Newgy Industries Robo-Pong 3050XL User manual

www.newgy.com
QUICK START GUIDE
TROUBLESHOOTING
CONTACT US
WARRANTY INFO
CONTACT US
Newgy Industries, Inc.
Tennessee, USA
800-556-3949
615-452-6470
[e-mail]
www.newgy.com
© Newgy Industries, Inc., 2018 All rights reserved.
LIMITED 1 YEAR WARRANTY*
Manufacturer warrants to the original retail
purchaser this product to be free from defects
in material and workmanship for a period of 1
year from date of purchase.
Should this product become defective due to
material or workmanship during the warranty
period, contact our Customer Service
Department describing the defect. Always
provide your serial number. We will provide
you with return authorization and shipping
instructions. If you are asked to return the
product, pack it securely and ship it PREPAID.
If defective as provided by the terms of this
warranty, we will, at our option, repair or
replace the product and return it prepaid to a
Contiguous U.S. address (other areas carry a
shipping charge).
This warranty is not transferable and does not
cover normal wear and tear, or damage caused
by improper handling, installation, or use. This
warranty is void if the product is in any way
abused, damaged, or modified from its original
state.
This warranty gives you specific legal rights,
and you may have other rights that may vary
from state to state.
*Warranty and service valid only in territory of
original sale.
For questions or troubleshooting, refer to this robot’s Owner’s Manual at www.newgy.com.
V2

Attach the Robot to the Table
Pick up the robot by the center base
and secure it to the table by angling
it downward and against the table.
The support legs should be as wide as
possible before they go underneath the
table and the front support triangle sits
on top of the table.
Preparing the Mounting Bracket
Place the robot on the table with the
open front side facing you. Gently lift
the robot’s head and pull the mounting
bracket towards you. Using the rubber
tip packet - select and install the correct
rubber tips for the thickness of your table
so the trays stay level.
Attach the Side Nets
Attach the side nets to your table tennis
table net by slipping the red flexible
band over your table net support base
and looping it over the table net clamp
screw.
Attach the Device Holder to Table
The included Device Holder is for your
convenience to safely hold your smart
phone or tablet while playing and be
within easy reach to adjust settings in
the App. It is optional to use. To install,
use the holder knob to attach the
bracket to the Device Holder. Then slide
the bracket under the table and adjust
the bracket knob until it secures tightly
to the table. This will function vertically
or horizontally.
Lift the Back Net Tubes
Turn the robot around 180° so the net
support tubes are now facing you. Grasp
the second tube from your right and pull
up, removing it from its storage hole.
Place the bottom of this tube into the
top of the first tube on your right as
shown. Repeat on the left side.
Pour in the Balls
Make sure that you use only recommended
balls for the Newgy Robo-Pong 3050XL
– Newgy Robo-Ball 2-Star 40+mm, or any
ITTF-approved 2 or 3 star 40+mm balls.
Do not mix 40+mm balls with other size
balls. Extra Robo-Balls can be purchased
at www.newgy.com.
Lower the Ball Trays
Grasp one of the ball return trays and lift
straight up to unlock it. Now grasp the
adjacent net support tube, and slowly
lower it into position. Be careful not to
let the tray or support tube slam down.
Repeat on the other side.
1
4
3
6 9
7
2
5
QUICK START
Plug-In the Robot
Plug the black power cable into the
back of your robot.
You are now ready to begin using your
Newgy Robo-Pong 3050XL robot!
8
10
11
Download the Newgy APP
Using your own personal
electronic device (ie: tablet,
smartphone or laptop), download
and the Newgy APP.
Connecting your Robo-Pong
3050XL to the Newgy APP
iOS Users
1) Go to your Settings to turn on your
Bluetooth® feature on your device.
2) Launch the Newgy APP.
3) Press the “Play” button
4) Select your robot (ie: NWGYC441).
5) Press “Pair” in pop-up window.
(This step is only neccessary on
initial set-up.)
6) There will be an automatic calibration
process that your 3050XL will
automatically execute. This will take
approximately 30 seconds while
connecting to your 3050XL.
7) You will be notified that your connection
is successful.
Android Users
1) Go to your Settings to turn on your
Bluetooth® feature on your device.
2) Within your Bluetooth® settings, under
Available Devices, select your robot
(ie: NWGYC441).
3) Launch the Newgy APP.
4) Press the “Play” button
5) You will be notified that your connection
is successful.
Verify All Parts
First, unpack your robot and all parts
from the box and verify that everything
is present. If a part is missing,
please contact Newgy immediately
(see back page for contact info).
• Robot
• Balls (U.S. Only)
• Rubber Tips
• Plastic Clips
• Transformer
• Device Holder
• Pong-Pal (U.S. Only)
• Tell-A-Friend/Warranty
Flyer (U.S. Only)
• Quick Start Guide