Net World Sports Forza User manual

8 x 5 GAELIC GOAL
Anchor the goal using the provided U-pegs ensuring posts are upright and
the crossbar is level. The U-pegs fit around the base and push into the
ground to keep the goal steady.
Starting with the top corners, fit the net by wrapping it around the posts and
clipping to the inside using the net clips provided. Attach clips equally along
the length of the net.
9
10
Place the net over the frame. The Net World Sports label indicates the top of
the net, ensure this is at the top of the crossbar. Align the side seams with the
arching tension bars so that the net sits comfortably over the goal.
8
9033
8951
9286
9149
x2
x6
x2
x4
9187
9217
9297
x2
9256
x2
9255
LOCKING
CLIPS
x2
x4
x4
x1 PCK
PART NO
QTY
U-PEGS
NET
CLIPS
NET
x2
x1 PCK
x1
9261
x2
i
Always Inspect goal post and net for defects before use and repair damaged parts
in accordance with BS 8461:2005 code of practice.
Do not use goal with faulty parts.
The goal must always be secured to the ground. Weights to be used on hard surfaces,
ground anchors on grass.
Never climb on the net or goal frame. The goal must never be used without the net fitted.
Please adhere to safety instructions at all times.
Please ensure all locking clips are inserted into the connectors.
Additional Information
When the goal is not being used dismantle and store under cover.
This goal conforms with BS8462:2005.
Not suitable for children under 3 years.
It is recommended that the goal is assembled by an adult.
Warranty excludes net.
Please visit the website for more details.
@NetWorldSports
www.networldsports.com // 1-866-861-9095 // [e-mail]
www.networldsports.co.uk // [phone] // [e-mail]
F
O
R
Z
A
F
O
R
Z
A
8951
8951
9256
9255
9255
9033
8951
9217
8951
9255
9033
9286
9217
9261
8951
9256
9217
8951
9261
9217
9286
9255
9149
9187/9297
9149
9149
9297/9187
9149
NET CLIP

Lay out all components and ensure that they match the parts list.
1
Insert all Locking Clips into the connectors 9255, 9217 & 9256.
2
Assemble the base, attaching parts 9033 & 8951 to the connectors.
3
4
Fit the crossbar (step 4) to the base (step 3), affixing the 2 x 9286
to the 2 x 9255.
Assemble both arching tension bars, connecting 2 x 9149 to each end of
9187.
5
6
Lay the goal on its front. Fit the tension bars to the uprights, before returning
the goal to the correct position. Secure the tension bars into the base.
The tension bars will flex, allowing them to be put into place.
7
9255
9255
9255
89518951 9217
9033
Assemble the crossbar and the upright section, attaching 9286, 9261
& 8951 to connectors.
9033
9255
9149 91499187
F
O
R
Z
A
F
O
R
Z
A
9217
9255 LOCKING CLIPS
9256
9256 8951 9217 8951
8951 8951
9256
9261
9217
9286
9261
9217
9286