Nikkei ND210H User manual

USER MANUAL
NIKKEI ND210H DVD Player
THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.
DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.
STANDBY
ND210H

1
MPORTANT SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is
operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING -Unplug this product from the wall outlet before cleaning, Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. WATER AND MOISTURE -Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink , or laundry tub; in a wet basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this product on an unstable cart, stand tripod, bracket, or table.The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by ǃthe manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer's instructions, and should use a mounting accessory recommended
by the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
OPERATING INSTRUCTIONS
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENTION CORD, RECEPTACLE, OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSTERTED
TO PREVENT BLADE EXPOSURE.
PLEASE READ THIS BEFORE OPERATING THIS UNIT.
The lightning flash
and arrowhead
within the triangle
is a warning sign
alerting you of
“dangerous voltage”
inside the product.
The Exclamation
point within the
triangle is a warning
sign alerting you of
important
intstructions a
ccompanying the
product
CAUTION:TO REDUCE THE RISK OF
ELECTIC SHOCK, DO NOT REMOVE
COVER(ON BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

2
10.VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.This
product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instruction have been adhered to.
11. POWER SOURCES - This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to you home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to
operating instruction.
12. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating current line
plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way.This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet.Do not defeat the safety purpose
of the polarizes plug.
ALTERNATE WARNINGS - This product is equipped with a three-wire grounding-type plug, a plug having a third
(grounding) pin.This plug will only fit into a grounding-type power outlet.This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet, Do not defeat
the safety purpose of the grounding-type plug.
13. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and point where they exit from the product.
14. PROTECTIVE ATTACHMENT PLUG - The product is equipped with an attachment plug having overload
protection.This is a safety feature. See Instruction Manual for replacement or resetting of protective device.
If replacement of the plug is required, be sure the service technician has used a replacement plug specified
by the manufacturer that has the same overload protection as the original plug.
15. OUTDOOR ANTENNA GROUNDING- If an outside antenna is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the mast and supporting structure, grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
See figure:
ANTENNA
LEADIN
WIRE
ANTENNA
DISCHARGEUNIT
IN E C S E C T I O N 8 1 0 -2 1 0
GROUNDINGCONDUCTORS
IN E C S E C T I O N 8 1 0 -2 1 1
GROUNDCLAMPS
POW ERSERVICEGROUNDING
NEC NATIONAL ELECTRICAL CODE
ELECTRODESYSTEM
IN E C A R T250.P A R TH I
GROUND
CLAM P
ELECTRIC
SERVICE
EQ UIPM ENT

3
16. LIGHTNING - For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system.This will prevent damage to the product due to lightning and power-line surges.
17. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
18. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
19. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
20. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the product to its normal
operation.
e) If the product has been dropped or damaged in any way, and.
f ) When the product exhibits a distinct change in performance - this indicates a need for service.
22. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. SAFETY CHECK - Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
24.WALL OR CEILING MOUNTING - The product should be mounted to a wall or ceiling only as recommended by
the manufacturer.
25. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
TIPS ON BATTERY USE
When not in use for an extended period of time for while batteries are not being used, be sure to remove them
to avoid possible damage caused by battery corrosion and leakage
Weak or distorted sound usually indicated your batteries are low.Remove and discard appropriately and replace
with new batteries
Do not mix new and old batteries or non-chargeable and rechargeable batteries.

4
Caution of Battery
The batteries (battery pack or batteries installed) should not be exposed to excessive head such as sunshine, fire,
or alike.
Do not attempt to recharge short circuit, disassemble, heat or through the batteries into a fire
Inserting batteries with wrong or mixed polarities will result in damage to the batteries and/or may result in a malfu
nction of the unit
Do not mix old and new batteries
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Dispose of properly in accordance with local law.
CAUTION
THIS PLAYER IS A CLASS 1 LASER PRODUCT, USE OF CONTROLS OR ADJUSTMENTS OR PERFORMACE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL RO THE EYES, DO NOT ATTEMPT TO
DISASEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DANGER OF EXPOSION IF BATTERY IS INCORRECTLY REPLACED,
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
Canada Notice
This Class B digital apparatus complies with Canadian ICES-003.
WARNING: Changes or modifications to this unit not expressively approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Power
Plug the attached AC cord into a standard AC power outlet to power the DVD player.
Remote
Requires 2 AAA batteries (not included).
Do not mix old and new batteries
Do not mix alkaline, standard (carbon-zinc), or
Rechargeable (ni-cad, ni-mh, etc.) batteries

5
Remote Control
Power Open/Close
Mute
Audio
Number Keypad
Menu
Arrows/Enter
Title
Volume
Stop
DVD/USB/CARD
Video
OSD
N/P
Search
Goto
Prog
Setup
Subtitle
Skip
VIDEO
Play/Pause
Angle
Zoom
Wide
Repeat
Slow
A-B
A-B
Step

6
Power – Power the unit on and off
Number Keypad – For Inputting Number Digits
Menu – To bring up the DVD Player Menu
Arrows/Enter – Arrows are used for moving around the Menus. Enter is used for Selecting
Title – To Show the DVD Title
Volume – To adjust the DVD Player Volume
Stop – To Stop the DVD
DVD/USB – To select between DVD and USB Input
OSD – On Screen Display
L/R - Switches between the Left and Right audio channels.
N/P – To Select between NTC and PAL
Search – To search forward and backward
Open/Close – To open and close the DVD drawer.
Mute – To mute the DVD Player
Audio - To change the audio setting.
Goto -To go to a particular title, chapter or time
point.
Prog - To play contents of disc in the order you want by programming the track to be played
Angle – To switch between Multiple Camera Angles
Setup - To access or exit the SETUP menu.
Subtitle – To switch subtitles
Skip – To skip forward to back
Play/Pause – To play or Pause
Zoom – To enlarge the Picture
Wide – Change to wide view
Repeat – To toggle between different repeat modes.
Slow – To view slowly
Step - Plays video frame by frame.
A-B - Press to create a repeating loop on a specified section of a loaded DVD.

7
Front of DVD Player
FRONT PANEL AND REAR PANEL ILLUSTRATION
Back of DVD Player
STANDBY
ND210H
1 2 3 4 5 6 7 8 9
10 11
1.STANDBY BUTTON
2.DVD DOOR
3.OPEN/CLOSE BUTTON
4.PLAY/PAUSE BUTTON
5.STOP BUTTON
6.PERV BUTTON
7.NEXT BUTTON
8.USB JACK
9.CARD JACK
10.DISPLAY WINDOW
11.REMOTE RECEIVER WINDOW
1 2 3 4 5 6 7
98
1. 5.1 CHANNEL AUDIO OUTPUT JACK
HDMI AV OUTPUT JACK2.
3.
6. S-VIDEO OUTPUT J ACK
7. SCART OUTPUT J ACK
8. AUDIO LEFT OUTPUT J ACK
9. Y,PB/CB,PR/CR COMPONENT
OUTPUT JACK
4. COAXIAL DIGITAL AUDIO OUTPUT
JACK
5. VIDEO OUTPUT JACK
AUDIO RIGHT OUTPUT
AC INPUT
~

8
Power
Plug the attached AC cord into a standard AC power outlet to power the DVD player.
Connecting video and Audio
Note: Before making or changing any connections, make sure that all the devices are disconnected from the
power outlet.
Note: Both video and audio connections must be made from the DVD Player to your television.
RCA Stereo Audio Output
1. Use the RCA Stereo Audio Output to send audio from the DVD player to a television.
2.Required an RCA audio cable (included).
3.Use the RCA audio cable to connect the RCA Stereo Audio Output to an RCA stereo audio input on a television.
4.Adjust the connected televisions input setting to match the input used in the previous step.
Coaxial Digital Audio Output
1.Use the Coaxial Digital Audio Output to send high quality audio from the DVD player to an audio system.
2.Requires an RCA audio cable (included).
3.Use the RCA audio cable to connect the Coaxial Digital Audio Output to a coaxial digital input on an audio
system.
4.Adjust the connected audio system’s input setting to match the input used in the previous step.
5.In the Digital Out portion of the setup menu, adjust to PCM, RAW or off.
Composite Video Output
1.Use the Composite Video Output to send video from the DVD player to a television.
2.Requires an RCA video cable (included).
3.Use the RCA video cable to connect the Composite Video Output to a composite video input on a television.
4.Adjust the connected televisions input setting to match the input used in the previous step.
HDMI Output (Best)
Requires a HDMI cable (not Included)
1.Use a HDMI cable to connect the HDMI Output to a HDMI input on a television.
2.Adjust the connected televisions input setting to match the input used in the previous step.
3.Press the HDMI button on the remote to adjust the display resolution between 480p, 720p, 1080i and 1080p.
DVD,CD
Loading a Disc
1.Press the Open/Close button to open the Disc Drawer.
2.Load a disc into the DVD player, label side facing up.
3.Press the Open/Close button to close the Disc Drawer.
4.After a disc is loaded, it will begin playing automatically.
Playing a Loaded Disc
1.Follow the instructions for Loading a Disc.
2.If the disc does not begin playing automatically, press Play/Pause button.
Playing a JPEG Cd
Load a JPEG photo disc into the player by following the instructions for Loading a Disc. A slide show of JPEG
photos from the CD will begin playing automatically.
Press the Stop button to access a file view of the loaded JPEG disc.
Use the Arrows/enter buttons on the remote to select and view the photos.
USB Port
1.Connect a USB Thumb Drive to the USB Port.
2.Formats Supported are .AVI, MP4 Files and .Jpeg Files.
3.Press and Hold the DVD/USB Button to enter the DVD/USB mode
4.Use the Arrows/enter buttons on the remote to select and view the photos.

9
This producƟncorporates copyright protecƟŽn technology thaƟs protected by method claims of certain US
patents and other intellectual property rights owned by Macrovis on CorpŽƌĂƟŽn and other rights owners. Use of
this copyright proƚĞĐƟon technology must be authorized by Macrovision CorpoƌĂƟon, and is intended for home
and other limited viewing use only unless otherwise authorized by Macrovision corpoƌĂƟon.Reverse engineering
or disassembly is prohibited.
Troubleshooting
Before RequĞƐƟŶŐ Service
Check the following guide for possible cause of a problem before cŽŶƚĂĐƟng service.
noitcerroCmotpmyS
ylerucesteltuollawehtotnidrocrewopehtgulPrewopoN
No picture xSelecƩhe appropriate video input mede on the TV so the
picture from the DVD player appears on the screen.
xConnecƩba video cable into the jacks securely.
xTurn on the TV
No Sound xCheck audio connĞĐƟons.
xIf you are using a HiFi ĂŵƉůŝĮĞƌ, try another sound source.
The playback picture is poor xClean the disc.
xConnecƩhe TV/DVD player colour system.
The DVD player does not start playback xInsert a disc, if no disc inside the player
xInsert a playable disc. (Check the disc type, colour system
and Regional code.)
xPlace the disc with the playback side down.
xClean the disc.
xCancel the RĂƟŶgfunĐƟŽn or change the ƌĂƟŶg level.
Severe hum or noise is heard xWipe them with a clot slightly moistened with alcohol.
xClean the disc.
xConnecƩhe speakers and components securely
xMove your TV away from the audio components.
The remot Control does not work
properly
xPoinƩhe remote control aƩhe remote sensor oŌhe DVD
receiver.
xOperate the remote control within about 5m
xRemove obstacle.
xReplace the baƩeries with new ones.
Completely distorted picture or no colour xIŌhe picture is distorted completely or iŌhe picture rolls
ǀĞƌƟĐĂůůy make sure the NTSC/PAL sĞƫŶgaƩhe DVD player
matches the colour system of your television
The icon appears on screen xThe DVD’s sŽŌware restricts it.
xThe DVD’s sŽŌǁĂƌe doesn’t supporƩhe feature (eg. Angles).
xThe feature is not available aƩhe moment.

10
Technical Spe ons
CSTN/OTUA/LAPmetsyslangiS
ZH02esnopseRycneuqerF -20KHZ ( at 1KHz 0 dB)
Signal-toNoisy o (Audio) ш90 dB ( at 1KHz 0dB)
Audio D n + Noise ш-60dB (at 1KHz0dB)
0.2)oiduagolanA(tuptuOoiduA +0-1.0 Vrms
pV2.0±0.1:etisopmoCtuptuOoediV -p
Load impedance: 75 ?, imbalance, ne e polarity
011ylppusrewoP -240V~50/60Hz
GEPM/GEPJ/DCVS/DCotohP/3PM/DC/DCV/DVDcsiDdetroppuS -4
The symbol opposite indicates that the electric and electronic components are
the subject of a selective collection, it represents a dustbin on wheels barred of a
cross. The electric and electronic products can contain substances having
negative effects on the environment and health. Worn, they should not be thrown
with domestic waste but to be imperatively recovered in the selective collections:
dump, associations of social economy and interdependent.
The selection of waste decreases the potential effects on the environment and
human health due to the substances dangerous which can compose certain
components electric and electronic.
Take an active part: to remove you not from the apparatuses with domestic waste!