
nightlife.com.au
For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: +800 7777 7733 | INT: +61 7 3858 2581
EQUIPMENT LIST
A. 10" Chromebase Kiosk
B. 3m Ethernet cable
C. Power supply consisting of '1x IEC C5
cloverleaf power cable' and '1x 12v
adaptor'
D. 115mm(sq) Alloy adaptor plate
E. M4x5 Philips head screws
F. Desk Stand
G. Adhesive cable tie mounts
H. M4x8 Philips head screws
MOUNTING THE KIOSK ONTO THE DESK STAND
Remove the IO cover on
the rear of the kiosk (A)
and connect the 12v power
cable (C) and the ethernet
cable (B) into the their
ports. Replace the IO cover
and use the folding tabs to
manage the cables.
The cables can be held
in place by using the
adhesive cable tie mounts
(G). The power pack (C) can
be held in place with the
velco strip adhered to the
power pack.
Attach the desk stand
(F) to the kiosk assembly
using the 4 Philips heads
screws (H).
Install the alloy adaptor
plate (D) to the kiosk back
using the 4 Philips heads
screws (E). Ensure the
adaptor plate has the
screws holes in a portrait
orientation with the
counterbores facing out.
CB
D
A
H
G
E
F
D
E
F
H
C B
A
G
C
NEED ASSISTANCE?
Nightlife’s crowdDJ® Kiosks are a great addition to any venue. For any questions about the installation or
positioning of your desk mounted Kiosk, your Relationship Manager will be available to help.