NetView HNPW719 User manual

USER
MANUAL
User Manual
19” High Brightness LCD 1000 cd/m²
HNPW719
Rackmount Display Panel
Options :
- SDI / MCS
- AV / HDMI / Audio
- Touchscreen / DC power
- MIL-type or lockable connector

Contents
< Part. 1 > HNPW719
1.1 Package Content P.1
1.2 Structure Diagram & Dimension P.1 - 2
1.3 Installation P.3
< Part. 2 > Specifications / OSD / Remote Controller
2.1 Product Specifications P.4 - 5
2.2 On-screen Display Operation ( OSD ) P.6 - 7
< Part. 3 > Options
3.1 3G / HD / SD-SDI Broadcast-grade input P.8
3.2 MCS Multi-display control solution P.9
3.3 AV2.2D Upgrade : DVI-D + VGA + BNC + S-Video + Audio P.10
3.4 AV2.2H Upgrade : HDMI + VGA + BNC + S-Video + Audio P.10
3.5 AV3.0 Upgrade :P.11DVI-D + VGA + HDMI + BNC + S-Video + Audio
3.6 HW19” Touchscreen : Resistive, Capacitive P.12
3.7 48V, 24V or 12VDC power P.13
3.8 MIL-type or lockable connector P.14
User Manual

Before Installation
■It is very important to mount the equipment in asuitable cabinet or on astable surface.
■Make sure the place has agood ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1 Disconnect the power cord.
2 Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1 Disconnect the power cord.
2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth fi rst, not directly on the parts you are cleaning.
3 Gently wipe the surface. Use as little pressure as possible.
4 Wait until your monitor is completely dry before plugging it in and powering it up.
User Manual

<Part 1 >
< 1.1 > Package Content
HNPW719 unit X 1
- 6ft VGA cable X 1
- Power adapter X 1
- Power cord X 1
< 1.2 > Structure Diagram
1
P.1
User Manual

< 1.2 > Dimension
P. 2
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
HNPW719 480 x 58 x 310 mm
18.9 x 2.3 x 12.2 inch
529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
4.5 kg
9.9 lbs
6 kg
13.2 lbs
User Manual

< 1.3 > Installation HNPW719
Step 1
■Mount the display panel with M6 screw set.
■M6 screw x4pcs required (Left &right side
).
M6 screw sets are not provided.
Step 2
■Fix the LCD into the rack.
P. 3
User Manual

< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
Panel Size ( diagonal ) 19-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1440 x 900
Brightness ( typ. ) 1000
Contrast Ratio ( typ. ) 1000:1
Color 16.7 M
Viewing Angle ( L/R/U/D ) 80/80/80/80
Response Time ( ms ) 5
Dot pitch ( mm ) 0.2835
Display Area ( mm ) 408.24H x 255.15V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
Video
Connectivity
Digital HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio
Connectivity
Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kQ / 750mV
Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kQ / 2.8V
Speaker Output Power 2 x 2W
*When the audio output is connected, speaker output is OFF
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen display ON 35W or less
Power saving mode 4W or less
Power button OFF 1W or less
P. 4
Power
Safety Approval cUL, FCC & CE, RoHS

HNPW719
Environmental
Conditions
Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Physical
Specifi cation
Product ( W x D x H ) 480 x 58 x 310 mm
18.9 x 2.3 x 12.2 inch
Packing ( W x D x H ) 529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
Net Weight 4.5 kgs / 9.9 lbs
Gross Weight 6 kgs / 13.2 lbs
Applicable
Format
DVI-D / VGA Input PC Signal 1440 x 900 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 5
User Manual

< 2.2 > On-screen Display Operation ( OSD )
P. 6
User Manual

< 2.2 > On-screen Display Operation ( OSD ) HNPW719
P. 7
User Manual

<Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
ITech’ SDI input is an ideal solution for the broadcast-grade
video and high resolution CCTV market.
Designed for use with NetView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, ITech provides a SDI
input module without using additional space or power and it
comes standard with a 2-year warranty.
For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC and audio inputs.
P. 8
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Video
Format
3G-SDI 1080p @60 / 50Hz,
4:2:2 1080p @30 / 25 / 24Hz,
4:4:4 1080i @60 / 50Hz,
4:4:4 720p @60 / 50Hz, 4:4:4
HD-SDI 1080p @30 / 25 / 24Hz,
4:2:2 1080i @60 / 50Hz,
4:2:2 720p @60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Compatible Audio
Format
3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asynchronized
Video
Max. Transmission
Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
User Manual

< 3.2 > Options : MCS
( Multi-display Control )
HNPW719
More control is always good. Especially when it is necessary and
easy. ITech provides MCS solution to control the OSD of various
NetView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and the
fi rst display via a 15 feet serial cable while the CAN bus is used for the
various LCD displays cascade together via CAT 5/6 cable, and daisy
chain up to 1,000 meters.
Designed for use with NetView LCD displays, ITech provides a MCS
input module without using additional space or power and it comes
standard with a 2-year warranty.
P.9
For MCS option, casing depth will be changed.
User Manual

< 3.3 > AV2.2D Upgrade Options :
- DVI-D (DVI-D TMDS single link )
- AV (S-Video +Composite, BNC )
- Audio (3.5mm audio jacks for audio in &out, and 2W +2W speakers )
< 3.4 > AV2.2H Upgrade Options :
- HDMI (HDMI 1.1, CEA-861-D )
- AV (S-Video +Composite, BNC )
- Audio (3.5mm audio jacks for audio in &out, and 2W +2W speakers )
P.10
User Manual

< 3.5 > AV3.0 Upgrade Options : HNPW719
HDMI (HDMI 1.1, CEA-861-D )
DVI-D (DVI-D TMDS single link )
AV (S-Video +Composite, BNC )
Audio (3.5mm audio jacks for audio in &out, and 2W +2W speakers )
P.11
User Manual

< 3.6 > Options : Touchscreen & driver
HW19" USB Touchscreen Specification
Model
Technology
Touch Point
Method
Activation Force
Durability
Response Time
Optical Transmittance
Surface Hardness
Haze
Glass
Connector
Compatibility
TRB e-Resistive TCB e-Capacitive
5-Wire Resistive Capacitive
Single Single
Stylus or Finger Finger
< 50g / Stylus=R0.8 < 50g
35 million touches 300 million touches
15 ms 20 ms
80% ± 3% 87% ±2%
3H 9H
8% ± 3% 7%
3.2 ±0.2 mm 2.8 mm ±10%
USB Type A
Windows 7 / XP / Vista, Linux
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
P.12
User Manual

< 3.7 > Options : DC Power HNPW719
Model 24V 48V
Input rating
Input voltage: 24-Volt 48-Volt
Input range: 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA
- Full load 4880 mA 2442 mA
Output rating
Output voltage: 12-Volt 12-Volt
Output current: 8.3A 8.3A
Effi ciency 85% 86%
P.13
User Manual

< 3.8 > Options : MIL-type or Lockable Connector
Input Part no. MIL Standard
MIL - type
Connector
DC Power ***
( Male )
MS3470W8-33P MIL - DTL - 26482
VGA ***
( Male )
MS3470W14-15P MIL - DTL - 26482
There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most design
fl exibility possible. For more information, please contact us.
Input Standard Part no.
Lockable
Connector
DC Power
( Male )
YM-Ext-461CP001 D-type 3W3
USB LUSB-A111-00 -
MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
P.14
i-Tech Company LLC
TOLL FREE: [phone]
EMAIL: [e-mail]
WEB: www.iTechLCD.com
User Manual