Noblewell NWOC6 User manual

Model: NWOC6
English ---------------------------- 01-06
Deutsch ---------------------------- 07-12
Français ---------------------------- 13-18
Español ---------------------------- 19-24
Italiano ---------------------------- 25-30
(A)
Office Chair
Instruction Manual
Thank you for choosing this NOBLEWELL product! At NOBLEWELL we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact us at
Technical Support:
(US/CA)1-800-556-2032 Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-3873 Mon-Fri 2pm - 10pm(UTC)
Other Info: [email protected]
Manufacturer: BESTQI INNOVATION(HONGKONG)TECHNOLOGY CO., LIMITED
Address: RM21 UNIT A 11/F TIN WUI IND BLDG NO 3 HING WONG ST TUEN
MUN NT HONGKONG
Recyclable

• Check package contents against supplied parts and hardware list to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
require replacement parts, please contact NOBLEWELL customer service at
[email protected].
• Carefully read all instructions before attempting installation. If you do not understand
the instructions or have any concerns or questions, please contact customer service at
[email protected].
• One chair is confined to one person.
• Please put the chair on a flat place when using.
• Please do not let the children under 5 years old to sit the chair alone.
• Please do not sit on the armrest, which would cause damage to the chair and lead to
damage.
• Don’t stand on the chair or use it as a ladder or stair.
• Do not put heavy objects on the chair, or use it as trolley.
• Keep your hands away from the seat base mechanism besides the knob to avoid
unwanted injuries.
• Do not use items with sharp or hook to scratch the chair.
• Keep the chair away from the fire.
• Please do not sit on the front of the seat to avoid dumping. Please sit at the end of the
chair completely. When standing up from the sitting position, please clench the armrests
of the chair.
• Please do not lift your legs up while tilting the backrest backwards to avoid dumping.
IMPORTANT SAFETY INFORMATION
Supplied Parts and Hardware List
Leg
x1
Leg
Connector
Decorative
Cover
x1
Caster
x5
Gas Lift Cylinder
x1
01 04 0502 x1
03
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

Backrest
x1
Seat
x1
R
L
Installation Steps
Press the caster [04] hard
until it clicks into the hole on
the leg.
12
Armrest
x1
Headrest
x1
M6X15mm
Ax5
Bolt
x1
M6X30mm
M8X20mm
Seat Plate
x1
13/64 in (5mm)
Allen Key
M6X16mm
Dx2
Bx6
Cx7
01
A
E
06 07 08 09
10
Insert the legs [01] into the
leg connector [02].
E
02
04
Bolt
Bolt
Bolt
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

R
L
4
3
Place the armrests [07] to the seat at your desired position, then secure
the armrests in place by tightening the bolts [B] with the Allen key [E].
Front
Attach the decorative cover [03] to the leg connector [02], then
press the gas lift cylinder [05] into the leg connector [02].
05
03
01
02
06
07
07
B
E
You may need assistance with
this step. The 1st person holds
the seat while the 2nd person
assembles the armrests.
Front
E
L
B
NOTE: Ensure the leveler control is
pointing to right side in this step.
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

6
5 Secure the seat plate [08] on the seat [06] by tightening the bolts
[C] with the Allen key [E].
Insert the backrest [09] at your desired position, then secure the
backrest [09] in place by tightening the bolts [C] with the Allen key
[E].
Back
E
C
08
06
08
06
09
You may need assistance with
this step. The 1st person holds
the seat while the 2nd person
assembles the seat plate.
HEAVY! You may need assistance
with this step. The 1st person holds
the seat while the 2nd person
assembles the backrest.
C
Front
Front
L
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

7Insert the headrest [10] into the center of the backrest frame, then
secure it into place by tightening the bolts [D].
8 Align the hole on seat plate with gas lift cylinder, then press the seat
down to secure it to gas lift cylinder.
09
10
E
D
05
09
10
HEAVY! You may need assistance
with this step. The 1st person holds
the seat while the 2nd person
assembles the headrest.
HEAVY! You may need
assistance with this step.
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

A. HEADREST
Tilt Adjustment:
Hold the headrest to adjust it to your
desired angle.
Height Adjustment:
Hold and lift or lower the headrest.
B. ARMREST
Height Adjustment:
Lift the armrest height adjustment buttons
to raise or lower the armrests.
Swivel Adjustment:
Hold the front of the armrests and swivel
them in an inward or outward position
(diagonal).
Forward/Back Adjustment:
Push the armrests forward or backward to
the desired position.
C. SEAT&BACKREST
Seat Height Adjustment:
Adjust:
Pull up the lever control and hold it while raising or lowering the seat to change
the seat height. When the lever is released, the seat height is locked.
Tip:
While adjusting rest your body weight on the seat when lowering the seat height.
Lift your body weight off the seat when raising the seat height.
Backrest Tilt Angle Adjustment :
Pull the lever control completely outward and lean against the backrest until the
desired angle is achieved, and then return the lever control to its original position
to lock the back at an ideal angle.
Backrest Rocking Function:
Pull the lever control completely outward to activate the rocking function. The
rocking function means that the chair will rock back and forth with the user
rather than being locked into a fixed position.
Adjustment
Backrest Quick or Slight Tilt Tension
Adjustment
Adjustment:
Turn the knob in the [+] direction to increase
the rocking tension. Turn the knob in the [-]
direction to decrease the rocking tension.
Tip:
This adjustment is to fine tune the tension of
the chair when used in rocking function.
However the tension needs to be adjusted to
suit the user 's weight. Typically a heavy
weight user would need more tension and a
light weight user would need less tension.
+-
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30

Thank you again for
choosing this NOBLEWELL product!
All of us at NOBLEWELL do appreciate your product purchase. We hope
that you are as happy with your product as we are designing and manu-
facturing it for you. We strive to provide you with the best quality products
and services in the industry. Should you have any issues, please don't
hesitate to contact us at
Technical Support:
(US/CA)1-800-556-2032 Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-3873 Mon-Fri 2pm - 10pm(UTC)
Other Info: [email protected]
860-00019-02 Rev00