New Age WorktopSide Support Bracket Instruction Manual

1
Installing Worktop
Side Support Bracket
X2
Fasten nuts, bolts, and lock washers.
2
Tighten nuts & bolts.
Parts Needed.
4
3
5
Align bracket.
Level bracket and ensure it is at the
same height as the base cabinet.
1Open locker and locate holes on either side.
2 X Lock Nut
(1/4”)
6 X Washer
(1/4”)
2 X Hex Bolt
(1/4” x 5/8”)
2 X Wood Screw
(#8 x 5/8”)
Thank you for purchasing a NewAge Product!
Please give us a call or visit online if you have any questions.
Call 1.877.306.8930; for UK 0800.031.4069; e-mail at [e-mail]

2
Mounting the Worktop (On 2 Cabinets)
1
Optional: For locker support bracket.
X4 X2
X2 X2
Locate 2 punch holes both sides.
2
Drill into the worktop using the #8 x 5/8” wood screws.
X2
Use 2 washers & #8 x 5/8” wood screws.
Provided in the locker packaging.
Place Worktop on cabinets.
3
I

3
A
B
Slide in corner and attach
remaining cabinets.
Installing Corner Cabinet
(Requires 2 support bracket kits)
Attach top to one cabinet using 1/4” x
5/8 hex bolts, nuts, and washers. Attach second cabinet to top.
23
4
1
6”
or
4”
6”
or
4”
On adjacent edges attach 2 support brackets to underside
of corner top using the supplied (4) #8 x 5/8”screws.
PRO SERIES For mounting top ush with
back of cabinet measure 6”in from corner,
for mounting top ush with front of cabinet
measure 4”in from corner and ush with edge.
BOLD SERIES For mounting top ush with
back of cabinet follow step A, for mounting top
ush with front follow step B and ush with
edge step C.
Note: Ensure there is enough
assembly room. Cabinets
must be assembled away
from corner to access backs
of cabinets.
1
1 2 3
2
3C