NCE NCE2DBT User manual

60W
x4
HIGH POWER
PLAYER - RECEIVER & BLUETOOTH
6.2’’TOUCH SCREEN DVD / MULTIMEDIA
Instruction Manual
NCE2DBT
Bluetooth

1
Safety Precautions
Please don't change the fuse on the
power cord without professional guidance,
using improper fuse may cause damage
to this unit or even cause re.
Please contact your nearest dealer if one
of the following symptoms is experienced:
(a). Water or other objects enters the unit.
(b). There is smoke.
(c). Peculiar smell.
To ensure safe driving, please adjust the
volume to a safe and comfortable level in
case of emergency situations.
Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to
operate your model properly. After youve
finished reading the instructions, keep
this manual in a safe place for future
reference.
Only connect the unit to a 12-volt power
supply with negative grounding.
Never install this unit where the operation
& condition for safe driving is impaired.
Never use the video display function
in the front when driving to prevent the
violation of laws & regulations and also to
reduce the risk of trafc accident except
for using rear view video camera.
Never expose this unit, amplifier, and
speakers to moisture or water to prevent
electric sparks or re.

2
Safety Precautions
1. Never disassemble or adjust the unit without any professional guidance.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning
may result in scratching or decoloration to the monitor.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this
manual. If no relevant information is found, please press the [RESET] key on the front panel to
resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in low temperature environment may result in moisture inside the unit, DO
NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit
still doesn't work after a few hours, please contact the service center.
6. Do not impact the LCD monitor which could cause damage.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. To provide a clear demonstration and an alternative for easy understanding to the operation of
this unit, graphic illustrations are used.
However, some illustrations are different from the actual images displayed on the screen.
9. Operate the unit correctly according to this manual to prevent unnecessary problem. The
guarantee won't be valid if the problem is caused by inappropriate operation.
Expanding Systems
Note:
The items listed outside of the frame are the commercial products generally sold.
MENU

3
Contents
Safety Precautions...................................1
Before Using.............................................4
Front Panel.............................................4
Remote Control.......................................5
Notes on Remote Control Usage............6
Basic Operations......................................7
Parking Brake Inhibit...............................7
Mute........................................................7
Power On / Off........................................7
.....................7
Playing Source Selection........................7
Volume Adjustment.................................7
EQ Menu.................................................7
Select Preset Equalizer ..........................8
Adjust EQ Parameters............................8
Adjust FAD BAL.....................................8
Set Date /Time........................................9
Set Date..................................................9
Set Clock Mode ......................................9
Set Time .................................................9
Radio Mode.............................................10
Tuner TFT Display................................10
Select Radio as Playing Source ...........10
Select One Radio Band........................10
Tune......................................................10
Preset Station.......................................11
Local Seeking.......................................11
EQ Selection.........................................11
Playback Mode........................................12
Load a Disc...........................................12
Eject a Disc...........................................12
Touch Screen Controls.........................12
Controlling Playback.............................12
Connect USB Device............................12
Remove USB Device............................12
Insert SD Card......................................12
Remove SD Card..................................12
Play/Pause............................................12
Previous/Next .......................................13
Search for a Folder...............................13
Repeat..................................................13
Repeat A-B...........................................14
..........................14
Select Audio Mode................................14
Select Subtitle Language......................14
Change View Angle..............................14
Video Setup..........................................15
Playback Information............................15
Direct Track Entry.................................15
Rotate Pictures.....................................15
Zoom.....................................................15
Bluetooth Mode ......................................16
Pair the Bluetooth-enabled Devices.....16
Disconnect Bluetooth Device................16
Make a Call...........................................16
Receive a Call.......................................17
Adjust Bluetooth Settings......................17
Music Mode ..........................................17
Settings ...................................................18
Display System.....................................18
Adjust General Settings........................18
Calibration.............................................18
Adjust Video Settings............................18
Adjust sound settings............................19
Adjust Time Settings.............................19
Adjust Language Settings.....................19
Adjust Bluetooth Settings......................19
Adjust DVD Rating................................20
Adjust Volume Settings.........................20
Other Modes............................................21
Listen to Other Devices ........................21
Reset ....................................................21
Replace a Fuse.....................................21
Steering Wheel Control Programming..21
.........................................22
Troubleshooting.....................................24
Installation...............................................25
Wire Connections...................................26

4
Front Panel
Before Using
1. [ ] Button
Press to eject a disc.
2. Remote Sensor
3. tolscsiD
4. Reset Hole
kcollatnerapdnadrowssaptpecxe(t luafedyrotcafotsgni t tesmetsysteserotsserP
settings).
5. [VOL / / MUTE / ] Knob
Rotate to adjust the volume.
P ress momentarily to activate the MUTE function. Press again to resume normal
listening.
Press to turn the unit ON. Press and hold to turn the unit OFF.
6. [ ] Button .neercsfossenthgi rbehttsujdA7.MENU Button
. t i nueh to tde i l ppasec ruosoed i v / o i duae l ba l i avaeh tneewt ebhc t iwso tsse rP
8. SD Interface Connector
9. Mini USB Connector
10. A/V Input
nacsec i vedoed i v / o i duasuo i r avmo r fs l ang i shc i hwhguo r h tkca jmm5 . 3as t peccA
be applied to the unit.
Notice:
The graphic in this manual is for reference only, and may be
different from the actual unit. Reference to actual unit is suggested.
1 3
11
4
5
7
6
8
10
9
2
11. MIC . ee r f sdnahh t oo t eu l br o fenohpo r c imn i t l i uB
MENU

5
Before Using
Remote Control
1. Return to the home menu
2. Eject the disc
3. Access to tuner source
4. Access to disc source
5. - Search an available radio station by
decreasing tuning frequency
- Select the previous chapter/track for
playback
6. Select radio band
7. - Zoom in (Picture menu of CD/USB/SD)
- Access to music list (Auido menu of
music playing)
8. Adjust screen settings
9. Open EQ menu
10. Menu cursor
11. Enter
12. - Open route menu (DVD)
- Turns on/off PBC (VCD)
13. Digit area
14. Repeat playback
15. Change to next source
16. Power on/off
17. Access to Bluetooth source
18. Access to navigation source
19. Pause playback/Start playback
20. - Search an available radio station by
increasing tuning frequency
- Select the next chapter/track for
playback
21. - Playback disc in different angle for a
scene (DVD)
- Rotate (photo playing)
- Access to video list
22. - Language selection for subtitle (DVD)
- Access to photo list
23. Change the audio language for disc
playback (DVD)
24. Increase/Decrease volume
25. Access to settings source
26. Mute On/Off Audio Output
27. Activate direct access mode
28. Dial/Receive a call
29. Hang up
30. Play all chapter/tracks in random order
31. - Press to clear the number one by one
- Hold to clear all the numbers

6
Notes on Remote Control Usage
1. Aim the remote control at the remote sensor on the unit.
2. Replace the battery from the remote control or insert a battery insulator if the battery has not
been used for a month or longer.
3. DO NOT store the remote control in direct sunlight or in high temperature environment, or it
may not function properly.
4. The battery can work for 6 months under normal condition. If the remote control wont work,
please change the battery.
5. Use“button shaped” lithium battery“CR2025”(3V) only.
6. DO NOT recharge, disassemble, heat or expose the battery in re.
7. Insert the battery in proper direction according to the ( + ) and ( - ) poles.
8. Store the battery in a place where children cannot reach to avoid the risk of accident.
Uninstall Battery
Slide out the battery compartment tray
at the bottom on the back of the remote
control.
Install Battery
Use button-shaped lithium battery
CR2025 (3V)” only. Insert the battery
to the battery tray with proper direction
according to the (+) and (-) poles.
Before Using
PULL OUTPUSH IN

7
Parking Brake Inhibit
•When the “BRAKE” cable is connected to the brake switch, the display on the TFT monitor will
display video only when the vehicle is applied.
•is set to REVERSE.
•When the parkinbrake inhibit is active, theront monitor displays “Warnin!!! It is illl to view
video while  or  a motor vehicle. Set  brake to view video.”, 

Mute
ress [VOL / /MUTE ] knob to e the e m the . ress n to restore the

Power On / Off
 the knob on the  to  the  on. The  on the   the
in the LCD.
 


Playing Source Selection
ress the MENU btton on the ront panel to display the playin

1. or : Tch to view the  or next  o

2. 
3. Clock
4. 
Volume Adjustment
To increase or decrease the vole level, tn the [ VOL / /
MUTE ] knob on the ront panel. The vole e is rom “0”
to “50”. The LCD or TFT screen displays the vole level or 3
seconds.
EQ Menu
The Aio Control eate allows yoto easily adst yr io
sysical characteristics y vehicle, which
vary dependinon the type ovehicle and its measnts.
   the Fader and Balance boosts the   the

1 12 3 4
Basic Operations
[VOL / /MUTE ]
[VOL / /MUTE ]

8
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ]
/ [ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters
adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
feature will selectively boost certain bass and
treble frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [ ] to adjust subwoofer volume from
-12 to +12.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value
from -12 to +12.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The parameters of the EQ modes has been preset and you can
not change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust
the frequency value under the modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be
adjusted separately.
Basic Operations

9
Basic Operations
Set Date /Time
1. Touch [ ] on the playing source menu.
2. Touch [ Time ].
The date/time setup menu is displayed.
Set Date
1. Touch [ Date ].
2. Touch the date information on the screen.
A submenu is displayed.
3. Touch [ ] or [ ] to set year, month and day.
Set Clock Mode
1. Touch [Clock mode].
2. Touch [12Hr] or [24Hr] to switch clock mode.
Set Time
1. Touch [ Time ].
2. Touch the time on the screen, a submenu is displayed.
3. Touch [ ] or [ ] to set hour and minute.
Tip:
When date/time is set, touch [ Save ] to conrm or [ Cancel ] to exit.

10
Select Radio as Playing Source
Open the Source Menu and then touch [Radio].
Select One Radio Band
Touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1
and AM2.
Tune
Auto Tuning
Press and hold [ ] / [ ] icon on the user interface more than 1 second to seek a higher / lower
station.
To stop searching, repeat the operation above or press other keys having radio functions.
Note:
When a station is received, searching stops and the station is played.
Manual Tuning
Method 1:
During manual tuning, the freuency will be changed in steps.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Method 2:
1. Touch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch numbers to input
freuency.
2. Touch [ ] to delete the input numbers step by step.
3. Touch [ OK ] to enter.
Radio Mode
123
4
5
67 89
10
11
12
1. Touch to view the SOURCE MENU and select a
new playback source
2. Strong ocal signal broadcasting indicator
3. Current radio band indicator
4. Broadcaster information stored at the preset
5. Touch to view more on-screen buttons
6. Touch to seek backward
7. Search stations automatically
8. Touch to seek forward
9. Touch to change between AM/FM bands
10. Clock
11. Current preset radio station
12. Current radio information
13. Save the desired radio station
14. Touch to change between ocal and Distance
15. Enter frequency directly
16. Touch for uick access to Eualizer level settings
Tuner TFT Display
14 15 1613

11
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and
each band can store 6 stations; hence the unit can store 30
stations in total.
Search Stations Automatically
Touch [ ] to search station and store 6 strongest stations in
current band automatically.
Manual Store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save the select band.
Tune to a Preset Station
1. Touch [Radio].
2. Select a band (if needed).
3. Touch one of the preset channels (P1 to P6) on the screen.
Local Seeking
Touch the [ ] icon and choose the Radio ocal or Distance.
When the [ ] icon turns bright, only stations with a strong
signal strength will be detected . Default is “Distance”.
EQ Selection
Press the [ ] icon and enter the E setup.

12
Load a Disc
You can play video, audio or images stored on the following discs:
•DVD Video, DVD-R, DVD-RW
•VCD
•Audio CD, CD-R, CD-RW
Note:
Ensure that the disc contains playable content.
Eject a Disc
Press the [ ] key on the front panel to eject the disc. When the
disc is ejected, the unit switches to the previous source.
Touch Screen Controls
The touch key areas for DVD playback are outlined below:
A: Return to the main menu
B: Play the video and display playback information
C: Display onscreen control menu
D: Time display
Controlling Playback
To access the on-screen controls, touch the screen except upper
left corner, and touch again to cancel display. Touch [ ] to
view all function icons.
Connect USB Device
1. Open the USB door.
2. Connect an USB device into the USB connector.
Play starts automatically.
Remove USB Device
1. Select other source on the main menu.
2. Remove the USB device.
Insert SD Card
1. Open SD card cover.
2. Insert the SD card into the SD card slot.
Play starts automatically.
Remove SD Card
1. Select other source on the main menu.
2. Press the card until you hear a click sound.
3. Remove the SD card.
Play/Pause
1. Once a disc, USB or SD card is inserted, play starts
automatically.
P layback Mode
A B
C
D

13
For DVD movie, if a menu appears, press [ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous / next track / chapter, press [ ] / [ ] key.
Previous/Next
Touch [ ] / [ ] key on the screen to skip to previous / next
track / chapter.
Search for a Folder
For Audio Files
1. Touch [ ] to display all available audio folders.
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Video Files
1. Touch [ ] to display all available video folders.
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Picture Files
1. Touch [ ] to display all available picture folders
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Folder Control
1. Touch [ ] to display all available folders
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
Repeat
For DVD/VCD movie disc:
1. Touch bottom half of the screen to display menu on the screen,
if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select:
DVD
[ ] Repeat chapter: Play the current chapter repeatedly.
[ ] Repeat title: Play all chapters in the title repeatedly.
[ ] Repeat all: Play all in the disc repeatedly.
[ ] Repeat off: Cancel repeat play.
VCD
[ 1 ] Repeat single: Play the current single repeatedly.
[ ] Repeat all: Play all in the disc repeatedly.
[ ] Repeat off: cancel repeat play.
Playback Mode

14
For CD/MP3 les:
1. Touch anywhere except the upper left corner to display menu on the screen, if necessary.
2. Touch [ ] repeatedly:
[ 1 ] Repeat single: Play the current single repeatedly.
[ ] Repeat all: Play all in the disc or storage repeatedly.
[ ] Repeat off: Cancel repeat play.
Repeat A-B
You can repeat a specic of video le (repeat A-B).
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu, if necessary.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to repeat.
Repeat A-B: the end of the section to repeat.
The selected section plays repeatedly.
4. To exit A-B repeat mode, touch A-B repeatedly, [Repeat A-B off] is displayed.
Shufe (Random) Play
You can play audio tracks/les in random order.
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu, if necessary.
3. Touch [ ] on the screen repeatedly to turn random play on or off.
Select Audio Mode
When you play VCDs, you can select an audio mode (R//Stereo).
1. During play, touch bottom half of the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
Touch [ ] repeatedly until the audio mode is selected.
Select Subtitle Language
For DVD discs that contain two or more subtitle languages.
1. During play, touch the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select a language.
The selected language is displayed.
Change View Angle
Some DVDs contain alternate scenes,such as scenes recorded from different camera angles.
For such DVDs, you can select from the available alternate scenes.
1. During play, touch of the screen to display menu on the screen, if necessary.
2. Press [ Angle ] repeatedly on the remote control.
The view angle is changed.
Playback Mode

15
Video Setup
Touch [ ] to access video setup mode, touch [ ] or [ ]
to set the desired effect.
You may set the brightness, contrast, saturation, and hue of the
video output from 1 to 20.
Playback Information
Touch the screen when playing back DVD and VCD discs and the
playback information will be displayed on the top area of the TFT.
For DVD
1. Disc type.
2. DVD Title information. “01/08” indicates that this DVD has 8
titles and the title playing back now is the first title.
3. DVD Chapter information. “005/012” indicates that current title
has 12 chapters and the chapter playing back now is the fifth
chapter.
For VCD
1. Disc type.
2. VCD Track information. “01/08” indicates that this VCD has 8
tracks and the track playing back now is the first title.
Elapsed Time
1. Elapsed time of the current track.
2. Total time of the current track.
Direct Track Entry
To select a track directly, touch the [ ] icon on screen control to
displaythe direct entry menu. Enter the desired track using the on-
screen number pad. Press [ OK ] to the selected track.
Rotate Pictures
1. When you view pictures, touch the screen to display menu on
the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to rotate the picture.
Zoom
You can zoom in pictures for a close view.
1. When you view pictures, touch the screen to display menu on
the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to zoom in the picture.
Playback Mode
12 3
DVD T:01/08 C:005/012
12
VCD Track:01/08
12
00:01:20 00:30:17

16
You can make or receive phone calls with Bluetooth-enabled phones
through the unit. You can also listen to music from a Bluetooth-
enabled device.
Pair the Bluetooth-enabled Devices
To connect your Bluetooth device to the unit, you need to pair the
device to the unit. Pairing needs only to be done once. You can pair
up to five devices. You also can search for Bluetooth devices by
mobile phone.
1. Turn on the Bluetooth function on the device.
2. Touch [ ] to search for Bluetooth device with the unit.
3. Select the Bluetooth device ID “NCE2DBT” in the pairing list.
4. Enter default password “0000”.
Tip:
•s iec i vedh t oo t eu l Badnat i nus i h tneewt ebegna r l ano i t ar epoehT approximately 5 metres .
•B efore you connect a Bluetooth device to this unit, familiarize
yourself with the Bluetooth capabilities of the device.
•Compatibility with all Bluetooth device is not guaranteed.
•Any obstacle between this unit and a Bluetooth device can
reduce the operational range.
•K eep this unit away from any other electronic device that may
cause interference.
Disconnect Bluetooth Device
To disconnect one device, touch [ ] .
Tip
•ideboslal l iwecivedehT sconnected when the device is moved
beyond the operational range.
•
•
eh tn i h t iwt ieca l p, t i nueh to tec i vedeh t t cennoce ro t t nawuoyf I operational range.
fI you do not want to reconnect the device to the unit automatically,
[ hcuo t
For details, see the “Adjust Bluetooth Settings” section.
Make a Call
1. Select Bluetooth function in the home menu.
2. Pair the phone with the unit.
3. Search for phone number from the following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch [ ] to dial.
Bluetooth Mode

17
Receive a Call
By default, all incoming calls are received automatically.
1. If there is an incoming call, “Incoming” will appear on the screen .
2. You may touch the screen to select [ Hang up ] or [ Answer ].
Speak into the Bluetooth microphone.
Tip
•You can select to receive calls manually by setting [Auto answer]
to [Off] status.
Adjust Bluetooth Settings
1. In Bluetooth menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
· [Bluetooth]: To turn on or off “Bluetooth” function.
· [Auto connect]: To turn on or off “Auto connect” function.
· [Auto answer]: To turn on or off “Auto answer” function.
· [Pairing code]: To set pairing code.
· [Phone book sync]: To synchronize phone book, touch [ OK ] on
the sub-menu popped out.
Phonebook sync may take several minutes to load on initial setup.
Tip
•You can also adjust Bluetooth settings in the “Settings” menu.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution Prole . The mobile
phones supporting this function can transmit stereo audio, whereas
the ones not supporting this function can transmit mono audio only .
AVRCP
AVRCP is short for Audio/Video Remote Control Prole. The mobile
phones supporting this function can control the playback of a
Bluetooth audio player.
To make a call in music playing mode, press the number keys on
the mobile phone and the music player will stop. “Calling” will be
displayed on the TFT and once the call is received the caller audio
will be transferred to the unit. When the call ends, the screen will
display the music playing menu.
If there is an incoming phone call, the music player will stop and the
screen will display “Incoming”. When the call ends, the screen will
display the music playing menu.
Bluetooth Mode

18
Display System
1. Touch the upper left corner to display the main menu.
2. Touch [ Settings ].
The settings menu is displayed.
Adjust General Settings
1. Touch [ General ], if necessary.
2. Touch to highlight a setting.
3. Touch to display/select an option.
4. Touch blank area of the screen to exit.
General settings Options Description
Radio region USA/China/Japan/Europe/Europe
(LW)/OIRT Select one that matches your location.
Radio range Local Select Local to receive only stations with extremely
strong signal.
Distance
Blackout Off/10s/20s Set the screensaver
Dimmer mode Night/Dark/Normal/Bright Adjust the display brightness.
Beep On Turn on the beep sound. Each time you press a button,
the unit beeps.
Off Turn off the beep sound.
Calibration Start Calibrate the touch screen.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen using the calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will
move automatically.
4. Aim at center of [ + ], follow the path as shown in the gure.
Once steps 1-5 are complete the system will automatically exit
calibrating mode.
Adjust Video Settings
1. Touch [Video].
2. Touch an option repeatedly to select.
Video settings Options Description
Parking On Disable video when driving.
Off Enable video when driving.
When in Park “On” mode, the screen will display WARNING information if you play the video. The
warning screen will prevent the driver from watching videos for safety.
Settings

19
Adjust sound settings
1. Touch [Sound].
2. Touch an option repeatedly to select:
3. Touch blank area of the screen to exit.
Sound settings Options Description
Subwoofer On Turn on the subwoofer.
Off Turn off the subwoofer
Subwoofer lter
80Hz
Select subwoofer lter criteria.120Hz
160Hz
Adjust Time Settings
1. Touch [ Time ].
2. Touch an option repeatedly to select:
3. Touch blank area of the screen to exit.
Sound settings Options Description
Date Y/M/D Touch [ ] or [ ] to set year, month and day.
Clock 12Hr/24Hr Touch [12Hr] or [24Hr] to switch clock mode.
Time H/S/AM/
PM Touch [ ] or [ ] to set hour and minute.
Touch [ ] or [ ] to set AM/PM (only for 12Hr).
Adjust Language Settings
1. Touch [anguage].
2. Touch an option repeatedly to select.
3. Touch blank area of the screen to exit.
Language settings Description
OSD Select on-screen display language.
DVD audio Select DVD audio language. Options available depend on DVD disc.
DVD subtitle Select DVD subtitle language. Options available depend on DVD disc.
Disc menu Select DVD menu language. Options available depend on DVD disc.
Adjust Bluetooth Settings
1. Touch [Bluetooth].
2. Touch an option repeatedly to select.
3. Touch blank area of the screen to exit.
Bluetooth settings Options Description
Bluetooth On Turn on the Bluetooth function.
Off Turn off the Bluetooth function.
Auto connect On If the pre-paired device is within the effective range, the unit re-connects
to pre-paired device automatically.
Off Need to re-connect manually.
Auto answer On Answer paired phone call automatically.
Off Answer phone call manually.
Pairing code Set the password for pairing the unit with other Bluetooth device.
Settings