NEFF C67M70S0GB - annexe 2 User manual

C67M70.0GB
*9000590636* 9000590636
[en] Instruction manual ..................................2

2
ÚTable of contents
Safety precautions .....................................................................3
Before installation ...............................................................................3
Safety notes .........................................................................................3
Information on the microwave ..........................................................3
Causes of damage .............................................................................4
Energy and environment tips .................................................... 5
Saving energy......................................................................................5
Environmentally-friendly disposal.....................................................5
Your new appliance....................................................................5
Control panel .......................................................................................5
Operating modes ................................................................................6
Shelf positions .....................................................................................6
Accessories .........................................................................................6
Cooking compartment .......................................................................7
Switching the appliance on and off ..........................................7
Switching on ........................................................................................7
Switching off ........................................................................................7
Before using the appliance for the first time ........................... 7
Setting the clock .................................................................................7
Changing the supply voltage............................................................8
Heating up the cooking compartment ............................................8
Cleaning the accessories..................................................................8
Operating the appliance ............................................................ 8
Setting the operating mode and temperature...............................8
MicroCombi, gentle/MicroCombi, intensive...................................9
Heating indicator.................................................................................9
Setting rapid heating ..........................................................................9
The microwave.......................................................................... 10
Notes regarding ovenware............................................................. 10
Microwave power settings.............................................................. 10
Setting the microwave..................................................................... 10
Combination .............................................................................11
Suitable microwave power settings.............................................. 11
Setting a combination ..................................................................... 11
Series of operations.................................................................11
Ovenware ......................................................................................... 11
Setting a series of operations ....................................................... 11
Memory......................................................................................12
Saving settings in the memory...................................................... 12
Starting the memory........................................................................ 12
Electronic clock........................................................................ 12
Clock display .................................................................................... 12
Minute minder................................................................................... 13
Cooking time .................................................................................... 13
End of operation .............................................................................. 13
Preset operation............................................................................... 13
Setting the clock .............................................................................. 13
Childproof lock......................................................................... 14
Lock.................................................................................................... 14
Permanent lock ................................................................................ 14
Automatic safety cut-out................................................................. 14
Auto start .................................................................................. 14
Basic settings........................................................................... 15
Changing the basic settings.......................................................... 15
Care and cleaning .................................................................... 15
Cleaning agents............................................................................... 15
Cleaning the glass cover ............................................................... 16
Cleaning the glass panels ............................................................. 17
Faults and repairs .................................................................... 17
Malfunction table.............................................................................. 18
Replacing the oven light bulb ....................................................... 18
Replacing the door seal ................................................................. 19
After-sales service ................................................................... 19
E number and FD number ............................................................. 19
Automatic programmes ........................................................... 19
Selecting a programme.................................................................. 19
Adjusting individually....................................................................... 20
Defrosting and cooking with the automatic programmes ....... 20
Tested for you in our cooking studio ..................................... 25
Defrosting, heating up and cooking with the microwave......... 25
Microwave tips ................................................................................. 28
Cakes and pastries ......................................................................... 28
Baking tips ........................................................................................ 30
Roasting and grilling ....................................................................... 30
Tips for roasting and grilling.......................................................... 34
Bakes, gratins, toast with toppings .............................................. 34
Convenience products.................................................................... 34
Slow cooking ............................................................................ 35
Using low-temperature cooking .................................................... 35
Slow cooking .................................................................................... 35
Tips for slow cooking...................................................................... 36
Test dishes................................................................................ 36
Baking................................................................................................ 37
Grilling................................................................................................ 37
Acrylamide in foodstuffs......................................................... 38
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at www.neff-
international.com and in the online shop www.neff-
eshop.com

3
ã=Safety precautions
Please read this instruction manual carefully. Only then will you
really be able to operate your appliance safely and correctly.
Please keep the instructions for use and installation instructions
in a safe place. Please pass on these manuals to the new
owner if you sell the appliance.
Before installation
Damage during transport
Check the appliance for damage after unpacking it. Do not
connect the appliance if it has been damaged in transit.
Electrical connection
Only a licensed expert may connect the appliance. You will lose
your warranty entitlement in the event of any damage caused
by incorrect connection.
Installation and connection
Please observe the special installation instructions.
Safety notes
This appliance is intended for domestic use only. This
appliance must only be used for food preparation.
Adults and children must not operate the appliance without
supervision,
■if they are physically or mentally incapable of doing so or
■if they have insufficient knowledge or experience.
Never let children play with the appliance.
Hot cooking compartment
Risk of burns!
■Never touch the hot surfaces of heating and cooking
appliances. Never touch the internal surfaces of the cooking
compartment or the heating elements. Open the cooking
compartment door carefully. Hot steam may escape. Small
children must be kept at a safe distance from the appliance
at all times.
■Never prepare food containing large quantities of drinks with
a high alcohol content. Alcoholic vapours can catch fire in the
cooking compartment. Use only small quantities of drinks
with a high alcohol content and open the cooking
compartment door carefully.
Risk of fire!
■Never store combustible items in the cooking compartment.
Never open the appliance door if there is smoke inside.
Switch off the appliance. Pull out the mains plug or switch off
the circuit breaker in the fuse box.
■Do not place greaseproof paper loosely over accessories
during preheating. A draught is created when the appliance
door is opened. The greaseproof paper may come into
contact with the heating element and catch fire. Always
weight down the greaseproof paper with a dish or a baking
tin. Only cover the surface required with greaseproof paper.
The greaseproof paper must not protrude over the
accessories.
Risk of short circuit!
Never trap connecting cables of electrical appliances in the hot
appliance door. The cable insulation could melt.
Risk of scalding!
Never pour water into the hot cooking compartment. This will
produce hot steam.
Hot accessories and ovenware
Risk of burns!
Never remove ovenware or accessories from the cooking
compartment without an oven cloth or oven gloves.
Damaged cooking compartment door or door seal
Risk of serious damage to health.!
Never use the appliance if the cooking compartment door or
the door seal is damaged. Microwave energy may escape. Only
use the appliance again once it has been repaired.
Heavily corroded surfaces
Risk of serious damage to health.!
The surface of the appliance could rust through over time if it is
not cleaned properly. Microwave energy may escape. Clean the
appliance on a regular basis.
Casing open
Risk of electric shock!
Never remove the casing. The appliance is a high-voltage
appliance.
Risk of serious damage to health.!
Never remove the casing. It prevents microwave energy from
escaping.
Hot or humid environment
Risk of short circuit!
Never subject the appliance to intense heat or humidity.
Improper repairs
Risk of electric shock!
■Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our
trained after-sales technicians.
■If the appliance is faulty, switch off the circuit breaker in the
fuse box or disconnect the appliance at the mains. Call the
aftersales service.
People with electronic implants
Risk of serious damage to health.!
For wearers of electronic implants, e.g. pacemakers or insulin
pumps:
Never approach the appliance directly when you are making
settings or cleaning. there are strong magnets in the control
knobs. They enable the control knobs to be retracted. Implants
may be affected by magnetic fields.
Information on the microwave
Preparing food
Risk of fire!
Only use the microwave to prepare food which is fit for
consumption. Using the microwave for other purposes may be
dangerous and may result in damage, e.g. heated slippers and
grain or cereal pillows could catch fire, even several hours later.
Ovenware
Risk of injury!
■Porcelain or ceramic ovenware can have small perforations in
the handles or lids. These perforations conceal a cavity

4
below. Any moisture that penetrates this cavity could cause
the ovenware to crack.
■Only use ovenware that is suitable for use in a microwave.
Risk of burns!
Hot food can heat up ovenware. Always use an oven cloth or
oven gloves to remove ovenware and accessories from the
cooking compartment.
Microwave power and time
Risk of fire!
Do not select a microwave power or time setting that is higher
than necessary. The food could catch fire and cause damage
to the appliance. Follow the information provided in this
instruction manual.
Packaging
Risk of fire!
■Never heat food in heat-retaining packages.
■Do not leave food heating unattended in containers made of
plastic, paper or other combustible materials.
Risk of burns!
Airtight packaging may burst when food is heated. Follow the
information provided on the packaging.
Drinks
Risk of scalding!
There is a possibility of delayed boiling when a liquid is heated.
This means that the liquid reaches boiling temperature without
the usual steam bubbles rising to the surface. Even if the
container only vibrates a little, the hot liquid can suddenly boil
over and spatter. When heating liquids, always place a spoon in
the container. This will prevent delayed boiling.
Risk of explosion!
■Never heat drinks in containers that have been tightly sealed.
■Never overheat alcoholic drinks.
Baby food
Risk of burns!
Never heat baby food in closed containers. Always remove the
lid or teat. Stir or shake well after the food has been heated.
This is the only way to ensure even heat distribution. Check the
temperature of the food before it is given to the child.
Foods with shells or skin
Risk of burns!
■Never cook eggs in their shells. Never reheat hard-boiled
eggs as they may crack or explode. The same applies to
shellfish and crustaceans. Always prick the yoke when
baking or poaching eggs.
■Always prick the skin of foods that have a skin or peel
such as apples, tomatoes, potatoes and sausages before
cooking. to prevent the peel or skin from bursting.
Drying food
Risk of fire!
Never use the microwave to dry food.
Food with a low water content
Risk of fire!
Never defrost or heat food with a low water content, e.g. bread,
at too high a power or for too long.
Cooking oil
Risk of fire!
Never use the microwave to heat cooking oil on its own.
Causes of damage
Caution!
■Baking tray, greaseproof paper, aluminium foil or ovenware
on the cooking compartment floor: Do not place baking trays
or ovenware on the cooking compartment floor. Do not line
the cooking compartment floor with aluminium foil. This will
cause heat accumulation. The baking and roasting times will
no longer be correct and the enamel will be damaged.
■Foil containers: Do not use foil containers in the appliance.
They damage the appliance by producing sparks.
■Water in the hot cooking compartment: Never pour water into
the hot cooking compartment. This will cause steam. The
temperature change can cause damage to the enamel.
■Moist food: Do not store moist food in the closed cooking
compartment for long periods. This will damage the enamel.
Do not use the appliance to store food. This can lead to
corrosion.
■Fruit juice: When cooking very moist fruit flans, do not fill the
universal pan too generously. Fruit juice which runs out of the
universal pan leaves behind stains which cannot be removed.
■Cooling with the appliance door open: Only leave the
cooking compartment to cool with the door closed. Do not
trap anything in the appliance door. Even if the door is only
slightly ajar, the fronts of adjacent units may be damaged
over time.
■Heavily soiled seal: If the seal is very dirty, the appliance door
will no longer close properly during operation. The fronts of
adjacent units could be damaged. Always keep the seal
clean.
■Using the appliance door for standing on or placing objects
on: Do not stand or place anything on the open appliance
door. Do not place ovenware or accessories on the appliance
door.
■Transporting the appliance: Do not carry or hold the
appliance by the door handle. The door handle cannot
support the weight of the appliance and could break.
■Operating the microwave without food: The microwave must
only be switched on when there is food in the cooking
compartment. The appliance may be overloaded if it is
switched on without any food inside. An exception to this rule
is for short-term testing of ovenware (see notes on
ovenware).
■Microwave popcorn: Never set the microwave power too
high. Use a power setting no higher than 600 watts. Always
place the popcorn bag on a glass plate. The disc may jump if
overloaded.

5
Energy and environment tips
Here you can find tips on how to save energy when baking and
roasting and how to dispose of your appliance properly.
Saving energy
Only preheat the oven if this is specified in the recipe or in the
operating instruction tables.
Use dark, black lacquered or enamelled baking tins. They
absorb the heat particularly well.
Open the appliance door as little as possible during cooking,
baking or roasting.
It is best to bake several cakes one after the other. The cooking
compartment is still warm. This may reduce the baking time for
the second cake.
For longer cooking times, you can switch the oven off
10 minutes before the end of the cooking time and use the
residual heat to finish cooking.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
Your new appliance
In this section, you will find information on
■the control panel
■the operating modes
■the shelf heights
■the accessories
Control panel
This appliance complies with European Directive
2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE). The directive gives a framework for
the collection and recycling of old appliances, which is
valid across the EU.
    3 0 6WDUW 6WRS
+RWDLUSOXV
7H[WGLVSOD\
0LFURZDYH
SRZHUVHWWLQJV
(OHFWURQLFFORFN 7HPSHUDWXUHGLVSOD\
2SHUDWLQJPRGHVHOHFWRU
7HPSHUDWXUHVHOHFWRU
,QIREXWWRQ
%XWWRQIRUDVHULHV
RIRSHUDWLRQV
ORFN
IXQFWLRQEXWWRQ
2SHUDWLQJ
FRQWUROV
5RWDU\
VHOHFWRU

Operating
controls Use
90 Selects 90 watt microwave power
180 Selects 180 watt microwave power
360 Selects 360 watt microwave power
600 Selects 600 watt microwave power
900 Selects 900 watt microwave power
°±² Selects a series of operations
ÃClock function button
Selects the required clock function or
rapid heat up (see section: Electronic
clock)
Rotary selector
Makes the settings in one of the clock
functions or switches on rapid heat up
(see section: Electronic clock)
Operating mode selector
Selects the desired operating mode (see
section: Switching on the appliance)
±Info button
Shows the current temperature during the
heating up period (see section: Switching
on the appliance)
Opens the Basic Settings menu (see
section: Changing basic settings)
Temperature selector
Sets the temperature (see section:
Switching on the appliance)
Changes the settings on the Basic
Settings menu (see section: Changing
basic settings)
ìNavigation button
Switches between lines on the text display.
Operating
controls Use

6
Microwave power settings and operating controls
When you press a button, the relevant item lights up on the
display.
Retractable operating knob
The rotary, temperature and operating mode selectors can be
pushed in and popped out. Press them towards the relevant
operating knob to pop it in and out.
Operating modes
Below is an overview of the operating modes on your
appliance.
Shelf positions
The accessories can be inserted into the cooking compartment
at 3 different levels.
Note: The accessories can become deformed when they
become hot. As soon as they have cooled down, the
deformation disappears with no effect on the function.
Accessories
The following accessories are supplied with your appliance:
You can obtain further accessories from specialist retailers:
XSelects automatic programmes
lSelects the memory
ƒStarts oven operation
„Stops oven operation or cancels a setting
Operating modes and
temperature range Application
3Hot air
30-250 °C For baking and roasting on one level.
2Hot air plus
30-250 °C For baking cakes and small baked items on two levels.
%Top/bottom heat
30-300 °C For baking and roasting on one level. Especially suitable for cakes
with moist toppings
(e.g. cheesecake).
$Bottom heat
30-200 °C For food and baked goods which should form a crust or which need
more browning on the underside.
Only activate Bottom heat for a
short while at the end of the
baking time.
4Circo-roasting
100-250 °C For poultry and larger pieces of meat.
+Full-surface grill
low (1)
medium (2)
high (3)
For large amounts of flat, small
items for grilling (e.g. steaks,
sausages).
(Centre-area grill
low (1)
medium (2)
high (3)
For small amounts of flat, small
items for grilling (e.g. steaks,
bread).
/Low-temperature
cooking
70-100 °C
For tender pieces of meat, that are
to be cooked medium, medium
rare or “à point”.
àMicroCombi,
gentle
30-250 °C
For sponge mixture in tins, short-
crust pastry with moist filling and
cakes made from baking mixtures.
For oven operation, a lower
microwave power setting is
switched on automatically.
áMicroCombi,
intensive
30-250 °C
For poultry, fish and bakes. When
the oven is operating, a medium
microwave power setting is
automatically activated.
çKeep warm
60-100 °C For keeping food warm.
Caution!
Warm food spoils more quickly. Do
not keep the food warm for longer
than two hours.
Operating
controls Use
Universal pan
For large roasts, dry and moist
cakes, bakes and gratins.
It can also act as a splash guard if
you are grilling meat directly on the
wire rack. Slide the universal pan
into the oven with the tapered edge
facing the oven door.
Wire rack
For ovenware, cake tins, roasts and
grilled food.
Wire rack
For grilled food.
Always place the wire insert in the
universal pan. This ensures that
dripping fat and meat juices are
collected.
Accessories Order number
Baking tray, enamelled Z6360X0
Glass pan Z6370X0




7
After-sales service products
You can obtain suitable care and cleaning agents and other
accessories for your domestic appliances from the after-sales service, specialist retailers or (in some countries) online via the eShop. Please specify the relevant product number.
Cooking compartment
Your appliance has a cooling fan.
Cooling fan
The cooling fan switches on and off as required. The hot air
escapes above the door.
Caution!
do not cover the ventilation slots. Otherwise the oven will
overheat.
Notes
■The cooling fan continues to run for a certain time after
operation.
■The appliance remains cool during microwave operation. The
cooling fan will still switch on. The fan may run on even when
microwave operation has ended.
■Condensation may appear on the door window, interior walls
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Switching the appliance on and off
Use the operating mode selector to switch the compact
microwave oven on and off.
Switching on
1.Press the operating mode selector.
“Appliance is ready for use” appears on the text display. The
appliance switches on.
2.Select a function:
■90, 180, 360, 600 or 900 W button for a microwave power
level
■°±² button = series of operations
■Setting an operating mode and temperature
■Xbutton = automatic programmes
■lbutton = memory programme
You can read how to make settings in the various sections.
Switching off
Turn the operating mode selector back to the Ûposition and
push it in. The oven switches off. A timer counting down or the
residual heat in the cooking compartment is shown.
Before using the appliance for the first time
In this section, you can read about
■how you set the clock
■how you clean your appliance before using it for the first time
■how you change the supply voltage
Setting the clock
‹:‹‹ flashes in the clock display.
1.Press the clock function button.
The KJ and 3symbols light up. ‚ƒ:‹‹ appears in the
clock display.
2.Turn the rotary selector to set the current time.
Your setting is automatically adopted after 3 seconds.
Changing the clock
To change the time subsequently, press the clock function
button repeatedly until the KJ and3symbols light up again.
Use the rotary selector to change the time.
Cleaning cloths for stainless-steel surfaces Product no. 311134 Reduces the build-up of dirt. Impregnated with a special oil for
perfect maintenance of your appliance's stainless-steel
surfaces.
Oven and grill cleaning gel Product no. 463582 For cleaning the cooking compartment. The gel is odourless.
Microfibre cloth with honeycomb structure Product no. 460770 Especially suitable for cleaning delicate surfaces, such
as glass, glass ceramic, stainless steel or aluminium. The
microfibre cloth removes liquid and grease deposits in one go.
Door lock Product no. 612594 To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently.
See the information sheet supplied with the door lock.

8
Changing the supply voltage
Before you use your appliance for the first time, change the
supply voltage to 230240 V.
The supply voltage can be changed at any time.
See the Basic settings section.
Heating up the cooking compartment
To get rid of the new cooker smell, heat up the cooking
compartment when it is empty and the oven door closed.
Set %Top/bottom heat and 240 °C.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Ventilate the kitchen while the oven is heating up.
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Using the operating mode selector, select %Top/bottom
heat.
3. Using the temperature selector, set the temperature to
240 °C
4. Press the ƒbutton.
5. After 60 minutes, switch off the appliance using the operating
mode selector.
Once the cooking compartment has cooled, clean it with hot,
soapy water.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Operating the appliance
In this section, you can read about
■which operating modes are available for your oven.
■how to select an operating mode and temperature.
■how to set rapid heat up
Your compact microwave oven offers you a wide variety of
operating modes. A default temperature always appears when
you make a setting.
Setting the operating mode and temperature
Example in picture:
%Top/bottom heat, 200 °C.
1. Turn the operating mode selector until the desired operating
mode appears in the text display.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
3. Press the ƒbutton.
Appliance operation begins. The heating bars in the
temperature indicator appear in the temperature display.
Switching off
When the meal is ready, switch off the oven using the operating
mode selector or make new settings.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Opening the oven door during cooking
Operation is suspended. ƒflashes. After closing the door,
press the ƒbutton again. The programme will then continue.
Pausing operation
Press the „button briefly. ƒflashes. The oven is paused.
Press theƒbutton again to continue operation.
Cancelling operation
Switch off the oven using the operating mode selector.
Notes
■If you also set a cooking time, the operation which you have
set will automatically switch off at the end of this time. See the
section Electronic clock.
■If you enter a cooking time and end time, the operation which
you have set will automatically switch on and off. See the
section Electronic clock.
Operating mode Suggested
temperature in
°C
Temperature range
in °C
3Hot air 160 30-250
2Hot air plus 160 30-250
%Top/bottom heat 180 30-300
$Bottom heat 180 30-200
4Circo-roasting 190 100-250
+Full-surface grill high (3) medium (2)
low (1)
(Centre-area grill high (3) medium (2)
low (1)
/Slow cooking 80 70-100
àMicroCombi,
gentle 180 30-250
áMicroCombi,
intensive 200 30-250
çKeep warm 70 60-100
7RSERWWRPKHDW

9
MicroCombi, gentle/MicroCombi, intensive
For these types of heating, a microwave power setting is
automatically switched on. You simply need to set the
temperature specified in the recipe and halve the cooking time.
MicroCombi, gentleà
MicroCombi, gentle is suitable for cakes in tins, such as
■Sponge cake, e.g. marble cake, fruit loaf, fruit flan
■Short-crust pastry with moist filling, e.g. apple pie,
cheesecake
■Cakes made from baking mixtures
■Yeast cake, e.g. with currants
■For roasting, the cooking time can also be halved with this
type of heating.
Note: Use dark metal baking tins or else plastic "FlexiForm"
bakeware. For joints, a heat-resistant glass dish with or without
a lid is suitable.
MicroCombi, intensiveá
This type of heating is suitable for
■poultry, e.g. chicken
■baked casseroles, e.g. pasta bake
■gratins, e.g. potato gratin
■grilled fish, fresh and frozen
Note: Use heat-resistant containers made of glass or ceramic.
Setting procedure
If there is information in the recipe for different types of heating,
take the setting for Top/bottom heating. The cooking time
specified in the recipe should not be less than 30 minutes.
Place your food in the cold cooking compartment. Place the
ovenware in the centre of the wire rack at level 1.
1.Using the rotary selector, set the “MicroCombi, gentle” or
“MicroCombi, intensive” heating type.
A preset cooking time of x20:00 minutes is suggested.
2.Use the temperature selector to set the temperature.
3.Press the clock function button Ãrepeatedly until the KJ
and xsymbols light up.
4.Change the cooking time using the rotary selector.
5.Press the ƒbutton.
Appliance operation begins.
The cooking time has elapsed
A signal sounds. Operation has finished. You can stop the
audible signal by pressing the Ãbutton. The clock display
shows y0:00.
Heating indicator
The five bars in the heating indicator show the heating phase
and the residual heat in the cooking compartment.
Current temperature
Press the ±button. The current temperature is displayed for
3seconds.
Heating phases
When the oven is started, five bars appear in the status bar.
The set temperature has been reached when the last bar is
filled.
If you have selected a grill setting or the microwave, the bars
do not appear.
You can use the ±button to check the current heating
temperature while the oven is heating up. Due to thermal
inertia, the temperature displayed may differ slightly from the
actual temperature in the cooking compartment.
■Temperature reached (Figure A)
■Appliance reheating to temperature (figure B)
Residual heat indicator
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Setting rapid heating
The rapid heat up function is not suitable for all operating
modes.
Suitable operating modes
■3Hot air
■2Hot air plus and
■%Top/bottom heat
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Condition: a suitable operating mode and temperature must
have been set.
1.Set the operating mode and temperature.
2.Repeatedly press the clock function button until the KJuand
fsymbols light up and Œappears on the clock display.
3.Turn the rotary selector clockwise.
The clock display shows Žand the fsymbol lights up.
Rapid heat up is activated.
4.Press theƒbutton.
The appliance heats up.
To ensure an even cooking result, do not place your food in the
oven until rapid heat up is complete.
The rapid heat up process is complete
After reaching the set temperature, Rapid heat up switches off.
The fsymbol goes out. Put your food in the oven.
Cancelling rapid heat up
Press the clock function button repeatedly until Žappears on
the clock display. Turn the rotary selector anti-clockwise until
Temperature display Text display
•Residual heat high
œResidual heat low
$ %

10
Œappears on the clock display. The fsymbol on the clock
display goes out.
Notes
■If you change an operating mode, rapid heat up is cancelled.
■You can use the ±button to check the current cooking
compartment temperature during rapid heating.
■Once a cooking time has been set, it will start counting down
immediately after the oven is started, regardless of the rapid
heat up function.
■If you open the oven door during cooking, rapid heat up-up is
cancelled.
The microwave
Microwaves are converted to heat in foodstuffs. The microwave
can be used solo, i.e. on its own, or in combination with a
different type of heating.
In this section, you will find
■information about ovenware
■how to set the microwave
Note: In the Tested for you in our cooking studio section, you
will find examples for defrosting, heating and cooking with the
microwave oven.
Notes regarding ovenware
Suitable ovenware
Suitable dishes are heat-resistant ovenware made of glass,
glass ceramic, porcelain, ceramic or heat-resistant plastic.
These materials allow microwaves to pass through.
You can also use serving dishes. This saves you having to
transfer food from one dish to another. You should only use
ovenware with decorative gold or silver trim if the manufacturer
guarantees that they are suitable for use in microwaves.
Unsuitable ovenware
Metal ovenware is unsuitable. Metal does not allow microwaves
to pass through. Food in covered metal containers will remain
cold.
Caution!
Creation of sparks: metal – e.g. a spoon in a glass – must be
kept at least 2 cm from the oven walls and the inside of the
door. Sparks could destroy the glass on the inside of the door.
Ovenware test
Do not switch on the microwave unless there is food inside. The
following ovenware test is the only exception to this rule.
Perform the following test if you are unsure whether your
ovenware is suitable for use in the microwave:
1. Heat the empty ovenware at maximum power for ½ to
1 minute.
2. Check the temperature occasionally during that time.
The ovenware should still be cold or warm to the touch.
The ovenware is unsuitable if it becomes hot or sparks are
generated.
Microwave power settings
Use the button to set the desired microwave power.
Notes
■When you press a button, the selected power lights up.
■The microwave power can be set to 900 watts for a
maximum of 30 minutes. With all other power settings, a
maximum cooking time of 1 hour 30 minutes is possible.
Setting the microwave
Example: microwave power 600 W, cooking time 15 minutes
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press the button for the microwave power setting you require.
The button lights up and‚.‹‹minutes appears as the
suggested figure on the clock display.
3. Set the cooking time using the rotary selector.
4. Press the ƒbutton.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. You can
stop the audible signal by pressing the Ãbutton. Switch off or
reset the appliance.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Opening the oven door during cooking
Operation is suspended. ƒflashes. After closing the door,
press the ƒbutton. The programme will then continue.
Pausing operation
Press the „button briefly. ƒflashes. The oven is paused.
Press the ƒbutton again, operation continues.
Cancelling operation
Press the „button twice, or press and hold the „button, until
the “Appliance is ready for use” heading appears. You can now
change the settings.
Note: If you open the appliance door during cooking, the fan
may continue to run.
90 W for defrosting delicate foods
180 W for defrosting and continued cooking
360 W for cooking meat and heating delicate foods
600 W for heating and cooking food
900 watts for heating liquids

11
Combination
This involves the simultaneous operation of another operating
mode with the microwave. Using the microwave makes your
meals ready more quickly, and still browns them nicely.
You can set a cooking time of up to 1 hour 30 minutes.
In this section, you can read about
■which operating modes and microwave power settings are
suitable
■how to set combination mode
Suitable operating modes
■3Hot air
■2Hot air plus
■%Top/bottom heat
■4Circo-roasting
■+Full-surface grill
■(Grill, small
Note: Rapid heat up cannot be switched on in combination
mode.
Suitable microwave power settings
All microwave power settings, except for 900 watts, can be
combined with an operating mode.
Setting a combination
Example: microwave 360 W, 17 minutes and %Top/bottom
heat 200 °C.
1.Turn the operating mode selector until %Top/bottom heat
appears on the text display.
The temperature display suggests 180 °C.
2.Set the temperature selector to 200 °C.
3.Press the button for the microwave power setting you require.
The clock display shows ‚†:‹‹ mins and the xsymbol.
4.Set the cooking time using the rotary selector.
5.Press the ƒbutton.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Combination operation has finished. You can
stop the audible signal by pressing the Ãbutton. Switch off or
reset the appliance.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Opening the oven door during cooking
Operation is suspended. ƒflashes. After closing the door,
press the ƒbutton. The programme will then continue.
Pausing operation
Press the „button briefly. ƒflashes. The oven is paused.
Press the ƒbutton again, operation continues.
Cancelling operation
Press the „button twice, or press and hold the „button, and
switch off using the operating mode selector.
Note: If you also enter an end time, the operation which you
have set will switch on and off automatically. See the section
Electronic clock.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Can be used with:
■all microwave power settings
■combination mode
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Requirement: the operating mode selector must not be pushed
in.
1.Press the °±² button.
The °for the first operation in the series lights up.
2.Set the first microwave power setting and cooking time.
3.Press the °±² button again.
The ±for the second operation in the series lights up.
4.Set the second microwave power setting and cooking time.
5.Press the °±² button again.
The ²lights up for the third operation in the series.
6.Set the third microwave power setting and cooking time.
7.Press the ƒbutton.
Appliance operation begins. The clock display shows the
cooking time of the first operation in the series. The °for the
first operation in the series lights up.
Checking the total or remaining cooking time
Press the clock function button Ãtwice to display the
remaining cooking time.
The cooking time has elapsed
A signal sounds. The series of operations is finished. To stop
the signal, press the „button. Switch off or reset the
appliance.
Opening the oven door during cooking
Operation is suspended. ƒflashes. After closing the door,
press the ƒbutton. The programme will then continue.
Changing the setting
Changes can only be made before operation begins. Press
the °±² button to go to the desired setting, and make the
changes.
Note: You can also combine an operating mode with the
SeriesOperations function. First, set the oven operating mode.

12
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
In this section, you can read about
■how to save the memory
■how to start the memory
Saving settings in the memory
Requirement: the operating mode selector must not be pushed
in.
1. Set the operating mode, temperature and cooking time for
the meal you wish to cook or select a programme. Do not
start.
2. Press the lbutton.
“Memory 1 free” appears.
3. Using the operating mode selector, select one of the six
memory locations.
4. Press and hold the lbutton, a signal sounds and “Memory
saved” appears.
Starting the memory
You can start cooking at any time using the settings saved for
your meal.
Requirement: the operating mode selector must not be pushed
in.
Place your food in the cooking compartment.
1. Press and release the lbutton and use the rotary selector
to select the memory location.
The stored settings are displayed. If “Memory location empty”
appears, no setting has been saved in this memory location
yet.
2. Press the ƒbutton.
The memory setting starts.
Changing the memory location
Once operation has started, you can no longer change the
memory location.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
Electronic clock
Your appliance has various clock functions.
In this section, the following are explained:
■The clock display
■How to set the timer
■How to switch off your appliance automatically (cooking time
and end of operation)
■How to switch your appliance on and off automatically
(preselection mode)
■How to set or change the clock.
Clock display
Notes
■Between the times ƒƒ:‹‹ and †:†Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■When using the minute minder Q, cooking time x, end
time yand preselection mode clock functions, a signal
sounds and the corresponding symbol flashes when the set
time has expired. To stop the audible signal early, press the
clock function button.
■You can check your settings at any time. Press the clock
function button repeatedly until the corresponding symbol
lights up.
■If you wish to cancel a setting, turn the set time back to ‹:‹‹
and switch the appliance off.
■The setting can be corrected using the rotary selector if
necessary.
ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU
Clock function Use
QTimer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
xCooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ‚:„‹ hours)
yEnd of operation The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ )
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
3Clock Setting the clock
fRapid heat up Shortens the heat up time

13
Switching the clock display on and off
Turn the operating mode selector back to the Ûposition and
push it in.
1.Press and hold the clock function button Ãfor a few
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
2.Press and hold the clock function button Ãfor a few
seconds.
The clock display switches on.
Minute minder
1.Press the clock function button Ãrepeatedly until the KJ
andQsymbols light up.
2.Use the rotary selector to set the cooking time (e.g. †:‹‹
minutes).
The setting is applied automatically. Afterwards, the clock is
displayed again and the timer counts down.
Cooking time
Automatic switch off after a certain period of time.
1.Set the operating mode and temperature.
2.Press the clock function button Ãrepeatedly until the KJ
and xsymbols light up.
3.Set the cooking time using the rotary selector
(e.g. ‚:„‹ hours).
4.Press the ƒbutton.
The appliance heats up.
5.Turn operating mode selector to Ûposition and press in.
Once operation time has elapsed, the appliance switches off
automatically.
End of operation
Automatic switch-off at a set time.
1.Set the operating mode and temperature.
2.Press the clock function button Ãrepeatedly until the KJ
andysymbols light up.
3.Set the end of operation using the rotary selector
(e.g. ‚ƒ:„‹).
4.Press the ƒbutton.
The appliance switches off automatically at the time that has
been set for the end of operation.
5.Turn operating mode selector to Ûposition and press in.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the clock functions for cooking
time xand end of operation y.
1.Set the operating mode and temperature.
2.Press the clock function button Ãrepeatedly until the KJ
and xsymbols light up.
3.Set the cooking time using the rotary selector
(e.g. ‚:„‹ hours).
4.Press the clock function button Ãrepeatedly until the KJ
and ysymbols light up.
5.Set the end of operation using the rotary selector
(e.g. ‚ƒ:„‹).
6.Press the ƒbutton.
The appliance waits until the appropriate time to switch on (in
the example shown, ‚‚:‹‹).
The appliance switches off automatically at the time set for
the end of operation (‚ƒ:„‹). A signal sounds and the y
symbol flashes.
7.Turn operating mode selector to Ûposition and press in.
Setting the clock
1.Press the clock function button Ãrepeatedly until the KJ
and 3symbols light up.
2.Turn the rotary selector to set the current time.
The setting is applied automatically.
Changing the clock
e.g. from British Summer Time to Greenwich Mean Time.
Make the settings as described in steps 1 and 2.

14
Childproof lock
The oven has a childproof lock to prevent children from
switching it on by accident or changing an operation that is
already in progress.
In this section, you can read about
■how to lock your appliance
■how to lock your appliance permanently
Lock
To switch the appliance on again, you must unlock it. The
appliance is not locked automatically after operation. Lock it
again if necessary or activate the permanent lock.
Locking the appliance
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press and hold the Info button ±.
“Select language” appears on the text display.
3. Press the Info button ±again.
™‚‹ appears on the temperature display.
4. Turn the temperature selector until ™‚‚ appears on the
temperature display.
5. Press and hold the ±Info button until the ‚symbol appears
on the temperature display.
Note: If you attempt to make settings, -†- appears on the
temperature display and “Appliance controls locked” on the
text display.
Unlocking the appliance
1. Press the operating mode selector.
2. Press and hold the ±Info button until ™‚‚ appears on the
temperature display.
3. Turn the temperature selector until ™‚‹ appears on the
temperature display.
4. Press and hold the ±Info button until the ‚symbol goes
out.
Permanent lock
To make settings, you must temporarily interrupt the permanent
lock. Once you have switched off your appliance, it locks again
automatically.
Locking the appliance permanently
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press and hold the Info button ±.
“Select language” appears on the text display.
3. Press the Info button ±again.
™‚‹ appears on the temperature display.
4. Turn the temperature selector until ™ƒ‚ appears on the
temperature display.
5. Press and hold the Info button ±.
“Appliance is ready for use” appears on the text display.
Your appliance will be locked after 30 seconds. The ‚symbol
appears on the temperature display.
Note: If you attempt to make settings, -†˜- appears on the
temperature display and “Appliance controls permanently
locked” on the text display.
Interrupting the permanent lock
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press and hold the ±Info button until ™ƒ‚ appears on the
temperature display.
3. Turn the temperature selector until ™ƒ‹ appears on the
temperature display.
4. Press and hold the ±Info button until the ‚symbol goes
out.
The permanent lock is interrupted.
5. Switch the appliance on within 30 seconds.
The permanent lock is activated again once the appliance is
switched off.
Unlocking the appliance permanently
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press and hold the ±Info button until ™ƒ‚ appears on the
temperature display.
3. Turn the temperature selector until ™ƒ‹ appears on the
temperature display.
4. Press and hold the ±Info button until the ‚symbol goes
out.
5. Within 30 seconds, press and hold the ±Info button again for
a few seconds.
6. Turn the temperature selector until ™‚‹ appears on the
temperature display.
7. Press and hold the Info button ±.
The appliance is permanently unlocked.
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and ‹‹‹ flashes in
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the Ûposition to
deactivate it.
Auto start
Your appliance is set in such a way that you must press the ƒ
button, so that the set oven operation starts.
With “Auto start”, oven operation starts automatically after the
oven door is closed.
In the section "Changing basic settings", you can read about
how to change to Auto start mode.

15
Basic settings
Your appliance has various basic settings, which you can
adjust to suit your needs at any time. Note: In the table, you will find all the basic settings and options for changing them. Only the basic settings that correspond to
the features of your specific appliance are displayed.
Changing the basic settings
Requirement: the operating mode selector must not be pushed
in.
1.Press and hold the ±button for a few seconds.
The first basic setting is displayed on the text display.
2.Press the ±button repeatedly until the required basic setting
is shown.
3.Use the temperature selector to make the desired setting.
4.Press and hold the Info button ±for a few seconds.
Your setting is applied.
You can change the settings at any time.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
In this section, you will find information on
■Cleaning and care of your appliance
■Cleaning agents
■Cleaning the glass panels
■Cleaning the glass cover
ã=Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
ã=Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
Notes
■Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
■Unpleasant odours, e.g. after fish has been prepared, can be
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
■sharp or abrasive cleaning agents,
■metal or glass scrapers to clean the glass in the appliance
door,
■metal or glass scrapers to clean the door seal,
■hard scouring pads and sponges,
■cleaning agents with high concentrations of alcohol.
Wash new sponge cloths thoroughly before use.
Basic setting Options Explanation
- Select language:
English 5 other languages are possible Language for the text display
™‚ ‹ = appliance controls unlocked ‚= appliance controls permanently
locked
Activating the childproof lock
™ƒ ‹ = appliance controls unlocked one-
time
‚= appliance controls permanently
locked
Activating the childproof lock permanently
™„ ƒ = audible signal, medium ‹= off
‚= short = 30 seconds
ƒ= medium = 2 minutes
„= long = 10 minutes
Signal after the cooking time has elapsed
™… ‹ = Continue when door shut:
off
‚= automatic
‹= off*
Way in which operation is continued when
the oven door is opened and closed
again
*Continue operation with ƒ
™† Adjust individually
-3 ÙÙÙØÙÙÙ +3
e.g. increasingly well done cooking
result
-3 ÙÙÙÙÙØÙ +3
Change the cooking result for all
automatic programmes
to the right = more intensive
to the left = less intensive
™‡ Set the mains voltage
‚= 220-230V
ƒ= 230-240 V Adjust the mains voltage
™ˆ ‚ = do not restore factory settings ƒ= restore factory settings Reverse all changes and restore basic
settings.

16
Cleaning the self-cleaning surfaces in the cooking
compartment
The back wall and ceiling are coated with self-cleaning enamel.
They clean themselves while the oven is in operation.
Sometimes, larger splashes of food may not disappear until the
oven has been operated several times.
Notes
■Never treat the self-cleaning surfaces with oven cleaner. If
oven cleaner accidentally gets onto the back wall or ceiling,
remove it immediately with a sponge and plenty of water.
■Never use abrasive cleaning agents. You will scratch or
destroy the highly porous coating.
■Never treat the self-cleaning surfaces with a scouring pad.
■Light discolouration of the enamel does not affect self-
cleaning.
Cleaning the cooking compartment floor and side walls
Use a dish cloth and hot soapy water or a vinegar solution.
If there are heavy deposits of dirt, use a stainless steel scouring
pad or oven cleaner. Only use in a cold oven.
Cleaning the glass cover
The glass cover can be removed from the oven ceiling for
cleaning.
ã=Risk of burns!
Do not remove the panels immediately after switching the
appliance off. The oven must be cold.
Removal
1. Place a tea towel in the oven.
2. Pull the clip on the oven ceiling forwards. (Fig. A)
Press the front of the glass cover down using the thumb of
your other hand. Let go of the clip.
3. Slide the cover forwards using both hands and rest it on the
grill element. (Fig. B)
4. Slide it slightly backwards again. (Fig. C)
5. Tilt down at the side and remove. (Fig. D)
ã=Risk of injury!
Never touch or clean the microwave antenna (A)!
For light soiling:
Wash the glass cover using hot soapy water.
For heavy soiling:
Clean the glass cover in the same way as the enamel surfaces
in the oven.
Refitting
1. Slide in the cover with the smooth side facing downwards
and rest it on the grill element. (Fig. A)
2. Use both hands to slide it back into the two catches. (Fig. B).
3. Pull the clip forwards and push the glass cover upwards. Let
go of the clip. (Fig. C)
Area Cleaning agents
Appliance front Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
metal or glass scrapers for cleaning.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues. Special stainless
steel cleaning agents can be obtained
from the after-sales service or from
specialist shops.
Oven Hot soapy water or a vinegar solution:
Clean with a dish cloth and dry with a
soft cloth.
If oven is very dirty: use oven cleaner,
but only when oven is cold. It is best to
use a stainless-steel sponge.
Glass cover for the
oven light Hot soapy water: Clean with a dish cloth.
Control panel/outer
door panel Glass cleaner: Wipe dry immediately using a soft cloth.
Do not use a glass scraper.
Inner door glass Glass cleaner:
Wipe dry with a soft cloth. Do not use a
glass scraper.
Seal Hot soapy water:
Clean with a dish cloth, do not scour.
Do not use a metal or glass scraper for
cleaning.
Accessories Hot soapy water:
Soak and clean with a dish cloth or a
brush.
$%
$
'
$%

17
Remove the tea towel from the oven.
ã=Risk of serious damage to health.!
Never operate the appliance without the microwave glass
cover. Microwave energy may escape.
Cleaning the glass panels
The glass panels on the oven door can be removed to allow
more thorough cleaning.
ã=Risk of burns!
Do not remove the panels immediately after switching the
appliance off. The oven must be cold.
Removal
1.Open the oven door.
2.Undo the two screws on the door using a flat-bladed
screwdriver (blade width 8-11 mm). Hold the door panel
firmly while doing this. (Fig. A).
3.Position the door at an angle and pull out the panel upwards
by the door handle. (Fig. B).
4.Close the door.
Notes
■Clean the glass panel with glass cleaner and a soft cloth.
■Do not use any sharp or abrasive agents. The glass scraper
is not suitable.
Refitting
1.Insert the door panel into the guide with both hands. (Fig. A).
2.Push the door panel downwards, lift it slightly and hook it in
at the top. (Fig. B).
Make sure that the door panel is sitting flush with the control
panel.
3.Fully open the door, while holding the panels firmly with one
hand. (Fig. C).
4.Push the door downwards again and tighten the screws
hand-tight using a flat-bladed screwdriver (blade width 8-
11 mm), close the door. (Fig. D).
Caution!
You must not use the oven again until the panels have been
properly refitted.
Faults and repairs
It is not always necessary to call the after-sales service.
Sometimes, you can find a remedy yourself. You will find some
tips for troubleshooting in the following table.
ã=Risk of electric shock!
■Work on the appliance electronics may only be performed by
a specialist.
■Always disconnect the appliance from the power supply
when work is carried out on the electronics. Switch off the
circuit breaker or remove the fuse from your household fuse
box.
$%
$%
'

18
Malfunction table
If a meal doesn't turn out as well as you had hoped, refer to the
section Tested for you in our cooking studio, where you will
find plenty of cooking tips and tricks.
Error messages with E
If an error message beginning with the letter E appears on the
display, press the clock function button Ãrepeatedly until
the KJuand 3symbols appear. Then reset the clock. If the
error is shown again, call the after-sales service.
ã=Risk of electric shock!
■Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our
trained after-sales technicians.
■If the appliance is faulty, switch off the circuit breaker in the
fuse box or disconnect the appliance at the mains. Call the
aftersales service.
You can take remedial action yourself for some error
messages.
Replacing the oven light bulb
It is possible to replace the oven light. Heat-resistant 12 V,
20 W halogen bulbs can be obtained from After-sales Service
or a specialist retailer.
ã=Risk of electric shock!
Never replace the oven light when the appliance is switched on.
Pull out the mains plug or switch off the appliance at the circuit
breaker in the fuse box.
Note: Always remove the new halogen bulb from the packaging
using a dry cloth. This increases the service life of the bulb.
Method
1. Switch off the circuit breaker in the fuse box.
2. Place a tea towel in the cold oven to prevent damage.
Problem Possible cause Remedy/information
The appliance does not work. The plug is not plugged into the mains. Plug in the plug.
Power cut Check whether the kitchen light works.
Defective fuse Look in the fuse box to make sure that the
fuse for the appliance is OK.
Malfunction. Switch off the circuit-breaker for the
appliance in the fuse box, then switch it
back on after approximately 10 seconds.
The two dots and three zeros flash in
the display. Power cut Reset the clock.
The microwave does not switch on. The door was not fully closed. Check whether food remains or foreign
material is trapped in the door.
The ƒbutton has not been pressed. Press the ƒbutton.
The appliance does not heat up to the
temperature which has been set. The ƒbutton was not pressed. Press the ƒbutton.
Microwave operation has been
cancelled for no apparent reason. The microwave has a fault. If this fault occurs repeatedly, please call the after-sales service.
Oven operation without microwave is
possible.
With microwave operation, the food
takes longer to heat up than before. The microwave power setting was too low. Select a higher microwave power setting.
You have placed a larger amount of food than
normal in the appliance. Double the amount = almost double the time.
The food was colder than usual. Stir or turn the food during cooking
The oven does not heat up. “©”
appears in the temperature display
The demo setting is activated. “Demo setting
activated” appears in the text display. Switch off the circuit breaker in the fuse box and switch it on again after
approximately 20 seconds.
“‹‹‹” appears in the temperature
display.
Automatic switch-off has been activated. The
oven stops heating. Press a button or switch off the appliance.
Problem Possible cause Remedy/information
The error message “E101” or “E104”
appears in the clock display. The temperature sensor has failed. Call the aftersales service. Microwave operation is possible on its own.
The “E011” error message is shown in
the display. A button was pressed for too long or has jammed. Press all buttons individually. If the error message remains, please contact the after-
sales service.
The error message “E010”, “E310”,
“E009” or “E309” appears in the display. Technical malfunction. Call the aftersales service.

19
3.Remove the glass cover. To do this, open the glass cover at
the bottom with your hand.
Should you experience difficulties removing the glass cover,
use a spoon to help. (Fig. A).
4.Remove the bulb and replace with a bulb of the same type.
(Fig. B).
5.Refit the glass cover. (Fig. C).
6.Remove the tea towel.
7.Switch the circuit breaker in the fuse box back on or plug in
the mains plug.
Replacing the door seal
If the door seal is defective, it must be replaced. Replacement
seals for your appliance can be obtained from the after-sales
service. Please supply your appliance's E number and FD
number.
ã=Risk of serious damage to health.!
Never use the appliance if the door seal is damaged.
Microwave energy may escape. Do not use the appliance again
until it has been repaired.
1.Open the oven door.
2.Remove the old door seal.
3.There are 5 hooks attached to the door seal. Use these
hooks to attach the new seal to the oven door.
Note: The presence of the join at the bottom of the door seal in
the centre is technically required.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found in the oven. You can make a note of the number of
your appliance and the telephone number of the after-sales
service in the space below to save time should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose
of heating food. Class B states that the appliance is suitable for
private households.
Automatic programmes
The automatic programmes enable you to prepare food very
easily. You select the programme and enter the weight of your
food. The automatic programme makes the optimum setting.
Selecting a programme
Example in picture:
selecting and setting the programme for 0.30 kg of polenta.
$
%
E no. FD no.
After-sales service O
GB 0844 8928989
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
IE 01450 2655

20
1. Pop out the operating mode selector.
The appliance is ready for operation.
2. Press the Xbutton.
The first programme group appears.
3. Select the desired programme group using the operating
mode selector.
4. Press the Âbutton.
The first programme in the programme group appears on the
text display.
5. Turn the operating mode selector until the matching
programme appears.
6. Using the temperature selector, set the weight of the food.
The program length xis shown on the clock display.
7. Press the ƒbutton.
The programme starts.
Note: After starting: press the ±button once. The set values are
shown on the displays.
The programme has ended
A signal sounds. The oven stops heating. Use the operating
mode selector to switch off the oven or select a new operating
mode and make the settings.
Cancelling the programme
Switch off the oven using the „button, turn the operating
mode selector to the Ûposition and push in.
Calling up information
Before starting: Press the button ± briefly. Various information
on the programmes is displayed. For each item of information,
press the ± button again briefly.
Setting a later end time
See the section Electronic clock.
Adjusting individually
If the cooking result of a programme does not meet your
expectations, you can change it the next time.
Make the settings as described in steps 1 to 5.
Press the Âbutton and use the operating mode selector to
move the illuminated square.
- ÙÙÙØÙÙÙ +
To the left = cooking result less well done.
To the right = cooking result more well done.
Start with the ƒbutton.
The cooking time changes.
Defrosting and cooking with the automatic
programmes
Notes
■Take the food out of its packaging and weigh it. If it is not
possible to enter the exact weight, you should round it up or
down.
■Always use microwaveable ovenware, e.g. made of glass,
ceramic or the universal pan. Observe the accessories tips in
the programme table.
■Place the food in the cold cooking compartment.
■A table of suitable types of food with appropriate weight
ranges and the accessories required can be found in the
section after the tips.
■It is not possible to set a weight outside the weight range.
■With many dishes, a signal sounds after a certain time. Turn
or stir the food.
Defrost
Notes
■If possible, freeze and store food flat and in portions at -
18 °C.
■Put the frozen food on shallow tableware, e.g. a glass or
porcelain plate.
Place bread rolls directly on the wire rack.
■Cover thin and protruding parts with small pieces of
aluminium foil. This prevents these parts from cooking
prematurely. Ensure that the aluminium foil does not touch
the walls of the cooking compartment.
■After defrosting, allow the food to defrost for a further 10 to
90 minutes so that it acquires an even temperature.
■Liquid will be produced when defrosting meat, poultry or fish.
Drain off this liquid when you turn the food. Under no
circumstances should it be used for other purposes or be
allowed to come into contact with other foods.
■Place beef, lamb and pork on the ovenware fatty-side down
first.
■Bread should only be defrosted in the required amounts, as it
quickly becomes stale.
■After turning, remove any minced meat that has already
defrosted.
■Whole poultry should be placed in the ovenware breast-side
down and poultry portions skin-side down. Cover legs and
wings with small pieces of aluminium foil.
■For whole fish, cover the tail with aluminium foil, for fish fillets
cover the edges and for fish steaks cover the protruding
ends.
3
'HIURVW
3
HUHDOSURGXFWV
3
HUHDOSURGXFWV
3ROHQWD