NASA electric NS-1116 User manual
NS-1116
NS-1116
Stand Fan
NS-1116
Stand Fan
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5
.
.
.
NS-1116
Stand Fan
6
L
.
“OFF .
.
ON
ISPEED
IIIII
MODE
STANDBY
.
OSCILLATION
L
7
.
.
STANDBY
.
.
:ON/SPEED
SPEED
OFF
OFF
OSC
OSC
TIMER
.
•
NS-1116
Stand Fan
8
-
7
3. Be careful not to spill water on the
fan or into the fan housing.
4. Always use a soft and wet cloth
soaked in mild detergent.
5. Do not use any of the following ma
terials for cleaning: Gasoline, thinner
and etc.
6. Do not attempt to repair the device
yourself in the event of a technical de
fect or doubt, as this may result in a risk
of fire or electric shock.
Cleaning
wet cloth. Do not try to remove the fan
blades.
around the engine compartment. The
motor or other electrical parts of the
device should not come into contact
with water.
Maintaining
Be sure to switch off the power supply
and pull out the plug before cleaning.
1. This machine only needs common
external cleaning and wiping.
2. Place into casing and store in the dry
position.
Correct Disposal of this product
This marking indicates that this
product should not be disposed
with other household wastes
throughout the EU. To prevent
possible harm to the environment, or
human health from uncontrolled waste
material resources. To return the used
device, please use the use the return
Power 60W
Frequency 50Hz
Voltage 220 -240V˜
and collection systems, or contact
the retailer where the product was
purchased. They can take the product
Technical Specifications
Guarantee and after sales service
This device has 18 month guarantee and
5 years after sales service, for more in
formation about guarantee and after sales
service condition please read the guaran
tee sheet in the end of this user manual.
NS-1116
Stand Fan
6
have to do is press the “STANDBY” button
to turn off the fan.
4. To increase the wind area inside the
room, press the “OSCILLATION” button,
then the fan will oscillate and the wind will
blow in a wider area of the room. To exit
this mode, all you have to do is press the
same button again. Moving the fan head
up or down will change the direction of the
wind.
5. To turn off the fan completely, set all
the buttons to “STANDBY” mode and un
plug the plug.
Instructions for using the remote
control
1
of the remote control.
2. The remote control, controls all
the functions of the base part for
easy performance. Follow the basic
instructions for remote control of the
fan.
Note: Do not use the old battery with
the new battery.
3. Please remove the batteries when
you are not use the fan for a long time.
Setup the fan
ON/SPEED switch
The wind speed will be change from 1 to
6, for this you can press SPEED button
repeatedly, the speed will be change. in
speed of 6 if you press SPEED button
one more time, it will turn back to speed
1 again.
2. OFF switch
Press the OFF switch to turn the de
vice off.
3. Oscillating
Press the OSC button and the head
starts to rotate, then press it again, the
fan will stop rotating.
4. TIMER switch
The fan can work at 30mins, 60mins,
120mins and 240mins by setting the
timer.
Remarks: The function of Item 2,3,4,5
are also can be realized by remote
control.
Manual setting of wind direction
The angle of the fan head is adjustable,
it can facing upwards and downwards
by slightly lift or press the cover.
Troubleshooting
When starting the fan, the fan blade
doesn›t work, please check whether
the power plug has really inserted into
the socket or the cover has distorted,
which has touched the fan blade. If
sound the noise when starting the fan,
please check the unit as following:
1. Fan blade has been tight installed into
the output shaft of motor.
2.Groove on back of cover has matched
the inserting groove on the output shaft.
3. There are tiny defective edge ring
existing around the fan blade.
4. The cover has distorted, which has
touched the fan blade.
Cleaning and maintenance
For safe care of the device, please
keep in mind the following safety tips:
1. Always unplug the appliance before
cleaning it and wait for it to stop com
pletely.
2. Before removing the guard, make
sure that the power supply to the fan
is cut off.
5
Assembly Instructions
tached. You must attach the grills before
operating the fan.
Warning: Never operate the fan without its
foundation and other parts. The fan must
any other position will be hazardous.
Do operate the fan only in upright position;
any other position could create a hazard
ous situation.
Assemble the foundation and other parts
of the appliance in the following sequence:
1.
.
2. Loosen the retaining screw to Lifting
Lifting
bar
ing screw.
3. Place the Control box clamping nut
4.
5.
clockwise direction until it is com
pletely tight.
6.
7.
counterclockwise until it is fully se
cured.
8.
9.
placed on both the front and back
Using the device
1. Before using the device, make sure that
it is on a flat and stable surface. If the de
vice is placed on a sloping surface dam
age is possible.
2. Set all buttons to “OFF” and then plug
directly into the standard AC outlet. Make
sure the plug is completely inserted into
the socket.
3. Press the “ON” button on the controller
to start the device. To select the speed,
To select the operating mode of the fan,
1 Front net 12 Control box
clamping nut
2 Lace ring 13 Lifting bar
clamping nut
3Fan plate
clamping nut 14 base
4 Fan plate 15 Control panel
5Back nut
clamp 16 Touch button
6 Back net Lifting bar
Motor body 18 Static bar
8Motor body
shaft Heavy base
head 20 Press plate
10 Long handle
connector 21 Limber bolt
11 Control box 22 Ring fan bolt
NS-1116
Stand Fan
4
Structure and Parts
articles as they may cause distortion of
fan body and cause electrical hazards.
21. Do not pull out the power supply plug
by pulling power supply cord, which may
lead to electrical shock or generating
electrical shock.
22. Keep away from curtain, closing or oth
er something may affect the fan’s working.
23. Turn off all switches and pull out power
supply plug when you go out for a long time.
24. Never use the fan before finishing as
sembly to avoid any hurts.
25. Before sending for maintaining the
certified NASA Electric after sales service
centers, if the unit doesn’t work, please
check the plug of power supply has been
inserted into socket with electricity.
26. Cleaning and user maintenance shall
not be made by children with supervision.
27. Ensure that the fan is switch off from
the supply mains before removing the
guard.
1
2
22
3
4
6
5
15
8
16
10
12
13
18
20
21
11
14
3
Safety warnings
Read these instructions for use carefully
and keep it well.
Warning: To reduce the risk of fire, elec
trical shock, and injury to person, the fol
lowing must be adhered to:
1. Before Plug in the socket make sure the
voltage of home socket is match with this
product.
2. This appliance is not intended for use by
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the ap
pliance by a person responsible for their
safety.
3. This appliance is intended for home use
and the following:
are available.
4. Children should be supervised to en
sure that they do not play with the appli
ance.
5. Connect the appliance to a sin
on the rating plate.
6.
it is in use. Always turn the fan to the
“OFF” position, and unplug the fan from
the electrical outlet socket, when not in
use.
7. Extreme caution is necessary when any
fan is used by or near children, invalids or
elderly persons, and whenever the fan is
8. Never use the device in the neighbor
hood of firebug or explosive materials.
9 . Do not use a fan without a stand. This
fan should only be used standing and up
right.
10. The fan cord must not be placed un
der carpets, or covered with throw rugs,
runners or similar. Arrange the cord away
from the traffic area, and where it will not
be tripped over.
11. Do not operate the fan with a damaged
cord or plug, or after the fan malfunctions,
or has been dropped, or damaged in any
manner.
12. If the supply cord is damaged, it must
be repaired by the certified NASA Elec
tric after sales service centers in order to
avoid a hazard.
13. Use the fan in a well ventilated area.
While in use, ensure that the air takes or
pectedly, and the fan distance from the
wall or corner must be no less than 20cm.
14. The fan should not be placed below or
besides any curtains or similar.
15.To avoid mechanical danger when in
use, do not insert, or allow fingers, or any
other objects into the grill. Do not block
any manner.
16. If you notice unusual oscillating mo
tion, stop using the fan immediately and
17. The fan must only be placed, and used
on a flat dry floor.
18. Avoid placing the fan next to the win
dow. Rainfall can lead to the risk of elec
tric shock.
19. Make sure to keep the fan far away
from humidity, chemical articles and oils.
20. While cleaning, be sure to not splash wa
ter and do not use oil, alcohol or chem ical
Table of Contents Pages
Safety warnings ..................................................................................................... 03
StructureandParts ................................................................................................ 04
Assembly Instructions ............................................................................................ 05
Using the device.................................................................................................. 05
Setup the fan.......................................................................................................... 06
Troubleshoting ..................................................................................................... 06
Cleaning and maintenance ................................................................................. 06
NS-1116
Stand Fan
Thank you for choosing our product. This instructions manual has
been prepared for you to achieve complete satisfaction and maximum
performance from your product read these instructions carefully before
using the appliance and keep the manual for future reference.
NASA electric Stand Fan NS-1116 User manual
Table of contents
Languages:
Other NASA electric Fan manuals
Popular Fan manuals by other brands
PROAIRA
PROAIRA SP9-18AW manual
Greenheck
Greenheck ODFD Series Installation, operation and maintenance manual
Domus Ventilation
Domus Ventilation DX Series Installation and Maintenance
Goldair
Goldair GTF124 operating instructions
Flex-a-Lite
Flex-a-Lite LoBoy 118 Puller installation instructions
Relaxxnow
Relaxxnow VTX400 user manual
Domus
Domus HRX-aQ AQH200-B installation instructions
aireRyder
aireRyder Zephyr Instructions for installation and use
Kichler Lighting
Kichler Lighting 52" Chiara LED instruction manual
NuTone
NuTone ROOMSIDE Series manual
Elumen8
Elumen8 Windstorm DMX Fan user manual
VENCO
VENCO VJC-200 Installation, operation and maintenance manual