mySmartObject IOT-710 User manual

1. In brief
MySmartObject®
IOT-710
Quick start guide
www.mysmartobject.com
[e-mail]
1.2 Spectifications
1.1 Features
• Low battery alert
• Small and light
• 3 years standby time
• IP66 dust and waterproof
• Remove-alert
• Remote setting
•GPS + LBS location
Communication GSM
850/900/1800/1900MHZ
Location Accuracy <10 meters
Voice monitoring
range
≤5 meters
Working current 60mA
Standby time 3 years (1 position/day)
Working
temperature
-20°C to 70°C
Dimension 80mm(L)*50mm(W)*30mm
(H)
2. Appearance
Quick flashing Low battery
Slow flashing Normal
No light Power loss or sleep mode
3. Getting started
Set SOS number via APP, GPS tracking platform or SMS
(SMS only valid at tracking mode).
1.SMS command to add SOS number:
SOS,A,number 1,number 2,number 3#
E.g.SOS,A,1351234xxxx,1371234xxxx,1301234xxxx#
2.SMS command to delete SOS number:
SOS,D,number sequence 1,number sequence 2, number
sequence 3# Eg. SOS,D,1,2,3#
3.2 Working mode
Note: When device boots for the first use, there are 3 minutes
time to set the mode.
2.1 Device
2.2 LED display
1) Red LED (power status)
2) Blue LED (GPS status)
Quick flashing GPS signal searching
Slow flashing GPS located
No light GPS is not working or sleep
mode
3) Green LED (GSM satus)
Quick flashing GSM initializing
Slow flashing Normal
No light No GSM signal or no SIM or
sleep mode
3.1 SOS number setting
Please confirm your choice before turning the device on. If
you fail to set the mode in this 3-min period, device will enter
into defaulted mode: Ultra-standby mode. In this case device
will wake up and upload location in 24 hours. Any command
to change the mode would be activated in 24 hours.
1)Ultra-standby mode:
In defaulted mode device wakes up once daily to update one
position, then enters into sleep status, during which period
not any query function could be activated. User can set the
sleep period by SMS command:MODE,2,T1,T2# 2 means
ultra-standby mode.T1 means the start time of sleeping
period which format is HH:MM.Defaulted setting is the time
when device boots up. T2 means the sleep time interval
which options are 1, 2, 3, 4, 6, 8, 12, 24 (hours). Defaulted
setting is 24 hours.Note: SMS command takes effect after
device wakes up.E.g.MODE,2,13:00,8# (Meaning: Device
starts to fall asleep at 13:00, and wakes up every 8 hours)
2)Tracking mode:
User can set the working period by APP or tracking platform
or SMS.
MODE,1,T1,T2#
1 means tracking mode.
T1 means the time interval to upload location, ranges from
10-1800 (seconds)
T2 means the working duration, ranges from 5-43200
(minutes)
Note: SMS command takes effect after device wakes up.
E.g.MODE,1,30,5# (Meaning: When device wakes up, it
would work for 5 minutes, during which period, it uploads
locations per 30 seconds.)

GPS Asset tracker
IOT-710
Please read carefully before use.
5. Mobile app
The MySmartObject app is available :
9. Caution & Notice
Download the app
on the App Store or
Google Play Store,
depending on your
smartphone type.
Use this QR code to
download the app
user guide :
To add a new device to your mobile
app account, click the [+] button and
scan the device bar code or enter
manually the IMEI number indicated
on the packaging.
Use your credentials to login and
then complete your personal
information.
To create geofence, select a zone
manually and then choose if you
want to receive an alert when
entering ou leaving this zone.
You can choose if you want to
receive an alert via email or a Push
notification.
You will be able to
access the real time
location of your
vehicle, object or
person, its latest
positions and trips.
3.3 Remove alert
In ultra-standby mode, after device is fixed for 3
minutes, it enters into arming status. In this case if
the device detects itself being removed/taken off
from the target, alert would be automatically
uploaded. Device would enter into tracking mode for
20 minutes and then turn back to ultra-standby
mode.
If device receives command to cancel the alert
within these 20 minutes, it would instantly turn back
to ultra-standby mode. Anti-removed mode would
activate again in 3 minutes.
Issue command from the platform to cancel the
Remove alert : cancel#
•Please use the original battery from
factory. Any unauthorized accessory
would invalidate warranty service.
•Manufacturer shall not bear any
responsibility from any damage caused
by unauthorized accessory.
•Do not dip the battery into water or fire.
•Do not distort or break the battery.
•Do no disassemble the device.
•Battery is disposable, not allowed for
recharge.
4. Installation
To fix the device on an asset, please stick the 3M
foam tape on the backside of the non-magnetic
model to your target. For magnetic model, directly
stick it on the metal.