MustHD M501H User manual

1
Contents
Welcome………………………………………………………………...02
FCC Notice.………………………….……..…………………………….03
Disposal Notice………………………………………………………….03
Precaution…………………………….……..…………………………….03
Package Contents………………………………………………………...06
Main Features……………………………………………………………..07
Parts & Functions………………....………………………………………08
Get Started……………………....………………….……………………10
Install Sun-Hood………………………….……………………10
Open/Close Sun-Hood………………..………………………10
Install Battery Plate………………………………………..11
Connect DC Power Supply…………………………………..13
Fix HDMI Connector……………….…………………………13
Menu Tree & Adjustment……………….………………………………14
Menu Operations………………………………………………………….14
Picture………………………………………..……….….….15
Color …… ……… …… .. ………… ………… … ... ……… 16
Guide Box…………………..………………………...………17
Function………………………………………………………..18
F Ke y … . …… … … … … … …… … … …… … … … … … … 2 1
System……………………………………………………22
Specifications……………………………………...………………………23
Customer Support……………………………………………………….24
Warranty Card……………………………………………………………..25

2
Welcome
Thank you for your choice of our M501H filed monitor. This high-tech
while easy to use monitor can better your photography journey.
We recommend reading this manual first to get the best out of this unit.
FCC Notice (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for
class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interface when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency
energy. If not installed and used in accordance with the instruction, it
may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment on the off, the user is encouraged to try to correct the
interference by one or more the following suggestion.
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to a different power outlet other than the
one where the receiver is connected.
Consult an experienced television or radio technician for help.

3
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packing indicates that this product
shall not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequence for the
environment and human health, which could otherwise be caused by
inapposite waste handling of the product. The recycling of material will
help to conserve natural resources.
Precaution
Always use set voltage. (DC 6-12V)
All operating instructions must be read and understood before the
product is operated. These safety and operating instructions must
be kept in safe place for future reference.
Do not use attachments not recommended by the manufacturer.
Use of inadequate attachments can result in accidents.
This product must be operated on a power source specified on the
specification label.
Never insert an object into the product through vents or openings.
High voltage in the product, and inserting and object can cause
electric shock and/or short internal parts. For the same reason, do
not spill water or liquid on the product.
Do not attempt to service the product yourself. Removing covers
can expose you to high voltage and other dangerous conditions.

4
Request a qualified service person to perform servicing.
In case the product needs replacement parts, make sure that the
service person uses replacement parts specified by the
manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can
result in fir, electric shock and/or other danger.
Upon completion of service or repair work, request the service
technician to perform safety checks to ensure that the product is
in proper operating condition.
When mounting the product on a wall or ceiling, be sure to install
the product according to the method recommended by the
manufacturer.
Unplug the power cord from the DC outlet before cleaning the
product. Use a damp cloth to clean the product. Do not use liquid
cleansers or aerosol cleaners.
Unplug the power cord from the AC outlet if you do not use the
product for considerably long time.
Do not use the product near water, such as bathtub, washbasin,
and kitchen sink and laundry tub swimming pool and in a wet
basement.
Keep the product away from direct rays of the sun-light.
Do not place the product on an unstable cart, stand, tripod or table.
Placing the product on an unstable case can cause the product to
fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, Plate or table
recommended by the manufacturer or sold with the product.
When mounting the product on a wall, be sure to follow the
manufacturer’s instruction. Use only the mounting hardware
recommended by the manufacturer.

5
When relocating the product placed on a cart, it must be moved
with the utmost care.
Sudden stops, excessive force and uneven floor surface can
cause the product to fall from the cart.
The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since
insufficient ventilation can cause overheating and/or shorten the
life of the product. Do no place the product on a bed, sofa, rug or
other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place
the product in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the manufacturer’s
instructions are followed.
In case of installation the product on the rack, the inside of the
product would be overheated due to heat from other devices near
by and the decrease of air circulation, which could damage to the
monitor. To prevent the damage, please have enough space for
the monitors and use fan to avoid heat and maintain the operating
temperature. (refer to the specification of the product).
The LCD panel used in this product is made of glass. Therefore, it
can break when the product is dropped or applied with impact. Be
careful not to be injured by broken glass pieces in case the LCD
panel breaks.
Keep the product away from heat sources such as radiators,
heaters, stoves and other heat generating products (including
amplifiers).

6
Package Contents
M501H Field Monitor
Sun-Hood
User Manual
DC Power Adapter
HDMI Cable
Wired Remote
Button
Battery Plate
F970
Battery Plate
LP-E6
(optional)
Battery Plate
D28S
(optional)
Screws (8pcs)
Carry Bag
(optional)

7
Main Features
·All-in-one type system
A compact and lightweight
field monitor designed for
entry-level use.
·HDMI Input/output
·5 inches 800*480 Resolution
·Software Features
·Focus Assistance
·Focus Peaking Color (RGB)
·False Color
·Exposure
·Scale Mode
·Pixel to Pixel
·Camera Mode
·Zoom
·Single Color
·V/H Mirror
·Nine Grid
·Audio out
- Internal speaker / Stereo audio
out through phone jack.
·Unique Sun-Hood
- Very easy to install/uninstall
·Camera Mode Button
- No black screen when video
recording started; No
distortion; Display size
maximized
·Knob control
- Easy to adjust user
configuration by using the
control knob.
·Wired Remote Button
- Helps to self-define
regularly-used function!
·Fit Markers
- Center marker, safety area
marker, aspect marker, display
size (scan)
·Multiple Battery Plate/DC
- Easy to install/uninstall
·Additional features
·350-nits brightness,
·500:1 contrast,
·7 OSD languages

8
Parts & Functions 1/2
FRONT/SIDE/TOP
1
Camera Mode
7
MENU/EXIT
2
Focus Assistance
8
Encode Knob
3
Self-define Function Key#1
9
Earphone jacket hole
4
Self-define Function Key #2
10
Sun-Hood
5
Self-define Function Key #3
11
1/4"-20 Threaded Mounting
6
Zoom
12
Wired Remote F Key

9
Parts & Functions 2/2
BOTTOM/ REAR
13
1/4"-20 Threaded Mounting
18
Battery Plate Connecting Pin
14
HDMI Input
19
Batter Plate Fixing Groove
15
HDMI Loop-through
20
Battery Plate Fixing Hole
16
HDMI Holder Screw Hole
21
Power On/Off Switch
17
DC Power Input