NEC V421-2-R User manual

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 1 of 11
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation Page 1
Ventilation Requirements Page 2
Display Dimensions
Front, Top & Right Side Page 3
Rear & Bottom Page 4
Display Dimensions w/Optional Speakers and Stand Page 5
Table Top Stand Dimensions Page 6
Optional Speaker Dimensions Page 7
Optional Wall Mount Dimensions (WMK-3260L) Page 8
Optional Wall Mount Dimensions (WMK-3257) Page 9
Input Panels Page 10
Control Codes Page 11
Product Description
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 1080 Dimensions without stand: 40.3”(W) x 26.2”(H) x 5.2”(D)
Aspect Ratio: 16:9 Dimensions with stand: 40.3”(W) x 25.6”(H) x 13.0”(D)
FCC: Class B Weight without stand: 45.2 lbs
Power Consumption: 160W (max) Weight with stand: 49.2 lbs
BTU’s: 545.94 BTU/hour
NOTES:
•This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
•Distances are in inches, for millimeters multiply by 25.4.
•Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 2 of 11
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
NOTE:
•The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 3 of 11
Display dimensions

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 4 of 11
Display dimensions (cont.)

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 5 of 11
Dimensions with optional speakers and stand

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 6 of 11
Table Top tand Dimensions ( T-4020)

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 7 of 11
Optional peaker Dimensions ( P-P4046)

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 8 of 11
Dimensions with optional Wall Mount Kit (WMK3260-L)

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 9 of 11
Dimensions with optional Wall Mount Kit (WMK3257)

NEC Display Solutions of America, Inc.
V421 Installation Guide
42” LCD Display Rev 1.1
www.necdisplay.com V461 Page 10 of 11
Input Panel
Bottom:
Detail: