Neolt STRONG trim pro 130 User manual

STRONG trim pro
130 / 1800 / 230
USER’S MANUAL
Cod. NLT.QR-C-N-MM-2-1S-GB NEOLT
ENGLISH USOGB-STR_pro.DOC 2002

CONTENTS
STRONG trim PRO
i
NEOLT
❑SECTOR: STRONG TRIM PRO ❑DATE: 19/03/2002
❑VERSION: STR_PRO-01 ❑AUTHOR: POLENI P.
Chapter
1 General Information ................................................................................... 1
1.1 Data of the manual ............................................................................... 1-1
1.2 Users.................................................................................................... 1-1
1.3 Property of information.......................................................................... 1-1
1.4 Conventions.......................................................................................... 1-2
1.4.1 Conventional terms..................................................................... 1-2
1.4.2 Conventional symbols used ........................................................ 1-2
1.5 Identification data of the manufacturer.................................................. 1-3
1.6 Identification data of the machine ......................................................... 1-3
1.7 Warranty............................................................................................... 1-4
1.8 Service ................................................................................................. 1-4
1.9 Use of this manual................................................................................ 1-4
1.10 Description of the machine ................................................................. 1-5
1.10.1 Correct use............................................................................... 1-5
1.10.2 Incorrect use............................................................................. 1-5
1.10.3 Structure of the machine........................................................... 1-6
Chapter 2 Safety Information...................................................................................... 2
2.1 Safety criteria........................................................................................ 2-1
2.2 Qualification of the personnel ............................................................... 2-2
2.3 Protections............................................................................................ 2-2
2.4 Dangerous areas and residual risks...................................................... 2-3
Chapter 3 Characteristics of the machine ................................................................. 3
3.1 Technical specifications........................................................................ 3-1
3.2 Power requirements.............................................................................. 3-1
3.3 List of materials .................................................................................... 3-2
Chapter 4 Installation.................................................................................................. 4
4.1 Qualification of the operator.................................................................. 4-1
4.2 Transport.............................................................................................. 4-1
4.2.1 Transport conditions ................................................................... 4-1
4.2.2 Assessment of damages during transportation............................ 4-2
4.3 Assembling........................................................................................... 4-3
4.4 Adjustment............................................................................................ 4-6
4.5 Storage................................................................................................. 4-7
4.5.1 Characteristics............................................................................ 4-7
4.6 Location................................................................................................ 4-7
4.6.1 Characteristics of the location area............................................. 4-7
4.6.2 Testing........................................................................................ 4-8

CONTENTS
STRONG trim PRO
ii
NEOLT
Chapter 5 Use ............................................................................................................. 5
5.1 Qualification of the operator.................................................................. 5-1
5.1.1 Working place............................................................................. 5-1
5.1.2 Insertion of the media to be cut................................................... 5-1
5.1.3 Characteristics of the media to be cut......................................... 5-2
Chapter 6 Maintenance ............................................................................................... 6
6.1 Routine maintenance............................................................................ 6-1
6.1.1 Qualification of the operator........................................................ 6-1
6.1.2 Procedure................................................................................... 6-1
6.2 Extraordinary maintenance................................................................... 6-1
Chapter 7 Demolition................................................................................................... 7
7.1 Qualification of the operator.................................................................. 7-1
7.2 Deactivation of the machine.................................................................. 7-1
7.2.1 Procedure................................................................................... 7-1
Chapter 8 Attachment list .......................................................................................... 8
Attachment
A Optional reel holder ............................................................................ A
A.1 Assembly of optional reel holder........................................................... A-1
Attachment B Optional sheet-holder bar................................................................... B
B.1 Assembly of optional sheet-holder bar.................................................. B-1
B.2 Feeding the media to cut...................................................................... B-3
Attachment C Optional cutting area lamp.................................................................. C
C.1 Assembly of lamp - optional ................................................................. C-1
Attachment T1 Technical sheet ................................................................... SCH-TEC
T1.1 Replacing rotating BLADES................................................... SCH-TEC-1

GENERAL INFORMATION
STRONG trim PRO
1-1
NEOLT
Data of the manual 1.1
User’s manual. STRONG TRIM PRO
Code of Manual: NTL.QR-C-N-MM-2-1S-GB
Users 1.2
User’s manual.
•Transporter.
•Installer.
•User.
•Maintenance personnel.
•Demolition squad
✔ For further details on the users of this manual, please see Section 2.2 Qualification of the
personnel.
Property of information 1.3
The information contained in this manual is reserved property. All rights are reserved.
This
manual cannot be reproduced or copied, as a whole or in parts, without prior written
consent of NEOLT S.p.A. These documents are provided only for the use of the client
whom the manual has been supplied to with the machine, and can be used only for the
installation, use and maintenance of the machine the manual refers to.
NEOLT S.p.A. states that the information of this manual complies with the technical
and safety requirements of the machine the manual refers to. The manufacturer cannot be
held responsible for any direct or indirect damages to people, objects or pets due to the
use of these documents or of the machine in conditions other than those authorized.
NEOLT S.p.A. reserves the right to change or improve, without prior notice, this manual
(user’s manual) and the machines, and also other machines marketed of the same model
as the one this manual refers to, but with a different serial number. The information of this
manual particularly refers to the machine specified in 1.6 Identification data of the
machine.

GENERAL INFORMATION
STRONG trim PRO
1-2
NEOLT
Conventions 1.4
Conventional terms 1.4.1
Machine: indicates the machine specified in section 1.6 Identification data of the machine.
Frame: structure supporting the machine.
Qualified personnel: people, who thanks to their qualification, preparation and
experience, and thanks to the knowledge of the relevant rules, safety requirements and
service norms, are able to recognize and avoid any possible danger for the people, the
material and the machine.
The description of direction, sense and position (right side of the machine, left side of
the machine) refers to the operator standing in front of the machine.
Conventional symbols 1.4.2
Text in italic: indicates the title of a chapter, a section, a sub-section, a paragraph, a table,
or a figure of this manual or of another related publication.
1 (example of a generic number): symbolic representation of a command or signaling
device.
A (example of generic letter): symbolic representation of a part of the machine.
✔ Notes contain important information, given outside the text to which they refer.
0 The danger symbols indicate those procedures which, if not respected, could cause
physical damages to the operator. The manufacturer cannot be held responsible for any
damages to people due to noncompliance with these norms.
 The warning symbols indicate those procedures which, if not respected, could damage the
machines or the devices connected to it. The manufacturer cannot be held responsible for
any damages to objects due to the noncompliance with these norms.

GENERAL INFORMATION
STRONG trim PRO
1-3
NEOLT
Identification data of the manufacturer 1.5
neolt S.p.A.
Via G. Galilei, 8
24036 Ponte San Pietro (BG) - ITALY
Tel. [phone]
Fax [phone]
http://www.neolt.it
E-mail.: [e-mail]
Identification data of the machine 1.6
Name TRIMMER
Model STrONG TRIM
PRO
Serial number
Year of construction
Neolt ITALY

GENERAL INFORMATION
STRONG trim PRO
1-4
NEOLT
Warranty 1.7
NEOLT S.p.A. warranty covers the machine for one year.
The parts subject to normal wear and tear are not included in the warranty. The warranty
is limited to the substitution or repair of the parts that should result damaged or defected.
The assessment of the defects and causes is carried out
at NEOLT S.p.A. facilities.
The warranty is cancelled if the machine is used incorrectly, or in an improper or
excessive way, if any non-original spare parts are used and for noncompliance with the
norms of this manual.
In no case can the purchaser demand the resolution of the contract, claim for damages or
the extension of the warranty.
✔ NEOLT S.p.A. cannot be held responsible for any negative advertisement, or loss of
earnings, due to technical or mechanical malfunctioning of the product in use or
in display.
Service 1.8
NEOLT S.p.A. provides, on request, assistance for the installation and the
maintenance of the machine.
Use of this manual 1.9
Carefully read the chapters General information, Safety information, Characteristics of the
machine and Operator interface.
✔ Please consult the relative chapter for any transportation, installation, use, maintenance and
demolition operation.
This manual and the attached documentation must be kept for the entire technical life of the
machine in order to consult it quickly when necessary.
If the machine is sold as second-hand, this manual and the attached documentation must be
supplied along with the product.

GENERAL INFORMATION
STRONG trim PRO
1-5
NEOLT
Description of the machine 1.10
Correct use of the machine 1.10.1
This machine can be used only to cut media having the allowed basic weight (max paper
thickness 4,5 mm).
As the machine consists of assemblies physically separated and autonomous, the proper
use of the machine can be identified also in the operation of a single part.
Foreseen modes of use
The installation and the extraordinary maintenance of the machine must be carried out by
qualified personnel only.
The machine has been designed to be used in a site having the following features:
•Protection against atmospheric agents.
•Proper illumination.
•Allowed range of temperature: from 18°C to 35°C.
•Allowed humidity range: from 30 % to 80 %.
Incorrect use of the machine 1.10.2
Any use other than that indicated in Section 1.10.1 Correct use of the machine is to be
considered incorrect, especially:
•Using the machine in ways which differ from those which it has been designed for,
represents an anomalous condition and could therefore damage the structure of the
machine.
•Using the machine without its protections and without the safety equipment.
•The non compliance with the procedures described in this manual, and specially those
concerning maintenance and repairing.
•The use of the machine in a site where fire and explosion risks are present, as the
machine is not provided with explosion proof devices.
•Its use in an explosive environment.
•Its use in an inflammable
environment.

GENERAL INFORMATION
STRONG trim PRO
1-6
NEOLT
Structure of the machine 1.10.3
The machine is composed of the
following parts:
A Work surface
B Support
C Paper collecting drape
D Brackets
E Blade holder carriage
F Sliding bar
Fig. 1.1 Prospect views
Fig. 1. 2 Detail
Fig. 1. 3 Prospect views
A
E
D
C
B
D
F

INFORMATION ON
SAFETY
STRONG trim PRO
2-1
NEOLT
Safety criteria 2.1
During designing and manufacturing of this machine, all criteria and care in order to
satisfy the essential safety requirements foreseen by the relevant rules have been taken
into account.
The accurate evaluation of the risks performed by the manufacturer has allowed to
eliminate most of the risks concerning the usage conditions of the machine, both foreseen
and reasonably foreseeable.
The complete documentation including all the safety norms adopted is in the technical
booklet of the machine, which is deposited at the manufacturer's premises.
The manufacturer recommends strict compliance with the instructions, procedures and
recommendations of this manual and with the laws in force on the safety in the work
place. This also refers to the use of the protection devices foreseen, both those integrated
in the machine and personal.
✔ NEOLT S.p.A. cannot be held responsible for any damages to people, pets or objects due
to noncompliance with the safety rules and the recommendations contained in the
supplied documentation.

INFORMATION ON
SAFETY
STRONG trim PRO
2-2
NEOLT
Personnel qualification 2.2
Stage of the technical life of the machine Qualification of the operator in charge
Transport Qualified transportation
Installation Qualified personnel
Use Qualified personnel
Routine maintenance Qualified personnel
Extraordinary maintenance Engineers authorized by NEOLT S.p.A.
Demolition Qualified personnel
Protections 2.3
✔ NEOLT S.p.A. cannot be held responsible for any damages to people, pets or objects due
to noncompliance with the safety rules and the recommendations contained in
the supplied documentation.
0 Tampering with the protections and the safety devices is dangerous for the people using the
machine and for those exposed to it.
✔ NEOLT S.p.A. cannot be held responsible for any damages to people, animals or objects
due to tampering with the protections.

INFORMATION ON
SAFETY
STRONG trim PRO
2-3
NEOLT
Dangerous area and residual risks 2.4
Any area closed to the machine where a person is exposed to injuries or health risk is to
be considered dangerous.
0 Pay particular attention to your hands
during cutting operations.
During some procedure on this
machine, as specifically indicated in
this manual, there could be residual
risks for the operator. Residual risks
can be prevented by carefully
respecting the procedure indicated in
this manual, and using the indicated
protection devices. Some examples:
• Maintenance and service operations
must be performed only by
engineers authorized by the
manufacturer.
•Pay attention to the warning labels
applied to the trimmer
✔ NEOLT S.p.A. cannot be held responsible for any damages to people, pets or objects due
to noncompliance with the rules or if the prescribed individual protection
equipment is not used (IPE).
Fig. 2. 1 Cutting area

INFORMATION ON
SAFETY
STRONG trim PRO
2-4
NEOLT

CHARACTERISTICS OF
THE MACHINE
STRONG trim PRO
3-1
NEOLT
Technical specifications 3.1
MODEL 130 180 230
Max. cutting thickness (mm) 4,5 4,5 4,5
Usable cutting length (cm) 130 180 230
Length (cm) 174 224 274
Width (cm) 50 50 50
Height (with holder) (cm) 105 105 105
Height of working table (cm) 87 87 87
Trim weight (kg) 14 16 18
Support weight (kg) 20 23 27
Accessories Reel holder
Cutting area lamp
Sheet holder bar
Performances 3.2
❑ Max. cutting thickness 4,5 mm

CHARACTERISTICS OF
THE MACHINE
STRONG trim PRO
3-2
NEOLT
List of material 3.3
strong
TRIM pro
Max. cutting thickness
Material
4,5mm
Drawing paper X
Board X
Cibachrome X
Slides X
Acrylic film X
Hard board X
Hot seal film X
Lead X
Leather X
Lithoplate X
Magnetic vinyl X
Carton X
Paper X
Photographic film X
Photographic paper X
Polypropylene film X
Printing plate X
Polystyrene X
Rubber X
Steel for composite X
Fabrics X
Veneering boards X
Vinyl X
Jute X

INSTALLATION
STRONG trim PRO
4-1
NEOLT
Qualification of the operator 4.1
Transport, installation and connection operations must be performed only by personnel
qualified in transportation and electrical operations.
Transport 4.2
Transport conditions 4.2.1
The trimmer is shipped with a packaging consisting of three cardboards
1 for
components protection, and of a carton box
2 containing all the components. Fig. 5.1
Transport conditions.
The packaging size and its gross weight (trimmer plus packaging) are the following:
MODEL 130 180 230
Size (WxDxH - cm) 213x52x34 263x52x34 370x52x34
Weight (gross) - Kg
0 Please use suitable lifting devices and accessories, complying to the rules in force.
✔ To avoid shocks and turnover, apply the needed care. Protect the machine against external
atmospheric agents.

INSTALLATION
STRONG trim PRO
4-2
NEOLT
Fig. 4.1 Transport conditions
Assessment of damages during transportation 4.2.2
Check the conditions of the machine by visually inspecting it, after having removed it from
the shipping box. Any defects on the visible parts of the machine indicate crashes during
transportation, which could also affect the ordinary operation of the machine.
In general, check screws and bolts for tightness.
1
2

INSTALLATION
STRONG trim PRO
4-3
NEOLT
Assembling 4.3
•Open the packaging box
1 containing all the components (Fig. 4.1 Transport conditions).
•Remove polystyrene protections
2 (Fig. 4.1 Transport conditions).
 For this operation, minimum 4 persons are required.
•Install the support, assembling the lower traverse 3 and the upper one 4 with the
right and left posts, using the provided screws and bushing
5 .
 Attention The shoulder has holes with a different diameter, the side with the bigger hole
must face outward.
•To assemble the stand, screw on the bottom traverse 4 first to one shoulder, then to the
other with the screws and the bushes supplied
5 .
 Attention When you assemble the upper traverse, the central push rod must face upwards
6 . The value set by Neolt is 3 mm.
4
3
5
6

INSTALLATION
STRONG trim PRO
4-4
NEOLT
To assemble the paper collection basket, first slide in the front (lower) 7 and then the
back (high) basket holding rods, and block them in the shoulder with two Benzing rings
per rod
8 , in the proper seats on the rod.
•Slide the square rods in the proper holes
at the two ends of the basket.
•Fix the two rods to the basket holding
rods previously assembled
9 .
•Screw on the two supports for the table in
the front part on the upper traverse using
the supplied screws
10 .
7
9
8
frontback
frontback
10