Network Technologies Incorporated ST-C64K9GB-R-HDBT User manual

ST-C64K9GB-R-HDBT
HDMI over CAT5e/6/7 Receiver
Operation Manual
Operation Manual

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting it.
Please keep the following in mind as you unpack and install this
equipment:
•Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
•To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.

CONTENTS
1. Introduction............................................1
2. Applications...........................................1
3. Package Contents ................................1
4. System Requirements............................1
5. Features..................................................2
6. Operation Controls and Functions....... 3
6.1Receiver Front and Rear Panels.....3
6.2IR Cable Pin Assignment..................4
6.3 RS-232 Cable Pin Definitions............4
7. Connection Diagram ............................5
8. Specications ........................................6
9. Acronyms...............................................7

1
1. INTRODUCTION
The HDMI over CAT5e/6/7 Receiver set can receive uncompressed
video/audio and IP data over an single run of CAT5e/6/7 cable up to
100 meters. It has the added benefit of control through the built-in
RS-232 pass-through and 2-way IR control and a LAN serving
connection. Additionally, it has Power over Cable (PoC) functionality
that allows for greater flexibility in installations.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1×HDMI over CAT5e/6/7 Receiver
• 1×IR Blaster (Accessory for Receiver)
• 1×IR Extender (Accessory for Receiver)
4. SYSTEM REQUIREMENTS
-HDMI source device such as a DVD/Blu-ray player -HDMI
equipped display (TV or monitor).
-SM-8X8-C64KR-POE-HDBT 4K HDMI Matrix over HDBT or
-ST-C64K-HDBT-L8-R Multiple HDMI Extender Over HDBase-T

2
5. FEATURES
• HDMI (with 3D format and 4K2K resolution support), HDCP and DVI
compliant
• Supports CEC bypass function
• Simultaneous transmission of uncompressed video/audio and data
over a single CAT5e/6 cable up to 100m/328ft
• Supports uncompressed video up to 4K2K resolution
(3840×2160@30 Hz or 4096×2160@24 Hz)
• Supports pass-through of high-denition audio formats: LPCM 7.1CH,
Dolby TrueHD and DTS-HD Mater Audio
• HDBaseT™ convergence: uncompressed high-denition Video and
Audio, LAN serving, Power over Cable (PoC) and IR/RS-232 Control
pass-through
• Installation friendly
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specication.
2. The PoC function is designed for powering compatible receiver units
only—non-PoC receivers will need their own power supply.Receivers
of another brand may not be compatible.
3. For playback of 4K2K HDMI source signals, a 4K2K capable display
and High Speed HDMI cables are required.

3
6.1Receiver Front and Rear Panels
RS-232 Out
LAN
HDMI Out
CAT5e/6 to HDMI with LAN/IR/RS232
Receiver
Front
2 31
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
Rear
4 5 6 7 8
1HDMI Out: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
2LAN: Connect to a PC or Laptop to the Internet or network
connection.
3RS-232 Out: Connect to the device that is to be controlled (via
D-sub 9-pin female cable) by RS-232 commands.
4Power LED: This blue LED will illuminate when the receiver is
receiving a power supply via PoC from a compatible transmitter
unit.
5IR2 Blaster: Connect to the IR Blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled.
6IR1 Extender: Connect to the IR Extender cable for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR extender.
7Link LED: The yellow LED will illuminate when both the input and
output signals are connected.
8CAT5e/6 In: Connect to the transmitter unit with an single CAT5e/6
cable for transmission of all data signals.
6. Operation Controls

4
6.2IR Cable Pin Assignment
3
1
2
3
2
1
IR Blaster Power
IR Signal
NC
IR Signal
Power
Grounding
IR Extender
6.3 RS-232 Cable Pin Definitions
PIN ASSIGNMENT
1N/C
2 RxD
3TxD
4N/C
5GND
6N/C
7N/C
8N/C
9N/C

ST-C64K9GB-R-HDBT
(SM-8X8-C64KR-HDBT-POE)

6
8. SPECIFICATIONS
Video Bandwidth 300 MHz/9 Gbps
Ethernet Speed 100Mbps
Input Ports 1×CAT5e/6/7, 1×IR Extender
Output Ports 1×HDMI, 1×LAN, 1× IR Blaster, 1×RS-232
HDMI Cable Distances Up to 10 meters
CAT6 Cable Distances Up to 100 meters
HDMI Resolutions 480i~1080p@50/60, 1080p@24, 4K2K
(3840×2160@30/4096×2160@24) &
VGA~WUXGA
IR Frequency 30~50 kHz
UL certied)
ESD Protection Human Body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions 102mm(W)×107mm(D)×25mm(H)
Weight
Chassis Material
Silkscreen Color
256g
Aluminum
Silver
Operating Temperature 0°C~40°C / 32°F~104°F
Storage Temperature −20°C~60°C / −4°F~140°F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 13W

7
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5e Category 5 Cable
CAT6 Category 6 Cable
CAT7 Category 7 Cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital Content Protection
HDMI High Denition Multimedia Interface
IR Infrared
PoC Power over Cable
NTI MAN320 REV 9/27/18