Net World Sports Forza 3 x 2 LOCKING GOAL User manual

NET CLIP
i
Always Inspect goal post and net for defects before use and repair damaged parts in accordance with BS
8461:2005 code of practice.
Do not use goal with faulty parts.
The goal must always be secured to the ground. Weights to be used on hard surfaces, ground anchors
on grass.
Never climb on the net or goal frame. The goal must never be used without the net fitted.
Please adhere to safety instructions at all times.
www.youtube.com/networldsports
WATCH THE VIDEOS
Learn how to assemble your goal and
take your game to the next level.
Additional Information
When the goal is not being used dismantle and store under cover.
This goal conforms with BS8462:2005.
Not suitable for children under 3 years.
It is recommended that the goal is assembled by an adult.
Warranty excludes net.
@NetWorldSports
www.networldsports.com // 1-866-861-9095 // [e-mail]
www.networldsports.co.uk // [phone] // [email protected]
Anchor the goal using the provided U-pegs ensuring posts are upright and
the crossbar is level. The U-pegs fit around the base and push into the
ground to keep the goal steady.
Starting with the top corners, fit the net by wrapping it around the posts and
clipping to the inside using the net clips provided. Attach clips equally along
the length of the net.
9
10
Place the net over the frame. The Net World Sports label indicates the top of
the net, ensure this is at the top of the crossbar. Align the side seams with the
arching tension bars so that the net sits comfortably over the goal.
8
8968
8982
9064
9132
x2
x2
x2
x4
9168
9187
9255
9217
x2
x2
x6
x6
PART NO
QTY
9071
x2
8951
x4
LOCKING
CLIPS
x1 PCK
U-PEGS
NET
CLIPS
NET
x4
x1 PCK
x1
3 x 2 LOCKING GOAL
8951
8951
9071 9217
9217
8951
8951
9071
9217 9217 9255
9255
8982
8982
9255
9255
8968
9132
9255
9064
9217
8968
9255
9132
9132
9168
9187
9064
9168
9187
9132
9217

Lay out all components and ensure that they match the parts list.
1
Insert all Locking Clips into the connectors 9255 & 9217.
2
Assemble the base, attaching parts 8982, 8951 & 9071 to the connectors.
3
4
Fit the crossbar (step 4) to the base (step 3), affixing the 2 x 9064 to
the 2 x 9255.
Assemble both arching tension bars, insert 1 x 9187 into 1 x 9168 then
connect 2 x 9132 to 1 x 9168.
9132 9132
9168
5
6
Lay the goal on its front. Fit the tension bars to the uprights, before returning
the goal to the correct position. Secure the tension bars into the base. The
tension bars will flex, allowing them to be put into place.
7
Assemble the crossbar and the upright section, attaching 9064, 9071, 8968
& 8951 to connectors.
9187
9255
9255
9255
89519071 9217
8982
8982
9255 9217
8951
9255 8951 9217 8951 9255
8968
9217
9064
8968
9217
9064
9217
9071
9217
9255
LOCKING CLIPS