Newport Brass 106C User manual

INS ALLA ION INS RUC IONS
COLD WA ER DISPENSER
Model No’s:
106C, 107C, 108C, 1030-5623,
2470-5623, 1200-5623, 2940-5623, 2500-5623,
3170-5623, 3200-5623, 3210-5623,
3160-5623, 3180-5623, 3190-5623
Congratulations on the purchase
of your Brasstech product,
an excellent choice, that will give you
years of quality service and enhance
the look and style of your home.
106C

Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the
use of clear silicone sealing materials. ecommended deck thru hole Ø 1.25" to Ø1.38
INS ALLING FAUCE ON SINK (See Fig 1)
· Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.
· Slide gasket and mounting cresent over mounting stud on underside of mounting surface and secure into place
with mounting nut.
Figure 1
Mounting nut
Mounting
Crescent
ubber gasket
O-ring
Escutcheon
Mounting surface
& hole
NWP-106C ev B

A ACHING WA ER SUPPLY CONNEC ION (See Fig 2)
· Slide the 1/4” OD supply tube (not included) through compression nut and compression
sleeve. Place insert into end of tube.
· Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet.
3. ES INS ALLED FAUCE
· With handle in OFF position, turn on water supplies and check all connections for leaks.
Figure 2
Connect to
water supply
(not included)
1/4” OD Tubing
(not included)
Compression
nut
Compression
sleeve
Insert
Faucet inlet
2001 CA NEGIE AVE, SANTA ANA CA 92705
[phone]
WWW.NEWPO TB ASS.COM
NWP-106C ev B
EN-3411
09/27/17