NetComm Wireless 3G27WV-02 Instruction Manual

3G27WV-02 –21Mbps Mobile Broadband
Router with Voice
Firmware Release Notes

2
NetComm Wireless 3G27WV-02 Firmware Release Notes
www.netcommwireless.com
Copyright
Copyright© 2014 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Note: This document is subject to change without notice.
This document covers the following products:
NetComm Wireless 3G27WV-02
DOCUMENT VERSION
DATE
1.0 - Initial document release
24/10/2014
Table 1 - Document Revision History

www.netcommwireless.com
NetComm Wireless 3G27WV-02 Firmware Release Notes
3
Firmware Details
ITEM
DESCRIPTION
Model
3G27WV-02
Product Name
21Mbps Mobile Broadband Router with Voice
Date
October 24, 2014
Firmware Version
1.2.44.14
Official / Beta Firmware
Official
File Name
ntc_3g27wv_1.2.44.14.dat
File Size
6.14MB
MD5 Checksum
11e243d1f37f18c00ffd6f18cc154b78
Firmware Upgrade Instructions
1. Connect the supplied RJ45 Ethernet cable from the LAN port of the device to your computer.
2. Connect the supplied power adapter to your router and press the on/off button to power the router on.
3. Allow 60 –90 seconds for the 3G27WV-02 to power up.
4. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type http://192.168.20.1 into the address bar and
press Enter.
5. At the login screen, type admin into both the Username and the Password fields and click OK.
6. Select Administration and then Update Firmware from the menu at the top of the screen. Select Browse / Choose File to
locate and load the firmware (ntc_3g27wv_1.2.44.14.dat)
7. Click Apply to proceed. The process will take a few minutes until the router reboots itself.
8. When the upgrade is done, the Status page is displayed. Ensure that the current firmware is 1.2.44.14.

4
NetComm Wireless 3G27WV-02 Firmware Release Notes
www.netcommwireless.com
9. Using the menu at the top of the screen, select Administration then Settings Manager. Select the Load Default button to
reset the device.
Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly.

www.netcommwireless.com
NetComm Wireless 3G27WV-02 Firmware Release Notes
5
Version History
1.2.44.14
New Features
Added more network bands to Band Settings
Bug Fixes
Re-applied echo cancellation
Updated the Default Time to AU
Updated the Default APN list to AU
Updated WiFi Country code to AU
Updated the dial tone profile to AU dial tone
Fixed the issue where SNMP MIB cannot be downloaded
Fixed compatibility issue with Internet Explorer 11
Fixed the issue where changing the hostname via GUI caused user interface to lock up
Applied cosmetic fixes to the Web GUI
Known Issues
None
1.2.44.1
New Features
None
Bug Fixes
None
Known Issues
None