6foil Manual
Armstrong Foils International Release of Liability
RELEASE OF LIABILITY, CLAIM WAIVER, ASSUMPTION OF RISK
By assembling and/or using this Armstrong product, you agree that you have read and understood the entire Armstrong product
owner manual (a copy of which can be viewed at www.armstrongfoils.com/warranty-and-replacement-policy), including all
instructions and warnings contained in that Manual, prior to using the Armstrong product in any way.
You agree to ensure any additional or subsequent user of your Armstrong product will read and understand this Release of Liability,
Claim Waiver, Assumption of Risk before using any Armstrong product prior to allowing that person to use your Armstrong product.
ASSUMPTION OF RISK
Use of the Armstrong product and any of its components involve certain risks, dangers and hazards that can result in serious personal
injury and death to both the user and to non-user third parties.
In using this Armstrong product, you freely agree to assume and accept any and all known and unknown risks of injury to you and
third parties while using this equipment.
The risks inherent in the use of this product can be greatly reduced by abiding by the warning guidelines listed in the Manual and by
using common sense.
Release and Waiver of Claims in consideration of the sale of the Armstrong product, you unconditionally and irrevocably hereby
agree to the fullest extent permitted by law, as follows:
(a) To waive any and all claims that you have or may have in the future against Armstrong International Limited and all related parties
resulting directly or indirectly from use of the Armstrong product and any of its components.
(b) To release Armstrong International Limited and all related parties from any and all liability for any loss, damage, injury or expense
that you or any users of your Armstrong product may suffer, or that your next of kin may suffer, as a result of the use of the Armstrong
product, due to any cause whatsoever, including negligence or breach of contract on the part of Armstrong International Limited and
all related parties in the design or manufacture of the Armstrong product and any of its components.
INDEMNITY
In further consideration of the sale of the Armstrong product and as a separate obligation, you agree, to the maximum extent
permitted by law, to indemnify Armstrong International Limited and all related parties from and against all claims, proceedings,
liabilities, costs, damages and expenses that they may suffer or incur as a direct or indirect result of
your use of your Armstrong product or the use of your Armstrong product by any third party.
In the event of your death or incapacity, all provisions contained herein shall be effective and binding upon your heirs, next of kin,
executors, administrators, assigns, and representatives. Armstrong International Limited related parties have not made and expressly
deny any oral or written representations other than what are set forth herein.
The Armstrong Warranty
Warranty Claims
All claims must be accompanied with a clear explanation and clear dated photographs of the parts in question. We also require a
dated proof of purchase in the form of an invoice or receipt. Armstrong reserves the right to determine if a product will be covered
under warranty once all the documentation has been received.
Sale items
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges and Shipping
We only exchange items if they are defective. If you have a Warranty claim, please rst send us an email to info@armstrongfoils.
com. We will arrange for the assessment and collection of the item. Where the item is assessed and deemed to be covered under
Warranty, we will cover the shipping costs. Where the item is not deemed to be covered by Warranty, you will be responsible for the
return/exchange shipping costs.
1
2
3
4
5
1: Mast
Our tapered one-piece carbon fibre
masts are ultra solid at the top and
slick through the water down below.
The unique core layup delivers a mast
with smooth consistent reactive flex
which generates sweet handling
response, better stability and flex to
drive you through turns.
2: Hardware
Our mast to board hardware are
the crown jewels of the foil world.
We developed an ultra-strong
and corrosion free mast to board
connection system that takes it to the
next level with titanium bi-directional
washers, titanium t-nuts and our own
torx head stainless steel 316L screws.
3: Stabiliser
Designed to harmonise with our front
foils. The angle of the stabiliser can be
adjusted with our Polycarbonate Pro
Shims (PPS), allowing you to tune your
set up to your personal preference.
Construction consists of a foam core
wrapped with high quality carbon
to keep it light and rigid. Titanium
screw inserts are in keeping with our
philosophy of zero corrosion materials
throughout.
4: Fuselage
The Armstrong TC fuselage is a
ground breaking work of art in
terms of engineering and design.
The fuselage has a solid titanium
core running throughout its length,
and all screws tap into this core for
strength and a corrosion free ride.
5: Front foils
Our foils are shaped and refined
to deliver that sublime Armstrong
feeling. The foil sections have
been carefully refined by one of
the world’s foremost sport wing
designers. Construction is based
around a high-density foam core,
wrapped with 100% IM and high
modulus carbon fibre.
Better by Design.
LIABILITY:
WARRANTY:
