MTX Thunder 942 User manual

RCA Input
AMPLIFIER
CAR STEREO
(SOURCE UNIT)
REQUIRED INSTALLATION
TOOLS:
For installation options go to mtx.com
Adjustable Wrench • Crimpers • Screw Driver
Amplifier Input Connections
Utility Knife
Power Drill
Part #: NDM242
Remote/Power Antenna
Turn-On Wire
AMP
X-OVER
LP FR HP
AMP
X-OVER
LP FR HP
LP FR HP
FR HP
FR HP
Separates
AMP
X-OVER
LP FR HP
AMP
X-OVER
LP FR HP
LP FR HP
FR HP
FR HP
Co-Ax
AMP
X-OVER
LP FR HP
AMP
X-OVER
LP FR HP
LP FR HP
FR HP
FR HP
Co-Ax
AMP
X-OVER
LP FR HP
AMP
X-OVER
LP FR HP
LP FR HP
FR HP
FR HP
Separates
AMP
X-OVER
LP FR HP
AMP
X-OVER
LP FR HP
LP FR HP
FR HP
FR HP
Subwoofer
Amplifier Crossover Select
Switch Settings:
When used with Subwoofer Amplifier:

Grommet
AMPLIFIER
Amplifier Output Connections
For installation options go to mtx.com
Disconnect
Battery Negative (-) Cable
Prior to Installing Amplifier
Minimum Wire Size:
Power: 1/0 AWG. Ground: 1/0 AWG. Remove Paint
from Metal
Connect to Car Stereo
Remote/Power Antenna
Turn-On Wire
Ground To Metal Of Vehicle
CAUTION: This amplifier may draw in excess of 150 Amps of current.
Upgrading the vehicle’s factory battery and alternator may be required.
(For specific details, contact your local authorized MTX dealer, or call 1-800-CALL-MTX.)