NAPOLI ELECTRONICS NPL-LED 3230 User manual

1
CONTENTS
1 PREFACE·····································································································2
2 SAFETY PRECAUTIONS ················································································2
3 FRONT , BACKAND REAR CONNECTIONS ·····················································3
4 TV INSTALLATION GUIDE ············································································4
4.1 CONNECTINGANTENNAS DRAWING ·······················································4
4.2 AV INPUT DRAWING··············································································4
4.3 PC (VGA) INPUT DRAWING ·····································································4
4.4 HDMI INPUT DRAWING ··········································································4
4.5 COAXIAL DRAWING ··············································································5
4.6 YPBPR INPUT DRAWING·········································································5
4.7 EARPHONE DRAWING············································································5
5 CONFIGURATION OF THE LED······································································6
5.1 PICTURE SETTING ·················································································6
5.2 SOUND SETTING ···················································································6
5.3 TIME SETTING ······················································································7
5.4 LOCK SETTING······················································································7
5.5 SETUP SETTING·····················································································8
5.6 CHANNEL SETTING················································································8
USB INSTRUCTIONS ···················································································· 13
6REMOTE CONTROL INSTRUCTIONS ··························································· 17
7REMOTE CONTROLS SETUP······································································· 19
7.1 BATTERY USAGE CAUTION ·································································· 19
8ACCESSORIES ··························································································· 19
9 TROUBLE SHOOTINGAND ADVICE ····························································· 20
10 SPECIFICATIONS······················································································21

2
1 PREFACE
Thank you for buying this LED TV! Please read this manual thoroughly before operating the monitor.
Make sure the monitor was not damaged in transit. Should the monitor is damaged, do not install it and
contact your dealer. Check that you have all the accessories according to the model.
2 SAFETY PRECAUTIONS
Put the monitor on a stable surface.
Do not use the monitor with others fixations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
If you have a wall mount, check that it is steady.
Do not block or cover the ventilation openings on the monitor
Power source
The monitor must be plugged with a tension source of 100-240V and 50/60 Hz.
Connection cables
Power cord and cables must be properly routed and protected to prevent people from stepping
on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources.
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, does not use spare parts other than those suggested by the
manufacturer. Using inadequate spare parts can lead to electric shocks short-circuits fire or
other incidents.
Departure in holidays
Unplug the TV during lighting storms or when unused for long periods of time.

3
3Front , BackAnd Rear Connections of LED
Front View
Back View
（The backview is only for your reference;details according to the model）
Rear Connection
1. AV/TV select
2. Menu key
3. Channel up/down
4. Volume up/down
5. STANDBY
6. Remote control sensor

4
4TV INSTALLTION GUIDE
4.1 CONNECTINGANTENNAS DRAWING
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown
can be sourced from TV equipment shops, which will provide service for correct installation and
connection. After installation, insert the 75-ohm antenna plug into the antenna jack as show in case of
signal of closed circuit TV
4.2 AV INPUT DRAWING
4.3 PC (VGA) INPUT DRAWING
4.4 HDMI INPUT DRAWING

5
4.5 COAXIAL DRAWING
4.6 YPBPR INPUT DRAWING
4.7 EARPHONE DRAWING

6
5 CONFIGURATION OF THE LED
5.1 PICTURE SETTING
Press <MENU> Key, then enter the Menu.
a) Press ▼and enter Picture Setting Menu. Press ▲or ▼key and enter Picture Mode、Contrast、
Brightness、Colour、Tint、Sharpness、Colour Temp、Noise Reduction.
b) Press ◄or ►key to access and adjust Picture Mode、Contrast、Brightness、Colour、Tint、Sharpness、
Colour Temp、Noise Reduction.
5.2 SOUND SETTING
Press < MENU >, then press ►key
a) Press ▼, then enter Sound Setting Menu. Press ▲ or ▼ key to enter Sound
Mode,Treble,Bass,Balance,Auto Volume,SPDIF Mode,AD Switch.
b) Press ◄or ►Key to access and adjust Sound Mode,Treble,Bass,Balance,Auto Volume,SPDIF
Mode,AD Switch.

7
5.3 TIME SETTING
Press <MENU> key, then press►key
a) Press ▼, then enter TIME Setting Menu. Press ▲or ▼key and enter Clock,Time
Zone,Region,Sleep Timer, Auto Standby.
b) Press ◄ or ► key to access and adjust Clock,Time Zone,Region,Sleep Timer, Auto Standby.
5.4 LOCK SETTING
Press <MENU> key, then press►key
a) Press ▼, then enter LOCK Setting Menu. Press ▲or ▼key and enter Lock System,Set
Password,Block Program,Parental Guidance.
b)Press ◄ or ► key to access and adjust Lock System,Set Password,Block Program,Parental
Guidance.
Note：The initial password is 0000, universal password is 4711

8
5.5 SETUP SETTING
Press <MENU> key, then press► key.
a) Press ▼ then enter SETUP Setting Menu. Press ▲or ▼key and enter OSD Language, Audio
Languages,PVR File System,Caption,Aspect Ratio,Blue Screen,Restore Factory Default,Reset Menu
System.
b) Press◄or►key to access and adjust OSD Language, Audio Languages,PVR File
System,Caption,Aspect Ratio,Blue Screen,Restore Factory Default,Reset Menu System.
5.6 CHANNEL SETTING
Press <MENU> key, then press ►key,
a）Press ▼ then enter CHANNEL Setting Menu. Press ▲or ▼key and enter Auto Tuning, DTV Manual
Tuning,ATV Manual Tuning, Programme Edit, Signal Information,Software Update（USB）.
b）Press◄or►key to access and adjust Auto Tuning, DTV Manual Tuning, ATV Manual Tuning,
Programme Edit, Signal Information,Software Update（USB）.

9
PVR Function list
Item
Record directly
1.Press●button to record the current program.
Press to stop recording.
2.File maximum size 3.9G byte , if surpass the capacity
it will divide the file to deposit.
Timer record
1.Use EPG to carry on the appointment record.
2.Support periodicity record /everyday record
/disposable record.
3.When the time appointment is conflict ,it will
produce a warning message.
Disk manager
1.Can delete a single file .
2.Provide Disk formatting functions.
Playback
1.You can play back the recorded program in Media/USB
Channel
Basic instructions
1.The storage location of out file
Press ▼/ ▲button to select Option in the main menu.
Press ▼/ ▲button to select PVR File System, then press OK button to enter.
Press ▼/ ▲button to select Select Disk , then press OK button to enter .
Use the external device(USB/CARD) to do appointment record.
You can switch partition in this interface.
2 . Check the USB speed
Press ▼/ ▲button to select Check PVR File System ,
then press OK button to enter .Then it will check the USB speed.

10
Recording methods
Mode1: Shortcut key
1.Press ●button to record the current program.
Press to stop recording.
2.Press STOP button to stop recording ,the it will return to normal broadcast television.
3.When the storage space of Disk is shortage. It will produce a warning message, then
it stops recording automatically and return to normal broadcast television.
4.Press index button to see the information of the recorded list .
Press INFO button to see the detail of the program.
NOTE: You can see detail about the DATE/TIME/DURATION/PROGRAM NAME/CHANNEL
NAME/DESCRIPTION
Mode2:Time shift
1.Press►button to start Timeshift.
This operation can make the frame still ,and record program at the backstage.