Pairing Your Device with the DBoom
Standard Pairing
1. Move the Power switch to“On”.The DBoom will say“Power
On”once the power is on.
2. On your portable device, turn Bluetooth on, search for Bluetooth
devices, and select“DBoom”.
3. If you are prompted to enter a password to Complete
pairing ,enter 0000.
4. DBoom will connect to your device and be ready for use.
NFC Pairing
If your device supports Near Field Communication technology
(NFC),you can quickly pair your phone By following these
instructions:
1. Move the Power switch to “On”.The DBoom
will say ,“Power On”…[ pause]…Pairing”.
2. Hold your device to the top right corner of the
back of the DBoom Speaker.
3. A prompt will appear on your device asking if your want to
connect with the DBoom-select“OK ”or “Yes ”.
4. The DBoom will connect to your device and be ready fo use.
Note:
Once you have completed the initial pairing process,
Your mobile device will automatically search for and
Connect to the DBoom when Bluetooth is turned on and the
DBoom is in range. To connect to other Bluetooth devices you must