Nexigo PS5 Wall Mount with Dual Charging Station User manual

PS5 Wall Mount with Dual
Charging Station
User Manual Installation Video
User Manual-P5133

WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo PS5 Wall Mount with Dual
Charging Station! You are now part of an exclusive club: the
NexiGo family! It's our job to make sure you enjoy your
membership. If you have any problems please contact us at
[e-mail] at any time for further assistance. This product
is covered by our industry leading 1-year manufacturers
warranty. Make sure to register your purchase at
nexigo.com/warranty within 14 days of the delivery date to
extend your warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome you again
to the family. We thank you deeply for your trust and for your
business. We know you'll love it here. We look forward to
serving you again in the near future.
Yours Sincerely,
The NexiGo Team
CONTACT INFORMATION
Website: www.nexigo.com
Manufacturer: Nexight INC
E-mail: [e-mail]
Tel: [phone]
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
11

PRODUCT INTRODUCTION
This PS5 Wall Mount with Dual Charging Station is designed
to organize your PS5 console and can support both Digital
and Disc versions. The wall mount is equipped with a
5V 2A power adapter to provide faster charging. The LED
indicators on the charging station will provide an easy-to-read
status on your controller's charging status, displaying an
orange light when they are charging and a blue light when
they are fully charged.
PRODUCT DETAILS
12
2
3
7
6
554
2

1. Charging Slot 1
2. LED Indicator
3. Type-C Power Interface
4. Power Button
5. Charging Dock
6. Charging Slot 2
7. Wall Mount
PRODUCT INSTRUCTIONS
1
1a
1b
Step 1: Align one of the U-shaped spacers with the holes on
the base of the wall mount. Insert a screw through one of
the holes in the U-shaped spacer and fasten it with a washer
on the other side. Repeat this process with the other screw,
and then repeat the process with the other U-shaped spacer.
Ensure that both U-shaped spacers are installed before
moving on to Step 2.
3

2
Step 2: Position the stand where you want it and then locate
the screw holes in the wall mount. Mark each hole with a
pencil/pen to ensure that the tapping process will be accurate.
3
Step 3: Drill a hole with 15/64" drill bit at each mark.
(Drill and drill bits NOTincluded.)
15/64" drill bit
4

5
Step 4: Insert a plastic wall plug into each hole and hammer
in the plastic wall plugs so they are nearly flush with the wall
surface. (Hammer NOT included.)
Step 5: Insert a screw through the hole in the wall mount
and into the plastic wall plug, then do the same with the
rest holes in the wall mount. Tighten screws snugly, being
careful not to overtorque or strip the screw heads.
4
5

Step 6: Place your PS5 console on the wall mount and align its
safety lock screw hole with the opening on the bottom of
the mount. There are two openings for the screw placement,
one for each version of the console. Once you have aligned
the PS5 screw hole with the opening on the bottom of the
mount, insert the safety screw and tighten it.
Step 7: Place the charging dock in the slot in front of the PS5
console. You can power the charging dock with either the
provided USB cable or power adapter.
6
Disc EditionDigital Edition
Bottom
7
6

FEATURES
An intelligent microchip within the charger protects the
controllers from damage and displays an easy-to-read
charging status.
Can charge two PS5 controllers simultaneously.
The LED charge indicator light displays an orange hue while
charging a connected controller. This indicator changes to a
blue light when the controller is fully charged.
Minimalistic aesthetic for convenience and adaptability.
Step 8: Tap the power button to toggle on/off the charging
dock (Note: Please ensure that the power button is turned on
and lit up before charging. The controllers will not charge if
it is off.)
8
7

SPECIFICATIONS
Input: DC 5V 2A
Output: DC 5V 1.5A
Charging Time: ~2.5 Hours
LED Indicator: Orange (Charging), Blue (Fully Charged)
Product Size: 10.16 X 1.97 X 2.28 Inches
CHARGING INSTRUCTIONS
Power the charging dock with either the provided USB cable
or the provided power adapter.
A white power indicator light will display in the lower left
hand corner of the dock next to the power button when the
dock is on. Tap the power button to power on the charging
dock. This will cause the logo at the center to illuminate and
will cause both charging indicators to flash orange and blue.
Note: The power button is a touch controlled button and can
be toggled on/off with a simple tap.
WHAT'S IN THE BOX?
1 X PS5 Controller Charging Dock
2 x U-Shaped Spacers
1 X Screwdriver
1 X USB Cable
1 X PS5 Wall Mount
1 X Screws Bag
1 X User Manual
1 X Adapter
8

FCC REQUIREMENT
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
SAFETY WARNING: HAZARD-Small Parts-Not intended for
children under 5 years of age.
Power the charging dock with either the provided USB cable
or the provided power adapter. Other Type-C power supplies
may cause charging failure or extended charging duration.
To ensure longevity and lifespan of the wall mount do not
place any objects other than the console or accessories on
the wall mount. Keep this product dry.
This product cannot be used and/or stored in high humidity
conditions.
When this unit is not in use or when docked controllers are
fully charged, it is recommended that you unplug it from
the power source.
NOTES
9