NextBase TV700F ATV - SCAN FUNCTION ILLUSTRATION User manual

1. Shift the switch on the left side of sample to ATV mode;
2.Connect the ATV antenna to sample and power on;
3.Press the menu key on the remote control, goto "MAIN MENU" ;
4. Select "color" to change the TV system to " PAL NTSC(SECAM)"
according to signal style;
5.Go back to "AUTO SCAN", press "enter" to scan;
TV700F ATV scan function illustration
DongGuan Simon Technology Co.,Ltd.
MENU
key
PDF Creator - PDF4Free v2.0 http://www.pdf4free.com

6.Enter into scanning, screen shows "SCANNING";
7. After receiving the signal, it will show channal number after "CHANNEL FOUND";
Remark: 1. Samples scan the signal in step-further way, and the step is 50KHz;
2.Samples's scan frequency range: from 40.5MHz to 870.5MHz.
Prepared By:JianQuan Liang. Approved By:JuHua Wu
PDF Creator - PDF4Free v2.0 http://www.pdf4free.com