Nakamichi SHOCKWAFE ULTRA 9.2 User instructions

120V~60Hz0.6A
RISQUEDE CHOC
ELECTRIQUE/ NE PAS OUVRIR
AVIS:
DTS,the Symbol, and DTS-HD are registered trademarks of DTS, Inc.
6.5 ft (2m)6.5 ft (2m)
SETTING UP YOUR
HOME THEATER
Note:
Illustration is not to scale. Speaker stands are not included.
Dipole Setup: Surround speaker drivers should be at ear level and pointed away from the listener’s sitting area.
9.2 Setup: Surround speaker drivers should be at ear level and pointed right at the listener’s sitting area.
3.2 ft (1m)
Clearance
3.2 ft (1m)
Clearance
9 ft (2.5m)
distance
5 ft (1.5m) 5 ft (1.5m)
1a. Soundbar & Subwoofer placement
Recommended distance. Can be more or less based on different room sizes.
Sub
Left
Sub
Right
1b. Surround speakers placement
6.5 ft (2m) 6.5 ft (2m)
6.5 ft (2m) 6.5 ft (2m)
6.5 ft (2m)
6.5 ft (2m)
90 -110
o o
90 -110
o o
90 -110
o o
90 -110
o o
90 -110
o o
90 -110
o o
90 -110
o o
90 -110
o o
BETTER
OPTION B OPTION B
OPTION A OPTION A
SURROUND
BACK LEFT
SURROUND
BACK RIGHT
SURROUND
LEFT SURROUND
RIGHT
DETACHED: 9.2Ch SETUP
BEST
ATTACHED: DIPOLE SETUP
3.2 ft (1m)3.2 ft (1m)

2AGB6SWPRO51
®®
SHOCKWAFE
SHOCKWAFEPRO 5.1
,DolbyAudio and the
double-D
1612
120V~60Hz0.6A
2AGB6SWPRO51
®®
RISQUEDE CHOC
ELECTRIQUE/ NE PAS OUVRIR
AVIS:
DTS,the Symbol, and DTS-HD are registered trademarks of DTS, Inc.
2. Connecting with a TV and other devices
3. Setting up satellite speakers to the subwoofer
Connect source devices such as a Blu-ray Disc
player, cable box, or satellite box to any of the
HDMI IN jacks (HDMI 2/3/4) on the Sound Bar. If
source devices are currently connected to a TV,
disconnect them from the TV and connect them
directly to the Soundbar to get the highest quality
surround sound of Dolby Audio, DTS-HD Master
Audio and DTS-X.
TV HDMI ARC Connection to Soundbar.
Is the HDMI IN jack on your TV labeled ARC?
YES NO
ARC
HDMI
HDMI
Devices
TV
(ARC)
OPTICAL
Devices
TV
(Optical)
If the TV is not compatible with HDMI ARC,
connect the TV’s OPTICAL OUTPUT jack to the
Sound Bar’s OPTICAL INPUT.
Note :
Make sure that the cables are firmly inserted.
Back of Sound Bar
Back of Sound Bar
DIPOLE 9 CH
POWER
PAIRING
USB
AC IN POWER
PAIRING
USB
AC IN
Connect:
LEFT Speaker to LEFT port
on the subwoofer
RIGHT Speaker to RIGHT port
on the subwoofer
LEFT
BACK SURR
LEFT
SURR
LEFT
BACK
RIGHT
BACK
RIGHT
SURR
RIGHT
BACK SURR
DIPOLE 9 CH

43
RIGHT SPEAKER
POWER
PAIRING
USB
AC IN
Setting up the
remote control
Turn on the TV
POWER ON
7. Turning on the Shockwafe Ultra 9.2
4. Detaching the speakers for 9.2 setup
(1) Connect the AC power cords of the
soundbar and wireless subwoofers.
(2) Press (power) on the remote
control of the sound bar.
(3) The front panel display lights up.
(4) Confirm that the power indicator of
the subwoofer is lit in BLUE LED.
(5) Turn on the source device.
Place the rubber stoppers into the slots. Unscrew the catch and place the
rubber stoppers into the slots.
5. 6.
+
+
-
120V~60Hz0.6A
2AGB6SWPRO51
®®
SHOCKWAFE
SHOCKWAFEPRO 5.1
,DolbyAudio and the
double-D
1612
RISQUEDE CHOC
ELECTRIQUE/ NE PAS OUVRIR
AVIS:
DTS,the Symbol, and DTS-HD are registered trademarks of DTS, Inc.
Back of BOTH Subwoofer
Flip the power switch into
the ON position.
1 2
LEFT SPEAKER
Flip the switch at
the back of the
rear speakers
from DIPOLE to
9 CH.
DIPOLE 9 CH
LEFT
BACK
RIGHT
BACK
DIPOLE 9 CH

8. Listening to your soundbar system
SETTING UP YOUR HOME THEATER
To listen to the audio of the TV
Select the desired program using the remote control of the TV.
(1) The screen switches to the television programming and the TV audio is
output to the Sound Bar.
(2) If there is no sound, press HDMI ARC on the remote control of the
Sound Bar until “ARC” appears in the front LED Display panel.
To enjoy an input device other than the TV
Select the HDMI input or Digital (Optical/Coaxial) input using the Sound
Bar remote control.
(1) The Sound Bar will change input according to your selection. Input
selection will appear in the front LED Display panel
Adjust the volume
(1) Adjust the volume by pressing Vol +/− on the remote control of the
Sound Bar.
(2) Adjust the volume of the subwoofer by pressing Bass +/− on the
remote control of the Soundbar.
(3) For details on the EQs adjustment, refer to “Accessing EQs on your
Remote pg. 28” in the User Manual (separate document).
Note:
When using HDMI 2/3/4 via HDMI ARC to your TV, make sure that the
TV’s source is switch to the HDMI ARC.
Setup completed! Enjoy!
HDMI 2HDMI 3
CENTR
CENTR
+
+
+
+
+
++
+
MOVIE ENTER
TAINMENT
LED
SIZE
MUSIC
V S D DSP
CLEAR VOICE
SETUP
RETURN INFO
LED DIMMER
BASS VOL
MENU
ENTER
STEREO PURE DIRECT DSP OFF
SUR
ON
SUR
OFF
TREB
TREB
LIP
SYNC
SB L/R
SB L/R
S L/R
S L/R
LIP
SYNC
OPTICAL
2
AUX
BLUETOOTH / USB MODE ONLY
SYSTEM MEMORY
HDMI
ARC
INPUT
SELECTION
VOL +/-
HDMI 4COAXIAL
USB
1NIGHT
ROOM SIZE
DIALOG CONTROL
POWER
ON/OFF
Troubleshooting:
For comprehensive troubleshooting guide, visit https://www.helpdesk.nakamichi-usa.com/
No TV sound is output from the system, or no picture is displayed on the TV.
• Press HDMI ARC on the remote control of the Sound Bar until “ARC” appears in the front panel display on the Sound Bar.
• Make sure that the input and output of the HDMI jacks on the Sound Bar are correct.
• Disconnect the cables that are connected between the TV and the Sound Bar, then connect them firmly again. Disconnect the AC
power cords of the TV and the Sound Bar from the AC outlets (mains), then connect them again.
• Depending on the order in which you turn on the TV and the Sound Bar, the Sound Bar may enter muting mode and “Mute” may
appear in the front panel display. In this case, turn on the TV first, then the Sound Bar.
• When the TV and the Sound Bar are connected via an HDMI cable, enable the HDMI-CEC control for HDMI function on the TV. For
details on the TV’s settings, refer to the operating instructions supplied with the TV. For more information about the Sound Bar
HDMI-CEC control for HDMI function, refer to the User Manual - Advance Setup: HDMI pg. 17 (separate document).
• Check the sound setting of the TV. When the TV is connected to the Sound Bar, change the audio setting on the TV to external speak-
ers.
No picture or sound from the device connected to the system is output.
• Press input source on the remote control of the Sound Bar until the input connecting the desired device appears on the front panel
display of the Sound Bar.
• Make sure that the input and output of the HDMI jacks on the Sound Bar are correct.
• Disconnect the cables connected to the system, and then connect them again. Make sure that the cables are firmly inserted.
No sound or only a very low-level sound is heard from the subwoofer.
• Press Vol +/− on the remote control of the Sound Bar to increase the volume.
• If experiencing any audio cuts or static,check your audio format and make sure that it is set to BITSTREAM not PCM. Refer to
www.helpdesk.nakamichi-usa.com/audio-settings
If the problem is not solved even though you have tried the measures above, refer to “Help & Troubleshooting, pg. 37” in the User
manual (separate document).
STOP PLEASE DO NOT
RETURN THIS UNIT
24HRS
OR LESS
RESPONSE TIME
GUARANTEED
Talk to a SHOCKWAFE sound bar specialist
[email protected]
Web support: www.nakamichi-usa.com/faq Phone Support: [phone] (Mon - Fri 10am - 7pm PST)