................................................................................... 77
BIOS POST Messages........................................................................................................... 78
Diagnostic Testing Preparation .............................................................................................. 84
Initial System Startup Problems ............................................................................................. 84
New Application Software Problems ...................................................................................... 85
Problems After the System Has Been Running ..................................................................... 85
FAQs ...................................................................................................................................... 86
Specific Problems................................................................................................................... 86
Service and Support .................................................................................................................. 90
MPC Technical Support ......................................................................................................... 90
Regulatory Information............................................................................................................... 91
Product Regulatory Compliance............................................................................................. 91
Index .............................................................................................................................................. 93

MPC Computers, LLC NetFRAME 1420
4
Copyright/Limited Warranty
Copyright 2005 MPC Computers, LLC. All rights reserved. The information in this document is
subject to change without prior notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer. In no event will the manufacturer or
seller of an MPC product be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use the product or documentation, even if advised of
the possibility of such damages. Except as stated in the applicable MPC Computers, LLC limited
warranty, MPC and its affiliates, by this manual, make no other express warranties. THE
IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IF THESE LIMITATIONS DO
NOT APPLY TO YOU, THEN ALL IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME
TO THE TERM OF THE LIMITED WARRANTY PERIOD REFLECTED ON YOUR PACKING
SLIP OR INVOICE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. This document contains proprietary
information that is protected by copyright. All rights are reserved. No part of this document may
be photocopied, reproduced, or translated to another language without the prior written consent
of:
MPC Computers, LLC
906 E. Karcher Road
Nampa, Idaho 83687
Trademark Notice
Windows, Windows 2000, MS-DOS, and Microsoft are registered trademarks of Microsoft
Corporation. Pentium and MMX are trademarks or registered trademarks of Intel Corporation.
Other product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this manual, the
manufacturer and seller assume no liability resulting from errors or omissions in this manual or
from the use of the information contained herein.
Notices
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means (mechanical photocopying, recording or otherwise) without the prior written
permission of the manufacturer. The information within this manual is subject to change without
notice.
The manufacturer shall not be held liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the furnishing, performance, or
use of this material.
Life Support and Nuclear Facilities
Products sold by MPC are not authorized for use as critical components in medical devices or
systems or in nuclear facilities without the express written approval of the Chief Executive Officer
of MPC.
EMA001076-00, KDA, 10-31-2005

MPC Computers, LLC NetFRAME 1420
Welcome
Congratulations on the purchase of your MPC NetFRAME®1420 server.
The following sections contain more information about your server and this manual:
MPC Resources
System Information
Manual Conventions
Printing the Manual
Manual Updates
MPC Resources
MPC provides several resources to assist you with using your new storage solution.
Further Reading
It is recommended that you read all documentation, in addition to this manual, related to any
software or hardware supplied with your storage solution.
For More Information
For the latest information about your storage solution and about MPC services, please visit the
MPC Web site at www.mpccorp.com.
Manual Comments
If you would like to comment or ask questions about the manual, please contact us at
[email protected].
Service and Support
Service and Support Tools
Main Support Site http://support.mpccorp.com
Knowledge Base http://primus.mpccorp.com/mknowledge/
Contacting Support Support Phone Number: [phone]

MPC Computers, LLC NetFRAME 1420
6
System Information
If you require technical support in the future, the following information will help an MPC support
technician locate the specifications for your server and aid in returning it to normal operation.
Model Names and Manual Number
Model Name NetFRAME® 1420
5015M-T
Manual Number EMA001076-00
Manual Conventions
The following conventions are used throughout this manual.
Note: Important information concerning the operation of your server.
Caution: Failure to follow directions could result in loss of data or damage to
equipment. Failure to heed these cautions could negate the user warranty.
Warning: Failure to follow directions will result in loss of data or damage to
equipment and/or could result in physical harm. Failure to heed these
warnings could negate the user warranty.
Special Text
The text in this guide is formatted to highlight unique information or instructions. Review the
following examples of special text used throughout this manual:
Screen (window) names, functions, or anything that appears on the screen is formatted in
bold. For example: Click OK, the Standards screen, the Edit menu.
Keyboard strokes are indicated by brackets. For example: Press [Enter], use the [Alt] key.
When keys should be held down simultaneously, they are separated by the + sign. For
example: Press [Ctrl+Alt+Delete]. When keys should be pressed sequentially, they will be
in individual brackets without the + sign. For example: Press [1][Enter]. The [1] key
should be pressed first, and then the [Enter] key should be pressed.
Screen messages are indicated by quotes. For example: The message "Enter your
username and password" will appear.
Anything that you need to type will appear in italics. For example: Enter the word
password.

MPC Computers, LLC NetFRAME 1420
Printing the Manual
This system manual may be printed as a PDF document or directly from this Online Help version.
The instructions below explain how to print this system manual.
Printing the PDF Manual
Printing from Online Help
Printing the PDF Manual
A PDF version of this manual can be found at the following locations:
NetFRAME 1420 Drivers and Documentation CD: Install the CD and click on the
Technical Reference Manual link for further instructions.
System Hard Drive: Search for the file name: NetFRAME1420.pdf.
The MPC Support Web site: http://support.mpccorp.com. See Manual Updates for
instructions.
Note: The links contained throughout this manual are only operative in the online
help version of the manual.
Printing from Online Help
Printing the Entire Manual
To print the entire manual, complete the following steps:
1. Click the book titled NetFRAME®1420 Technical Reference Manual located at the top
of the Contents tab.
2. Click the Print button located on the menu bar.
3. When the Print Topics dialog box appears, select Print the selected heading and all
subtopics.
4. Click OK.
5. When the Print dialog box appears, make the appropriate selections, and print the
manual.
Note: The Print dialog box may take a few seconds to appear. Also, the Print
dialog box may minimize to the taskbar, so check the taskbar if the dialog box does
not appear.
Printing Topics or Parts of the Manual
To print a specific topic or part of the manual, complete the following steps:
1. Click the book title or topic title that you want to print.
2. Click the Print button located on the menu bar.
3. When the Print Topics dialog box appears, do one of the following:
Select Print the selected topic if you selected a topic title.
Select Print the selected heading and all subtopics if you selected a book title.

MPC Computers, LLC NetFRAME 1420
8
4. Click OK.
5. When the Print dialog box appears, make the appropriate selections, and print the
manual topic(s).
Note: The Print dialog box may take a few seconds to appear. Also, the Print
dialog box may minimize to the taskbar, so check the taskbar if the dialog box does
not appear.
Manual Updates
Periodically, updates are made to our manuals. You can access these updated manuals on the
MPC Support site at http://support.mpccorp.com. Please note that not all of the manual updates
will be applicable to your system. Complete the following steps to search for manual updates:
1. Go to the MPC Support Web site at http://support.mpccorp.com.
2. Click the Platforms link.
3. Click the Components link.
4. Click the Manuals link.
5. Search for the following part number: EMA001076-XX.
If the manual has been updated, the XX number will be greater than -00, such as -01, -
02, and -03. If you find a manual update, download the manual by clicking on the link and
following the on-screen instructions.
Note: A PDF version of the manual is also available for printing from the MPC
Support Web site.

MPC Computers, LLC NetFRAME 1420
System Safety and Care
Your MPC server has been manufactured to the highest quality standards. With proper care, it
should provide years of trouble-free service. The following sections provide information that will
help ensure your system has the longest life possible:
System Safety
Operating Environment
Cleaning
Protecting
System Safety
The following instructions pertain to the risk of fire, electric shock, or bodily injury. Please read all
of these instructions carefully and save them for later use.
Warning: Keep all packing materials away from children.
Follow all the instructions and warnings marked on this product or included in this manual.
Electrical Safety Precautions
Use the exact type of power cords as required.
Be sure to use power cord(s) that came with safety certifications.
The power cord(s) must be compliant with the AC voltage requirements in your region.
The power cord plug cap must have an electrical current rating that is at least 125% of
the electrical current rating of this product.
Plug the Power cord(s) into a socket that is properly grounded before turning on the
power.
Be aware of the locations of the power on/off switch on the chassis as well as the room's
emergency power-off switch, disconnection switch, or electrical outlet. If an electrical
accident occurs, you can then quickly remove power from the system.
Do not work alone when working with high voltage components.
Power should always be disconnected from the system when removing or installing main
system components, such as the system board, memory modules, and IDE/floppy drives.
When disconnecting power, first power down using the operating system and then unplug
all of the power supply units in the system.
To avoid making a complete circuit, which will cause electric shock, use only one hand
when working with powered-on electrical equipment.
Use extreme caution when using metal tools, which can easily damage any electrical
components or circuit boards.
Do not use mats designed to decrease static electrical discharge as protection from
electrical shock. Instead, use rubber mats that have been specifically designed as
electrical insulators.

MPC Computers, LLC NetFRAME 1420
10
The power supply cords must include a grounding plug and must be plugged into
grounded electrical outlets. Follow all the instructions and warnings marked on this
product or included in this manual.
MPC recommends storing and using this product on a surface or rack specifically
designed for that purpose. Do not use this product on an unstable surface. The product
might fall, causing serious damage.
Slots and openings in the server are provided for ventilation. To ensure the reliable
operation of your product and to protect it from overheating, these openings must not be
blocked or covered. Do not use this product on a sofa, rug, or other soft surface. This
product must never be placed near or over a radiator or heat register. This product must
not be placed in a built-in enclosure of any kind unless proper ventilation is provided.
Never push objects of any kind into the product through the cabinet openings. They may
touch dangerous voltage points or short out parts — possibly resulting in an electric
shock or a fire hazard.
Never spill liquid of any kind on the product.
This product must only be connected to the AC power source as indicated on the power
supply information label. If you are not sure of the type of AC power available, ask the
local power company. Only connect this product to a power outlet that matches the power
requirements of this product.
Do not allow anything to rest on the power cord. Do not place this product where people
might walk on the cord.
If you use an extension cord with this product, make sure that the total amperage rating
of all equipment plugged into it does not exceed the amperage rating of the extension
cord. Ensure that all the products plugged into the main AC power outlet do not exceed
15 amps.
Unplug the product from the main electrical AC power outlet before cleaning. Do not use
liquid or aerosol cleaning solvents directly on the product. Use a damp cloth for cleaning
the exterior surfaces.
Do not use this product near standing bodies of water or in humid environments.
Unplug this product from the main AC power outlet and call for service if any of the
following conditions occur:
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or corrosive liquids.
The product has been dropped, or the case has been damaged.
The product’s performance changes, indicating a need for service.
Warning: Do NOT open the power supply cover; hazardous voltages are
present. There are no user-serviceable components inside.
Warning: There is a danger of explosion if the onboard battery is installed
upside down, which would reverse its polarity. This battery must be
replaced only with the same or an equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Warning: This server may have come equipped with a CD-ROM drive. To
prevent direct exposure to the laser beam and hazardous radiation, do not
open the enclosure or use the unit in any unconventional way.

MPC Computers, LLC NetFRAME 1420
Operating Precaution
To ensure proper cooling and to avoid damage that is not covered under warranty, make sure
that the chassis cover is in place when the server is operating.
General Safety Precautions
Keep the area around the server clean and free of clutter.
Place the chassis top cover and any system components that have been removed away
from the system or on a table so that they won't accidentally be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits or be pulled
into a cooling fan.
Remove any jewelry or metal objects from your body. These are excellent conductors
that can create short circuits and harm you if they come into contact with printed circuit
boards or areas where power is present.
After ensuring that all connections have been made, close the system and secure it to the
rack unit with the retention screws.
To avoid injuries to the back, be sure to use your leg muscles, keep your back straight,
and bend your knees, when lifting the system.
After removing the components or chassis covers from the system, place them on a table
for safeguard.
Be sure to remove any jewelry or metal objects before working on the chassis to avoid
short circuits should these objects come into contact with power circuits.
After accessing the interior of the chassis, be sure to close the chassis with chassis
covers and secure the chassis to the racks with screws.
Electrostatic Discharge (ESD) Precautions
Before working inside your server, it is important to know how to protect it from Electrostatic
Discharge (ESD) damage.
Caution: Modules are Electrostatic Sensitive. A small electrostatic discharge
(ESD) can damage server components. An ESD-damaged module or PCI card
might not fail immediately, but over time it could become worse, possibly
causing an intermittent problem. Be very careful to handle the module or PCI
card ONLY by the edges. DO NOT touch the gold/silver edge-connectors or
any of the components on the system board. Leave the new module or PCI
card in the antistatic bag until you are ready to install it. Place the original
module or PCI card in an antistatic bag immediately after removing it from
the system.

MPC Computers, LLC NetFRAME 1420
12
Electrostatic discharge (ESD) is generated by two objects with different electrical charges coming
into contact with each other. An electrical discharge is created to neutralize this difference, which
can damage electronic components and printed circuit boards. The following measures are
generally sufficient to neutralize this difference and protect your equipment from ESD:
Use a grounded wrist strap designed to prevent static discharge.
Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready
for use.
Touch a grounded metal object before removing the board from the antistatic bag.
Do not let components or PCBs come into contact with your clothing, which may retain a
charge even if you are wearing a wrist strap.
Handle a board by its edges only; do not touch its components, peripheral chips, memory
modules, or contacts.
When handling chips or modules, avoid touching their pins.
Put the system board and peripherals back into their antistatic bags when not in use.
For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners, and the system
board.
Operating Environment
Temperature Concerns
The system specifications ensure the server will operate in ambient (room) temperatures up to
95°F (35°C). It is important to keep your server out of direct sunlight and away from other heat
sources (such as lamps and heating vents). Make sure the fan vents on your chassis are not
blocked.
If room temperature consistently exceeds 95°F (35°C), move the server to a cooler location to
keep it under the maximum temperature.
Moisture and Humidity Concerns
While your server will generally run better in cooler environments, there are server components
that are adversely affected by cold temperatures.
Caution: If your server arrives in cold weather, do not apply power to it or the
monitor until they come to room temperature.
Exposing the server to cold temperatures can produce condensation that can damage individual
components or destroy your system.
Warning: Never expose the server to moisture. Moisture exposure can lead
to an electrical shock or a fire hazard. Operating the server in areas with high
humidity can damage system components.

MPC Computers, LLC NetFRAME 1420
Temperature and Humidity Operational Levels
Operational (Powered On) Non-Operational (Powered Off)
Temperature 50°F to 95°F (10°C to 35°C) -40°F to 158°F (-40°C to 70°C)
Humidity up to 90% RH Non-condensing up to 95% RH Non-condensing
Other Environmental Concerns
High levels of dust, dirt, or smoke can also damage your server. Place the server in an area with
good ventilation. Periodically check the server's case, side, and bottom to ensure that dust or dirt
is not accumulating on the vents.
Shock, Vibration, and Altitude Operational Levels
Operational (Powered On) Non-Operational (Powered Off)
Shock 2 G, 11 ms, half-sine 50 G, 11 ms, half-sine
Altitude up to 10,000 ft up to 10,000 ft
Cleaning
If the case becomes dirty through constant use or handling, use only a damp, dust-free cloth for
cleaning. Do not use abrasives or solvents as these may mar or scratch the case.
Cleaning kits designed to clean floppy disk drives, DVD drives, and CD-ROM drives are available
at most computer stores and should be used periodically.
Protecting
To prevent normal electrical problems such as spikes or surges, install a high-quality power surge
protector between the wall outlet and all of the system's connected components. If even one
component is not connected to the surge protector, the entire system could be at risk. You should
note that some power strips are not surge protectors but simply extension cords.
If your local area is subject to frequent electric power failures, MPC recommends attaching an
uninterruptible power supply (UPS) to the server and monitor. The UPS should be connected to
an AC generator. A UPS will provide time to save all data files and properly turn off the system.
Caution: If a storm enters your area, completely unplug the entire system
from all electrical sources, including telephone lines. Electricity from
lightning can travel in on any line and destroy all connected components.
Transporting
Always shut the server off before moving it. Any sudden jar or shock may permanently damage
the hard disk. Hard disks are more resistant to shock if they are properly shut down before being
moved. If you are transporting the server over long distances, completely repackage it in its
original packing material. If the original packaging is unavailable, pack the server with as much
padding as possible to ensure that the components are not exposed to excessive vibration or
shock.

MPC Computers, LLC NetFRAME 1420
14
System Features
The following sections will help you locate and identify the components and connectors on your
server.
Features and Specifications
Server Chassis Views
System Interface
Features and Specifications
The NetFRAME® 1420 is a scaleable 1U rackmount server platform. The following is a general
outline of the system features and specifications.
Features and Specifications
Feature Specifications
CPU Single Intel® Celeron® D, or Intel® Pentium® 4, or Intel®
Pentium® D Processor (LGA 775 Socket)
Memory Four DIMM sockets supporting up to 8GB ECC DDR2 SDRAM
Chipset Intel E7230 chipset
Expansion
Slots
One universal PCI-X 133 MHz/PCI-Express x8 slot and one 32-
bit, 33 MHz (5V) PCI slot. The PCI-X 133 MHz slot is available for
use with the riser card included with the system (the PCI-Express
x8 slot is available for use with the optional CSE-RR1U-ELi riser
card).
BIOS 8 Mb Phoenix® Flash ROM
System Board Form Factor: ATX
Dimensions: 12 x 9.6 in (305 x 244 mm)
SATA
Controller
Intel ICH7R on-chip controller for 4-port SATA subsystem (RAID
0, 1, 5 and 10 supported)

MPC Computers, LLC NetFRAME 1420
SATA/IDE
Drive Bays
Up to 2 hot-swap SATA hard drives; 1 Slimline CD-ROM drive, 1
floppy drive.
Network
Interface
Integrated Dual Gigabit Ethernet
Peripheral
Drive Bays
One (1) floppy drive
One (1) slim CD-ROM drive
Chassis
Dimensions
and Weight
Form Factor: 1U rackmount
Dimensions: (WxHxD) 16.8 x 1.7 x 22.6 in. (426 x 43 x 574 mm)
Weight: Approximately 45lbs (shipping weight)
Server Chassis Views
The following sections will help you locate and identify the components and connectors on your
server.
Front Panel Views
Back Panel View
Control Panel Buttons and LEDs

MPC Computers, LLC NetFRAME 1420
16
Front Panel View
The figure below illustrates the features on the front panel of your NetFRAME® 1420 server
chassis.
Note: The appearance, location, and existence of the components
mentioned may vary by model.
Front Panel Layout
Front Panel I/O Definitions
Letter Definition
A 1" Hot-swap SATA Drive Bay (2)
B Slim CDROM (1)
C Floppy (1)
D Front Control Panel
Back Panel View
The figure below illustrates the connectors on the back panel of your NetFRAME® 1420 server
chassis.
Note: The appearance, location, and existence of the components mentioned may
vary by model.
Back Panel View
Back Panel Definitions
Letter Definition
A Power Supply Module
B Back Panel I/O Ports
C Full size PCI Expansion Slot (1)

MPC Computers, LLC NetFRAME 1420
Back Panel I/O
Note: The actual I/O Configuration of your system might be different from the one
shown above.
Control Panel Buttons and LEDs
The control panel located on the front of the chassis has buttons and LEDs. LEDs indicate power
on, network activity, hard disk drive activity and overheat/fan fail conditions. The control panel
also includes a main power button and a system reset button.
Control Panel Buttons and LEDs
LED Button Definitions
Letter Description
D Power Button: This is the main power switch, which is used to apply or turn off the
main system power. Turning off system power with this button removes the main
power but keeps standby power supplied to the system.
E Reset Button: The reset switch reboots the system.

MPC Computers, LLC NetFRAME 1420
18
F Power Indicator: Indicates power is being supplied to the system's power supply
units. This LED should normally be illuminated when the system is operating.
G HDD Activity: Channel activity for all HDDs. This light indicates CD-ROM and SATA
drive activity when flashing.
H NIC1: Indicates network activity on JLAN1 when flashing.
I NIC2: Indicates network activity on JLAN2 when flashing .
J Overheat/Fan Fail: When this LED flashes, it indicates a fan failure. When on
continuously it indicates an overheat condition, which may be caused by cables
obstructing the airflow in the system or the ambient room temperature being too
warm. Check the routing of the cables and make sure all fans are present and
operating normally. You should also check to make sure that the chassis covers are
installed. Finally, verify that the heatsinks are installed properly. This LED will
remain flashing or on as long as the indicated condition exists.
LED Control Panel LED Button Descriptions
Server Installation
This section provides a quick setup checklist to get your system up and running. Follow the steps
in the following sections in order to get the system operational in a minimal amount of time.
Unpacking the System
Preparing for Setup
Server Precautions
Rack Installation
Unpacking the System
Inspect the box the system was shipped in and note if it was damaged in any way. If the server
itself shows damage, file a damage claim with the carrier who delivered it.

MPC Computers, LLC NetFRAME 1420
Decide on a suitable location for the rack unit that will hold the system. It should be situated in a
clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise, and
electromagnetic fields are generated. Place it near a grounded power outlet. Read the Server
Precautions and Rack Precautions.
Preparing for Setup
The box the system was shipped in should include two sets of rail assemblies, two rail mounting
brackets, and the mounting screws. Follow the steps in order to complete the installation process
in a minimal amount of time. Please read this section in its entirety before you begin the
installation procedure.
Choosing a Setup Location
Leave enough clearance in front of the rack to open the front door completely (~25
inches).
Leave approximately 30 inches of clearance in the back of the rack for sufficient airflow
and ease in servicing.
Caution: Please read all Rack and Server precautions before beginning
installation.
Server Precautions
Review the electrical and general safety precautions.
Determine the placement of each component in the rack before you install the rails.
Install the heaviest server components on the bottom of the rack first, and then work up.
Use a regulating uninterruptible power supply (UPS) to protect the server from power
surges, voltage spikes and to keep your system operating in case of a power failure.
Allow the power supply units to cool before touching them.
Always keep the rack's front door and all panels and components on the servers closed
when not servicing to maintain proper cooling.
Electrostatic Discharge (ESD) Cautions
Leave the module in the antistatic bag until you are ready to install it.
The system should be opened on an ESD-safe workbench, and the technician should
wear an ESD-safe smock with grounding wrist and foot straps.
Keep DIMMs in the antistatic bag while transporting, especially when crossing carpet.
Antistatic wrist straps with clip-on ends are available commercially.
Caution: The system board conforms to the new PCI 2.2 specification. This
requires 3.3v standby for all PCI slots, DIMM banks, and PS/2 outputs
(KB/PS/2 Mouse). Always remember to unplug the AC power cord before
adding any PCI cards, memory, or plugging/unplugging the keyboard or
mouse. Otherwise, the system may automatically power up when adding the
component. This could damage the system board or the component you are
adding and is not covered under warranty.

MPC Computers, LLC NetFRAME 1420
20
Safety: Before You Remove the Access Panel
Before removing the access panel for any reason, observe these safety guidelines.
Turn off all peripheral devices connected to the server.
Turn off the server by pressing the power button on the front of the chassis. Then unplug
the AC power cord on the back of the chassis.
Disconnect all peripheral cables and all telecommunication lines connected to the I/O
connectors or ports on the back of the chassis.
Warning: The power button on the front panel DOES NOT turn off the AC
power. To disconnect power from the server, you must unplug the AC power
cord from the wall outlet or the chassis.
Warning: Hazardous electrical conditions may be present on power,
telephone, and communication cables. Turn off the server and disconnect
the power cords, telecommunications systems, networks, and modems
attached to the server before opening the server case. Otherwise, personal
injury or equipment damage can result.
Warning: Hazardous voltage, current, and energy levels are present inside
the power supply. There are no user-serviceable parts inside the power
supply; servicing should be performed by technically qualified personnel.
Caution: For proper cooling and airflow, always install the access panel
before turning the server on. Operating the server without the access panel
in place can damage system parts.
Rack Installation
This section provides information on installing the system into a rack unit. There are a variety of
rack units on the market, which may mean the assembly procedure will differ slightly. The
following is a guideline for installing the system into a rack using the rack rails provided with the
system. Refer to the installation instructions that came with the rack unit you are using.
Rack Installation Safety
Rack Precautions
Installing Inner Rails
Installing Outer Rails
Open Rack Installation
Rack Installation Safety
Your NetFRAME® 1420 chassis comes equipped with a rack mount kit that can be configured for
front-mount, mid-mount, or 4-post racks. An optional slide rail kit may be purchased separately.
Each kit contains instructions for installation into a rack or cabinet. Read the following instructions
prior to installing your server in a rack.