Diphano Sunset User manual

Sunset
INSTRUCTION MANUAL

2
CONTENT
how to connect the modules
2x connector
Start by unpacking everything carefully. Make sure to cover the floor to prevent any
damage or scratching (you can use the cardboard box for this).
Diphano cannot be held responsible if the assembly instructions are not followed properly.

3
LOOSEN SCREWS
ATTACH CONNECTORS
The plastic screws are standard delivered attached on the
module. Unscrew them on the first module to get started.
Attach one side of the connector onto the hole on the side of the furniture. Repeat
the same action for the second connector. Do not fix the screws too tight, so you
can still move the connector back and forth.
1
2

4
PLACE SECOND MODULE
LOOSEN SCREWS
Place the second module next to the first module.
Loosen the 2 screws on the second module a little so that you have enough
space to clip the connector.
3
4

5
ATTACH TO SECOND MODULE
TURN MODULES
Attach the other side of both connectors onto the second module.
Then tighten all screws.
Now your modules are connected. Tilt the furniture back to its normal position with
minimum 4 persons.
5
6

6
how to adjust the feet
Check with a spirit level if the modules are placed level. If not, (un)screw the
adjustable feet until your concept is completely level. This ensures each module
can be leveled so it fits perfectly to the next module.

7
maintenance & care
FABRICS
Simply brush away loose dirt. Spray on a cleaning solution of water and mild
soap. Use a soft bristle brush to clean and allow cleaning solution to soak into the
fabric. Rinse thoroughly until all soap residue is removed and allow to air-dry.
30°

PIDE220203
www.diphano.com
Textielstraat 4 - 8790 Waregem - Belgium
Tel. [phone] - [e-mail]