naturebytes Wildife Cam Kit User manual
CK
The guide
This guide will take you through the assembly process
and give you all the information you need to know to get
started with your naturebytes wildlife cam Kit.
Use the images and read the description carefully to
help you through each step.
A. 'Standard' when using a powerbank, simpler option
B. 'maker' option when using alternative power sources,
slightly more complicated
This kit contains small parts. DO NOT allow
children under 5 years near this product.
anyone can
build to take stealthy high definition images
Attention! This symbol is used to show you
important information throughout the guide.
Appearance of parts, such as the insert may vary. During
assembly you will be given the following options:
Contents
1. Check List
2. The PIR Sensor
3. Controlling the power
4. The Camera
5. The Raspberry Pi and Real Time Clock
6. The Power supply
7. The Case
8. Attaching insert and powerbank
9. SD card and flashdrive
10. Power-up and test
11.Tips for great wildlife images
12. Additional Features
3
Electronics and additonal parts
Cam Case Parts
'standard' option - go to page 12 'The Camera'd
or
'maker option go to page 11 'The LiPo Rider'
AA
B
Insert assembly
Use
Insert assembly
Usee
http://naturebytes.org/wildlife-cam-kit-resources/
Th
'standard' option, go to page 18
or
'maker option' go to next page7
https://youtu.be/VzYGDq0D1mw
I)
II)
III)
Task 10 - Connect the Raspberry Pi
to the insert assembly
Attach the Raspberry Pi to the back of
the insert using the three screws and
spacers. Use the nuts to secure the
screw from the front (see ii)
See next page for attachment points for
different Pi models
I
Insert Assembly (back)
Pi A+
Insert
Back of Pi A+
(no logo or pins)
Back of Pi A+
(no logo or pins)
Back of Pi A+
(no logo or pins)
Other manuals for Wildife Cam Kit
1
Table of contents
