nested Time to Feed User manual

IMPORTANT:
READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE
Time to Feed
Instruction Manual

Read all instructions before assembly and use of the rocking chair.
Keep instructions for future use.
WARNING:
• Adult assembly required.
• Due to the presence of small parts during assembly, keep out of the reach
of children until assembly is complete.
• Do not sit on the edge of the seat, armrests or on the backrest as this could
cause the chair to tip over.
• Do not use the chair as a step stool.
• Do not leave children unattended on or beside the chair.
• Be aware of risk of open fire and other sources of strong heat, such as
electrical bar fires, gas fires, etc. in the vicinity of the product.
• Dispose of plastic wrapping and keep out of reach of children to avoid
suffocation.
• Do not use the chair if any parts are broken, torn or missing.
• Take care that your child does not climb on the chair, there is a risk of falling
off.
• Ensure all bolts are securely and correctly tightened.
• The maximum weight for this rocking chair is 100kg.
Safety Precautions:
Page 2

Please check that all parts are present before you start the assembly of
your furniture.
Assembly to be carried out by a competent adult only.
During assembly children should be kept away from the product due to
possible risk of injury.
For ease and speed of assembly, we recommend that before you
commence each step of the assembly, that you identify all the parts
required for that step.
For larger items, please ensure that you have sucient space and people
to assemble your product safely.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
For the protection of your furniture, we recommend that the product is
placed on a protected surface during assembly to prevent any damage.
During assembly please take care not to over-tighten any ttings, as this
may damage the product.
Always place the product on a at, steady and stable surface.
Do not stand on the product.
This product is intended for indoor, household use only as it is a
non-industrial product.
Usage of power tools is not recommended for assembling this product.
Please use caution and care when lifting the product to avoid personal
injury and/or damage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Tips before you start
Page 3

A B C D E
F G H
K L M
I J
chair back
x1
chair sides
x2
leg frame rod
(front)
x1
leg frame rod
(rear)
x1
chair arm cushion
x2
seat frame
x1
chair seat cushion
x1
bolt & washer
x2
bolt, washer
& barrel nut
x4
bolt & washer
x2
screw
x4
dowel
x6
allen key
x1
Page 4
Parts:
Check what you have received:
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service.

1. Use 4x bolt (I) and 4x wooden dowel pins (L) to connect chair sides (B)
to support bars (C & D).
Ensure the washer is on bolt (I) before inserting through bolt hole. Tighten
bolt using the barrel nut (I).
To note: The longer support bar (C) is fitted to the front of the chair and the
shorter bar (D) is fitted to the rear. The ends of the support bars are angled,
ensure these are facing the correct way as shown in diagram below.
I
B
D
C
L
Page 5
Assembly

2. Connect the chair backrest (A) to the chair base (F) using
bolts & washers (J).
A
F
J
Page 6
Assembly

3. Insert wooden dowel pins (L) into support bars (C & D). Place the chair
backrest (A) along with cair base (F) onto the support bars (C & D). Using
screw (K) secure the chair base (F) to the supports bars (C & D).
Using bolts (H) secure the chair backrest (A) to the chair sides (B).
H
K
K
H
L
Page 7
Assembly

4. Place armrest cushions (E) with the pockets on the outside of the frame.
5. Fit the seat cushion (G).
Page 8
Assembly