MREL Blaster's Ranger II Lt User manual

Lt QUICK START GUIDE
1 2 3
A: EXTEND TRIPOD LEGS.
B: POSITION GRIP BALL HEAD.
REMOVE THE LENS COVERS FROM BOTH THE
CAMERA AND THE LENS THEN ATTACH THE
CAMERA LENS TO THE CAMERA AND TWIST
INTO PLACE.
OPEN THE SIDE DOOR AND INSERT THE SD CARD. INSERT THE I/O CABLE.
CONNECT THE
TRIGGER CABLE
TO THE I/O CABLE.
ROTATE GRIP BALL HEAD
UNTIL SECURE ON TRIPOD.
SECURE THE MOUNTING ADAPTER ON TO CAMERA.
ENSURE A TIGHT FIT.
USING THE MOUNTING
ADAPTER SECURE THE
CAMERA TO THE TRIPOD.
4 5
6 7 8
A
B

APERTURE
ZOOM
FOCUS
9 10
CONNECT AC ADAPTER TO A
POWER SOURCE AND THEN INSERT
THE POWER CABLE INTO THE CAMERA
POWER ON THE CAMERA
13
SET THE APERTURE TO THE LOWEST
NUMBER AND THEN ADJUST THE ZOOM, APERTURE AND FOCUS
ON THE LENS TO OBTAIN THE PERFECT PICTURE
12
11
15
16
REVIEW THE VIDEO WITH THE ABOVE BUTTONS ON THE LAPTOP
SCREEN. WHEN READY PRESS THE SAVE BUTTON.
PRESS THE TRIGGER SWITCH AND THE SUBJECT WILL BE VIDEO RECORDED.
PRESS THE DESTINATION BUTTON AND CHOOSE THE SD CARD.
PRESS THE SAVE BUTTON TO SAVE THE VIDEO.
14
CONNECT THE ETHERNET
CABLE BETWEEN CAMERA AND LAPTOP
OPEN FASMOTION OR
ANY BROWSER, FIND THE
CAMERA AND SELECT THE
SUITABLE FRAME RATE
AND RESOLUTION