NEC XG85-XG135LC - 1 User manual

1
MultiSync XG85
MultiSync XG135LC
Large Screen MultiSync Projection Monitor
Set-Up Manual
Model Number:
XG-852/XG-1352
XG-852G/XG-1352G

2

3
123456
12345
6
12345
6
12345
6
12345
6
12345
6
123456
CONTENTS.SETTING .................................................................. 68
Displaying the Various Setting Features ....................................68
Projection Type Selection..........................................................69
Connecting to the Switcher .......................................................71
Default Input Selection ..............................................................73
Focus Edge Mode......................................................................76
S-Video Mode Selection ............................................................78
Video Mode Selection................................................................80
Auto Power ON Mode Setting....................................................82
Warm-Up Mode Setting ............................................................84
Automatic Save Feature.............................................................86
Phosphor Saver Setting ............................................................88
Signal Switching Mute Mode Setting ........................................90
Direct Entry Access Setting .......................................................92
Blue Focus Tracking Setting......................................................94
Optional Terminal Baud Rate Selection .....................................95
RGB/COMPONENT Search Setting ............................................96
On-Screen Display Mode Setting...............................................98
On-Screen Display Color Setting .............................................100
Date, Time Display Setting ......................................................102
Entering Date and Time ...........................................................104
PJ Address Display Setting .....................................................106
"NEW SIGNAL" Message Display Setting .................................107
Auto Sequence Setting ............................................................108
Address Setting.......................................................................117
Projector Version Number.......................................................120
Checking and Setting the Running Time .................................121
Viewing Default Data ..............................................................122
REFERENCE ADJUSTMENT............................................ 123
REF. ADJUST menu.................................................................123
ASTIG Adjustment...................................................................124
Bright Uniformity Adjustment..................................................126
White Uniformity Adjustment ..................................................127
Raster Centering Adjustment ..................................................128
Appendix
TIMING CHARTS ........................................................ 130
Pre-set Signals........................................................................130
Input Signal Reference Chart...................................................131
Input Signal Timing .................................................................132
MESSAGE LIST .......................................................... 133
PART NAMES AND FUNCTIONS ......................................... 4
Front Terminal Panel ...................................................................4
Rear Control Panel ......................................................................4
Optional Boards...........................................................................6
Remote Control Unit....................................................................8
Battery installation and replacement ...................................11
Remote control cautions.....................................................11
Handling remote control and batteries ................................11
Set-Up (for service personnel)
BEFORE SET-UP ......................................................... 14
Displaying the Menu and Adjustment Screens ..........................14
Storing Projector Settings (Automatic Save Feature) ................15
On ADJUST MODE ....................................................................17
Test Pattern...............................................................................18
SIGNAL ENTRY............................................................19
Signal Entry Procedures ............................................................19
Checking and Setting Various Parameters ................................30
ADJUSTMENT .............................................................38
Set-Up Procedure......................................................................38
Electrical Focus Adjustment ......................................................39
Alignment Adjustment...............................................................43
Static Convergence Adjustment ................................................50
Dynamic Convergence Adjustment............................................51
Color Temperature and White Balance Adjustment ...................59
R, G, and B Gain Adjustment.....................................................60
PASSCODE................................................................ 61
Entering Passcode.....................................................................61
Registering Passcode................................................................62
Changing Your Passcode ..........................................................64
Canceling Your Passcode..........................................................66

4
PART NAMES AND FUNCTIONS
Front Terminal Panel
Rear Control Panel
ACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2
OUT IN
INPUT SELECT ENTERON/OFFINDICATOR
I
INPUT SELECT POWER
1 32
4 65 7
GFEDCB
89
0
I
H
123456
12345
6
12345
6
12345
6
12345
6
123456
PART NAMES AND FUNCTIONS.
A cover is provided to attach the rear control panel.
AJ

5
AACAT OUT Terminal
This is a video output connector for the optional built in
CCD camera. The CCD camera is needed in order to
perform automatic convergence with the optional ACAT
software.
B R/Cr, G/Y, B/Cb H/V and V Input Terminals (INPUT A)
Connect R,G,B,H (Horizontal sync) and V (Vertical sync)
outputs of the external equipment (such as the Switcher).
If using a component with a combined sync (SYNC)
output,connect it to the H/V terminal. When using
luminance and color-difference signals of HDTV and
DVD, connect a Pr/Cr to the R, a Y to the G and a Pb/Cb
to the B input of the projector.
CS-VIDEO Input Terminal (INPUT A)
Connect to the S-video output of the external equipment
such as a VCR with an S-video output.This terminal
allows switching between S2 and S1 VIDEO input modes.
DVIDEO Input Terminal (INPUT A)
Connect to the video output of the external equipment
such as a VCR or laser disk player.
EOPTION Terminal
For system expansion such as PC-control.
FREMOTE 1 Terminal
This terminal allows external control of the projector from
either the Switcher or from an external control.When the
Switcher is used,connect to the REMOTE 1 terminal on
the back of the Switcher.
NOTE: The ISS-6020/ISS-6020G Switcher is compatible
with this projector.
GREMOTE 2 Terminal
IN: for the supplied service remote control.
OUT: connect to a second projector’s IN terminal to relay
the input at the IN terminal.
NOTE: The wireless control does not work when the plug
of the supplied remote cable is inserted into the RE-
MOTE 2 IN terminal.
HINPUT B
Slot for adding optional RGB or video input cards.
IINPUT C
Slot for adding optional RGB or video input cards.
NOTE: The optional RGB INPUT and VIDEO INPUT
modules can be installed in the INPUT B and INPUT C
slots.
JActive Indicator (green LED)
Lights up when the INPUT A slot is selected.
Front Panel
1Power Switch (Main power)
To turn on the main power to the projector press the
switch to the ON position (I). The STANDBY and the RC
READY indicator will light.
In this condition you can start up the projector by pressing
the POWER ON button on the remote control or the
POWER button on the rear panel.
Press to the OFF position (0) to turn the main power off.
NOTE: When turning off the main power,first return the
projector to the standby condition by pressing the
POWER OFF button on the remote control or the POWER
button on the rear panel and thin turn off the main
POWER switch.These procedures are necessary to
protect your projector and the connected equipment.
2AC INPUT
Connect the supplied power cord here.
3Remote Sensor
Receives the signal from the supplied remote control
when used in the wireless condition.
Rear Panel
4Remote Sensor
Receives the signal from the supplied remote control
when used in the wireless condition.
5POWER Indicator
Lights up when the projector is turned on.
6STANDBY Indicator
Lights up when the projector’s main POWER swicth is on .
Flashes when the projector is not connected with the
Switcher correctly or when the Switcher is turned off.
7RC READY Indicator
Lights up when the projector's main POWER switch is on.
Flashes when the projector receives a signal from the
remate control.
8Two Digit Display
INDICATOR:
Displays projector error codes.(“00” in normal operation)
ON/OFF Switch:
Turns the INDICATOR on or off.
9INPUT SELECT Buttons
INPUT: press to display the INPUT SELECT screen.
SELECT: press to select an input by highlighting the
input terminal.
ENTER: press to execute selection and to switch input.
0POWER Button
Turns the projector on or off when the projector is in the
standby condition (Main Power switch must be on and the
STANDBY and the RC READY indicator lit).
PART NAMES AND FUNCTIONS

6
PART NAMES AND FUNCTIONS
OPTIONAL Boards
VIDEO INPUT Board [XG VIDIN (A)]
Front view
1Active Indicator (green LED)...... Lights up when this board is selected.
2VIDEO INPUT Terminal ............... Connects composite video output signals.
3S-VIDEO INPUT Terminal ........... Connects S-video output signals.
4VIDEO INPUT Terminal ............... Connect to the audio outputs of the external equipment such as a VCR.
(Not available on this model.)
5S-VIDEO INPUT Terminal ........... Connect to the S-video audio outputs of the external equipment such as a VCR
with S-video outputs. (Not available on this model.)
RGB INPUT Board [XG RGBIN (A)]
Front view
1Active Indicator (green LED)...... Lights up when this board is selected.
2R Input Terminal.......................... Connects an Red output signal.
3G Input Terminal ......................... Connects a Green output signal.
4B Input Terminal.......................... Connects a Blue output signal.
5H/HV Input Terminal.................... Connects horizontal sync or horizontal/vertical sync output signals.
6V Input Terminal.......................... Connects a vertical sync output signal.
7AUDIO Input Terminals............... Connect to the audio outputs of the external equipment such as ISS-6020/6020G.
(Not available on this model.)
RGB INPUT Board
Top view
8Rotary Switch (S1001)
9Jumper(S1002, S1003, S1004)
8
RGB INPUT R G B H/HV V
LR
AUDIO INPUT
1234567
9
S-VIDEO
VIDEO INPUT VIDEO
LRLR
S-VIDEOVIDEO
AUDIO INPUT
312 5
4

7
PART NAMES AND FUNCTIONS
The combination of the rotary switch and the jumper pins allows the projector to accept VIDEO or COMPONENT signals. Note that
this board cannot accept RGB signals when board is set to VIDEO input.
Rotary switch (S1001)
5
4
3
2
1
0
9
8
7
6
SLOT FOR OPTIONAL MODULE
ACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2
OUT IN
INPUT SELECT ENTERON/OFFINDICATOR
I
INPUT SELECT POWER
INPUT B slotINPUT C slot INPUT A slot
Corresponding slot number
You can also select the input signal directly by pressing the INPUT “1” through “10” button. In this case INPUT buttons function as
follows:
Input
VIDEO input
COMPONENT INPUT
RGB input
Not used
Mark
VIDEO
OPTION
RGB
No.
0
1
3
2, 4-9
Jumper (S1002, S1003, S1004)
VIDEO
432
RGB
Rotary Switch(S1001)
0
1
3
Jumpers
(2, 3) Short
(2, 3) Short
(1, 2) Short
R terminal
VIDEO
Pr/Cr
R
G terminal
Y
Y
G
B terminal
C
Pb/Cb
B
Board Identification
VIDEO
COMPONENT
RGB
Input Signal
Setting of Rotary switch and Jumpers
Table for Setting Rotary Switch and Jumpers.
Setting of Rotary switch
*
* indicates factory preset.
*1 Some settings allow you to retrieve a COMPONENT signal automatically. See “RGB/COMPONENT Search Setting”.
*2 When the optional RGB input board is installed and the RGB input is set, an RGB signal will be selected; when the RGB input
board is installed and the COMPONENT input is set, a COMPONENT signal will be selected; when the optional RGB input
board is installed and the VIDEO input is set, a VIDEO signal will be selected.
When the optional VIDEO input board is installed, a VIDEO signal will be selected.
*3 An S-VIDEO signal will be selected when :
1. the optional RGB input board is installed and the VIDEO input is set.
2. the optional VIDEO input board is installed.
1
2
3
4
5
6
7
8
9
10
INPUT A slot
RGB
VIDEO
S-VIDEO
COMPONENT
INPUT C slot
RGB/COMPONENT/VIDEO
S-VIDEO
INPUT B slot
RGB/COMPONENT/VIDEO
S-VIDEO
*1
*2
*3
*2
*3
* No.3 is factory preset.
*

8
1POWER Buttons (ON/OFF)
Press the ON button to turn the projector on when the
projector is in the standby condition (STANDBY and RC
READY indicators lit). Press the OFF button to return the
projector to the standby condition.
2TEST Button
Press to display the “TEST PATTERN” menu from which
you can select a test pattern.
PART NAMES AND FUNCTIONS
Remote control unit
User Remote Control
RC-6320
Full Function Remote Control
RC-6321
NOTE: The full function remote control is designed for setup
adjustment. Use the user remote control for normal
operation.
POWER
ON OFF
OPERATE
PICTURE
MUTE
SOUND
MUTE
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ /
10 ,.
R
B
ENDCTL
DISPLAY
STATIC
NORMAL ENTER
1 ABC 2 DEF 3 GHIOFFON
4 JKL 5 MNO 6 PQRTEST
7 STU 8 VWX 9 YZ/ ADJUST OPERATE
10 ,. SOUND FUNC PIC FUNC
HELP INFO INPUT LIST SOUND MUTE PIC MUTE
POSITION
KELVINFOCUS DISPLAY
RGBPOINTSTATIC
PHASETILT
BOW
AMPLIT
LINEAR
STORE
KEYSTN
CTL ENTER END NORMAL PINCUS
POWER INPUT
CURSOR
ON
OFF
1
K
R
U
VS
W
Q
B
0
9
8
4
X
K
L
NM
PO
Q
R
T
VU
W
1
23
45
67
89
0A
BC
DJ
E
F
G
H
I
S
CAPTION CAPTION
ADDRESS
Y
Z
Y

9
3ADJUST Button
Press to display the “ADJUST” menu.
4OPERATE Button
Press to display the “OPERATE” menu.
5Backlight Switch
Turns the backlight on and off.
If no button operation is made within 30 seconds with
the Backlight ON, the Backlight will turn off to
conserve battery life.
6PIC FUNC Button
Press to display the picture adjustment screen.
NOTE: Some function items will not be available
depending on the type of video signal.
7SOUND FUNC Button
Press to display the VOLUME adjustment screen. You
can adjust the volume of the ISS-6020/ISS-6020G
Switcher.
8PICTURE (PIC) MUTE Button
Press to mute the picture. Press again to display the
picture. You can also mute the picture by holding
down CTL and pressing PICTURE MUTE buttons. To
restore the picture, holding down CTL and press
PICTURE MUTE again. Or simply press END.
NOTE: When the picture is muted by using CTL and
PICTURE MUTE buttons, even if an input is
switched to another or the power is turned off using
the remote POWER OFF button, the mute cannot be
canceled.
9SOUND MUTE Button
Press to mute the sound. Press again to return the
sound.
NOTE: This works only with the ISS-6020/ISS-6020G
Switcher.
0DISPLAY Button
Press to turn on or off the on-screen display. Pressing
with CTL eliminates the on-screen display; pressing
with CTL will restore display.
PART NAMES AND FUNCTIONS
NOTE: Even if the on-screen display may be turned off
with pressing CTL and DISPLAY, any adjustment will
still change the projector’s memory settings. This mode
is available even when an input is switched to another or
the power is turned off using the POWER OFF button on
the remote control.
AFOCUS Button
Press to enter the FOCUS mode.Pressing with CTL will
bring you to the ASTIG adjustment screen.
BSTATIC Button
Press to enter the STATIC mode. You can adjust the static
convergence.
CPOINT Button
Press to enter the POINT mode. You can adjust the point
convergence.
DTILT Button
Press to enter the TILT, SKEW mode. You can adjust the
tilt and the skew of the projected image.
EBOW Button
Press to enter the BOW mode. You can adjust the hori-
zontal and the vertical bow of the projected image.
Pressing with CTL will bring you to the LINE DISTOR-
TION adjustment screen.
FAMPLIT Button
Press to enter the AMPLITUDE mode. You can adjust the
horizontal width and the vertical height of the projected
image.
GLINEAR Button
Press to enter the LINEARITY mode. You can adjust the
horizontal and the vertical linearity of the projected image.
Pressing with CTL will bring you to the LINEARITY-
BALANCE adjustment screen.
HKEYSTN Button
Press to enter the KEYSTONE mode. You can adjust the
horizontal and the vertical keystone of the projected
image. Pressing with CTL button will bring you to the
KEY-BALANCE alignment screen.

10
IPINCUS Button
Press to enter the PINCUSHION mode. You can adjust
the horizontal and the vertical pincushion of the projected
image. Pressing with the CTL button will bring you to the
PIN-BALANCE alignment screen.
JPHASE Button
For service personnel only.
KINPUT Button
Selects menus and switches input signals.
LHELP Button
Press to display the explanation of the current selected
function and available functions.
MINPUT LIST Button
Press to display the memory list of the recorded input
signals.
NINFO Button
Press to display the various parameters and settings of the
currently displayed image. Pressing with the CTL button
displays some of items available in SETTING MODE.
OKELVIN Button
Press to enter the KELVIN mode. You can adjust the
color temperature and, the white and the black level.
PPOSITION Button
Press to enter the position mode. You can adjust the
horizontal, vertical position and horizontal, vertical
blanking and image size.
QR, G, and B Buttons
Turn each CRT beam on and off separately. When using
with the CTL button, you can select the CRT to be
adjusted during convergence and focus adjustments. Note
that the G button is only on the full function remote
control.
RCURSOR Buttons
Used for increasing and decreasing control levels, cursor
movement and convergence adjustments.
SNORMAL Button
Returns the standard level for each signal. When pressed
once, the confirmation message will be displayed. When
“YES” is selected and ENTER is pressed, the data will be
returned to the standard level. While holding down the
CTL button, press the NORMAL button to display the
“LOAD/CANCEL” menu to select either LOAD (last
stored level) or CANCEL (data cancelled).
TSTORE Button
Memorizes the adjustments setting of each signal sepa-
rately.
When pressed once, the confirmation message “STORE?”
will be displayed. When selecting “YES” and ENTER, the
data will be stored in memory.
UEND Button
Ends the adjustment mode.
VENTER Button
Executes menu selection and switches to selected input.
WCTL Button
Used in conjunction with other buttons, similar to a shift
key on a computer.
XRemote Control Jack
Insert the plug of the supplied remote cable here when the
full function remote control is used in the wired condition.
YCAPTION Button
Press to display the CLOSED CAPTION menu.
ZADDRESS Button
Press to display the ADDRESS menu. Pressing with CTL
allows you to specify the address for the remote control.
PART NAMES AND FUNCTIONS

11
PART NAMES AND FUNCTIONS
Battery installation and replacement
User remote control (RC-6320)
1Press down on the battery compartment cover and slide
the cover in the direction of the arrow.
Full function remote control (RC-6321)
1Press down on the battery compartment cover and slide
the cover in the direction of the arrow.
NOTE: The remote control is powered by two alkaline 1.5V
AA batteries.
3Close the battery compartment cover.3Close the battery compartment cover.
2Install the two new batteries, making sure that their
polarity matches the ,.diagrams inside the battery
compartment. Incorrect polarity could damage the unit.
2Install the two new batteries, making sure that their
polarity matches the ,.diagrams inside the battery
compartment. Incorrect polarity could damage the unit.
Remote control cautions
Use the remote control within a distance of about 7m (23 ft.) and at 30 degrees angle left and right.
Handling remote control and batteries
• Do not drop or mishandle the remote.
• Do not get the remote wet. If the remote gets wet, wipe it dry immediately.
• Avoid heat and humidity.
• When not using the remote for a long period, remove the batteries.
• Do not use new and old batteries together, or use different types together.
• Do not take apart the batteries, heat them, or throw them into a fire.
• Avoid using the full function remote control as wireless with the backlight switch ON for an extended period of time. This can
cause short battery life.

12

13
Set-Up
The Signal Entry chapter explains how to register a new
input signal and how to set various parameters of the
currently selected signal.
The Adjustment chapter gives you the procedures for
various adjustment such as focus, alignment, conver-
gence. This chapter also explains the passcode. It is a
convenient way to prevent any tampering of projector
set-up information by unauthorized individuals.
The Setting chapter gives you details on setting for
various use.
CONTENTS
Before Set-Up ................................................14
Signal Entry....................................................19
Adjustment .....................................................38
Passcode .......................................................61
Setting............................................................68
Reference Adjustment .................................123
Set-Up (for service personnel)

14
123456
12345
6
12345
6
12345
6
12345
6
12345
6
123456
BEFORE SET-UP.
Displaying the Menu and Adjustment Screens
Access of all set-up functions is done through the menu system.
Depending upon button selection, your desired screen will be displayed as shown below:
ADJUST menu
NOTE: Some function items will not be used depending on the input video signal or connected peripheral equipment.
ADJUST
ADJUST menu
– ADJUST –
1 / SIGNAL ENTRY
2 / FOCUS
3 / ALIGNMENT
4 / CONVERGENCE
5 / KELVIN
6 / R,G,B GAIN
7 / PASSCODE
8 / OPTION
9 / REF. ADJUST
SIGNAL ENTRY screen
FOCUS menu
– FOCUS –
1 / CENTER
2 / EDGE ALL
3 / EDGE SEPA.
4 / CORNER
ALIGNMENT menu
– ALIGNMENT –
01 / TILT, SKEW
02 / BOW
03 / AMPLITUDE
04 / LINEARITY
05 / KEY-STONE
06 / PIN-CUSHION
07 / LINEAR-BAL.
08 / KEY-BALANCE
09 / PIN-BALANCE
10 / LINE DIST.
11 / R,G,B POINT

CONVERGENCE menu
– CONVERGENCE –
1 / TILT, SKEW
2 / BOW
3 / AMPLITUDE
4 / LINEARITY
5 / KEY-STONE
6 / PIN-CUSHION
7 / LINEAR-BAL
8 / LINE DIST.
9 / POINT
10/ PHASE

1 / COLOR TEMP.
2 / WHITE BAL.
Adjustment screen
PASSCODE menu
OPTION menu
– OPTION –
1 / SETTING MODE
2 / MENU MODE
3 / SEQUENCER
4 / PJ ADDRESS
5 / VERSION
6 / HOUR METER
7 / DEFAULT DATA
Adjustment screen
FOCUS
CTL G
Sub menu and
Adjustment screen
CTL R,B
TILT
BOW
AMPLIT
LINEAR
KEYSTN
PINCUS
CTL LINEAR
CTL KEYSTN
CTL PINCUS
TILT
BOW
AMPLIT
LINEAR
KEYSTN
PINCUS
PHASE
CTL LINEAR
NEW PASSCODE?
input screen
PASSCODE
DISABLE? menu
Sub menu
/ Setting screen
KELVIN
– REF. ADJUST –
1 / ASTIG
2 / BRIGHT UNIFORM.
3 / WHITE UNIFORM.
4 / RASTER CENTERING
CTL BOW
POINT
CTL BOW
POINT
– KELVIN –
Sub menu and
Adjustment screen
CTL ADJUST

15
BEFORE SET-UP
Storing Projector Settings (Automatic Save Feature)
You have two options to store projector settings in the memory:
automatically and manually.
STORE ?
CURRENT NEW CANCEL
• Storing time is four seconds.
• The Automatic Save Feature mode has been set to DISABLE by
factory. For information on setting, see “Automatic Save Feature”
on page 86.
mWhen the Automatic Save Feature mode is set to “ENABLE”,
projector settings will be stored in the projector’s memory
automatically.
Settings are stored automatically when any one of the following
procedures is performed:
• The END button is pressed several times to return the adjust-
ment screen to the source screen.
• One input is switched to another.
• The projector is turned off.
• After every 10 minutes of elapsed time.
mWhen the Automatic Save Feature mode is set to “DISABLE”,
projector settings can be stored in the projector’s memory
manually.
When you try to return the source screen by pressing END
several times, the “STORE ?” menu is displayed.
To manually save settings, proceed as follows:
1. Use the END button to display the “STORE” menu from the
current adjustment screen or menu.
2. Use the CURSOR or button to highlight “CURRENT”,
“NEW”, or “CANCEL” and press ENTER.
Items to select
• CURRENT ------Overwrites the currently projected signal and
saves the settings. NOTE: An unregistered signal
cannot be stored under the ''CURRENT''
settings.
• NEW ------------Starting at memory location No.51, this function
saves an unregistered signal as a new signal in
memory.
• CANCEL --------Does not save settings.

16
BEFORE SET-UP
mWhen selecting “NEW”
The current settings are registered as a new signal and are
saved to an unassigned line starting at memory location
No.51.
A registered name is automatically given.
The “NEW ENTRY?” menu will be displayed.
Use the CURSOR or button to highlight “YES” or
“NO” and press ENTER.
Items to select
• YES------------- Registers settings as a new signal and
saves the signal in an unassigned
location starting at memory location
No.51.
• NO -------------- Does not register settings.
A registered name is given as follows:
VIDEO/S-VIDEO----- Video standard with a list number
e.g. NTSC51 or PAL52.
RGB --------------------- ”RGB” with a list number e.g.
RGB60.
COMPONENT -------- ”COMPO” with a list number, e.
g. COMPO 70.
NOTE:
• If the Input list does not have any unassigned memory
location starting at No. 51 then, the “NEW” item will be
selectable. For signal registration see “SIGNAL ENTRY”
on page 19.
• The Automatic Save Feature is available only for signals
listed in the INPUT LIST.
NEW ENTRY?
LIST No. **
NAME ********
YES NO

17
On ADJUST MODE
The ADJUST mode contains various adjustment items for set-up.
Open the ADJUST menu and select the item you wish to adjust. To
display the ADJUST menu, proceed as follows:
1Press the ADJUST button.
• The projector may ask for your passcode.
2Enter your registered passcode.
When a passcode has not been registered:
• Since no passcode is programmed at the factory, pressing the
ADJUST button will open the ADJUST menu.
• See “Entering Passcode”, “Registering Passcode”, “Changing
Your Passcode” and “Canceling Your Passcode” on pages 61
through 66.
When your passcode has already been registered:
• When finishing the ADJUST mode, the “RETURN USER
MODE?” menu will be displayed. If you select “YES” and
press ENTER to end the ADJUST mode, you will have to
enter your passcode to re-enter the ADJUST mode.
• When finishing the ADJUST mode by either selecting “NO”
or pressing END, you do not need to enter your passcode to
re-enter the ADJUST mode. To exit the ADJUST mode
temporarily during adjusting, select “NO”.
PASSCODE?
****
BEFORE SET-UP

18
BEFORE SET-UP
Test Pattern
This projector will generate a selection of test signals.
Ten kinds of internal test patterns can be selected from the TEST
PATTERN menu.
To display the TEST PATTERN menu, proceed as follows:
1Press the TEST button on the Full function remote control.
• The “TEST PATTERN” menu will be displayed.
• When the END button is pressed, the “TEST PATTERN” menu
willdisappear.
2Use the CURSOR or button to highlight the test pattern you
wish to use and press ENTER.
• The selected test pattern will be displayed.
3To return to the source screen, press the TEST and then the END
button.
• When the TEST button is pressed, the “TEST PATTERN”
menu will be displayed and when the END button is pressed,
the screen will be changed to the source screen.
• The projector will return to the original source screen by
pressing the END button only whenno menu or no adjustment
screenisdisplayed.
NOTE: If there is no test pattern, the beams have been turned
off by the R, G, and B buttons on the remote control.
CROSS-HAIR CROSS-COARSE CROSS-FINE DOT-COARSE
DOT-FINE FOCUS WINDOW-WHITE
Adjustment test pattern
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H H
ALL WHITE
WINDOW-BLACK GRAY SCALE
– TEST PATTERN –
CROSS-HAIR
CROSS-COARSE
CROSS-FINE
DOT-COARSE
DOT-FINE
FOCUS
WINDOW-WHITE
ALL WHITE
WINDOW-BLACK
GRAY SCALE

19
12345
6
12345
6
12345
6
12345
6
12345
6
123456
SIGNAL ENTRY.
To make the signal entry, proceed as follows:
1Press the ADJUST button.
• The “ADJUST” menu is displayed.
NOTE: The projector may ask you to enter your passcode. See
61 for the explanation of the PASSCODE.
2Use the CURSOR or button to highlight the “1/SIGNAL
ENTRY” line and press ENTER.
• The “SIGNAL ENTRY” list will be displayed.
• You can also select the “SIGNAL ENTRY” list directly by
pressing the INPUT “1” button.
3Use the CURSOR or button to select the desired line and
press ENTER.
• The Signal entry menu will be displayed.
NOTE: To advance to the next page or to the previous page,
hold down the CTL button then press the
CURSOR or button. To directly access a page, hold down
the CTL button then press any one of the INPUT buttons.
On Signal Entry
The projector uses a micro-processor to automatically read and distinguish between all video signals input at the same time. These
signals are then used to make optimum adjustments for focus, convergence, alignment, etc. Various parameters must be registered
into the micro-processor beforehand to ensure the video signals are recognized and adjusted to optimum quality.
The Signal Entry registers these video signals in the SIGNAL ENTRY list and at the same time obtains the various parameters
pertaining to these signals. Always access this mode first whenever inputting video signals for the first time so that you can register
the video signals before making any adjustments. If the current input signal(s) has not been registered, the “UNREGISTERED
SIGNAL” message is displayed on screen.
NOTE: If you have software which changes scanning mode due to the graphic board of your PC (such as VGA), it will be necessary
to register signal entry for each scanning mode. This can be done using your PC by way of stopping the software in each scanning
mode and performing a signal entry operation.
Signal Entry Procedures
– ADJUST –
1 / SIGNAL ENTRY
2 / FOCUS
3 / ALIGNMENT
4 / CONVERGENCE
5 / KELVIN
6 / R,G,B GAIN
7 / PASSCODE
8 / OPTION
9 / REF.ADJUST
P01/10–2 SIGNAL ENTRY
STANDALONE
NO
01
02
03
04
05
06
07
08
09
10
FH
15.74kHz
15.74kHz
15.74kHz
15.74kHz
48.60kHz
FV
60.00Hz
60.00Hz
50.00Hz
50.00Hz
60.00Hz
DATE
00/00/00
00/00/00
00/00/00
00/00/00
00/00/00
P01/10–1 SIGNAL ENTRY
STANDALONE
NO
01
02
03
04
05
06
07
08
09
10
SOURCE
VIDEO
VIDEO
VIDEO
VIDEO
RGB
INPUT
A
A
A
A
A
NAME
NTSC3.58
NTSC4.43
PAL
SECAM
VESA1024
§ ©
Signal name Input terminal Entry dateRgistered input module
Connect condition of the Switcher
Vertical
Frequency
Horizontal
Frequency
Page / total pages – sheet No.
OUTPUT DATA : LIST NO.✻✻ OUTPUT DATA : LIST NO.✻✻
Output data for the signal currently projected.

20
SIGNAL ENTRY
4Use the CURSOR or button to select the item and then press
ENTER.
• The Input terminal menu will be displayed.
Items to select
• NEW ENTRY ........Registers a new signal.
• ENTRY COPY.......Copies any registered signal entry.
• ENTRY MOVE ......Moves any registered signal entry.
• ENTRY DELETE ... Deletes any registered signal entry from
SIGNAL ENTRY.
• DATA COPY ......... Copies gain data from any one of the
registered signals.
• CHANGE DEFAULT .Rewrites the data stored in DEFAULT AREA.
• SOURCE EDIT......Changes setting various parameteres of the
registered signals.
NOTE: When a vacant line is selected, the “SIGNAL ENTRY”
menu has three items only: “NEW ENTRY”, “ENTRY COPY” and
“ENTRY MOVE”.
mSelecting “NEW ENTRY”
When connecting a signal for the first time, you need to register it
into the projector’s memory. You can copy the initial setting for
the new signal from any other signal that has already been
registered or use the factory preset setting.
To do this, proceed as follows:
1) Use the CURSOR or button to select “NEW ENTRY”
and press ENTER.
• The “INPUT TERMINAL SELECT”menu will be displayed.
When using the projector in stand alone application:
Use the CURSOR or button to select one of the three slots,
and press ENTER.
Items to select
• INPUT A.......... Standard
• INPUT B.......... Optional board
• INPUT C.......... Optional board
Use the CURSOR or button to select “VIDEO”, “RGB”, “S-
VIDEO”, or “COMPO.”and press ENTER.
• The “NAME INPUT” screen will be displayed.
Items to select
•VIDEO......... Selecs the VIDEO input signal of this projector.
•RGB............ Selects the RGB input signal of this projector.
•S-VIDEO ..... Selects the S-VIDEO input signal of this projector.
•COMPO ...... Selects the Y/Cb/Cr input signal of this projector.
• Go on to Step 2).
SIGNAL ENTRY
NEW ENTRY
ENTRY COPY
ENTRY MOVE
ENTRY DELETE
DATA COPY
CHANGE DEFAULT
SOURCE EDIT
SIGNAL ENTRY
NEW ENTRY
ENTRY COPY
ENTRY MOVE
VIDEO
RGB
S-VIDEO
COMP.


TERMINAL SELECT
INPUT A
INPUT B
INPUT C

SIGNAL ENTRY
NEW ENTRY
ENTRY COPY
ENTRY MOVE
ENTRY DELETE
DATA COPY
CHANGE DEFAULT
SOURCE EDIT