NETGEAR Nighthawk AX8 Series User manual

Quick Start
1
On your mobile phone, download
the Nighthawk app and follow the
setup instructions.
Tap the Security icon in your
Nighthawk app to verify that
NETGEAR Armor is activated.
Check out everything you can do
on the Nighthawk app! Pause the
Internet, run a speed test, set smart
parental controls, and more.
2
Secure your
devices with
NETGEAR Armor™
3
Do more with the
app
Your Nighthawk comes with
NETGEAR Armor cybersecurity.
Armor blocks online threats like
hackers and phishing attempts on
your devices.
Download the
Nighthawk app to
install your router

Contents Overview
Troubleshooting
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity,
visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
June 2020
Router
Ethernet Cable
Power Adapter
(varies by region)
1
Power LED
6
WiFi LED
A
WiFi On/Off button
F
USB 3.0 port 1
2
Internet LED
7
WPS LED
B
WPS button
G
Ethernet ports 1–5
3
Ethernet ports 1–5 LEDs
C
LED On/Off switch
H
Internet port
4
USB 3.0 port 1 LED
D
Reset button
I
Power On/Off button
5
USB 3.0 port 2 LED
E
USB 3.0 port 2
J
Power connector
If you’re having problems with the installation, try one of the following:
• Turn off your modem and router and disconnect them. Reboot your
modem. Reconnect your router to your modem, and try installing with the
Nighthawk app again.
• If you’re still unable to install your router using the Nighthawk app,
manually install it using the router web interface.
Visit http://www.routerlogin.net to access the router web interface.
For more information, visit netgear.com/routerhelp.
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Support and Community
Regulatory and Legal
23
15
6
4
7
B
A
I
J
D
CG
F
E
H