Nova SMA-1-0203-NK series User manual

Surface Mount Arm
Assembly Instructions
Model #
SMA-1-0203-NK
Step 1
Cut opening for grommet, (Figure 1). Note the grommet cut-out
distance from back edge of work surface. Insert grommet sleeve
(G) into cut-out.
-22, -24, -27, -28, -30, -33 and -34
5/16" R.
4 places
(8 mm)
18”
Min. Surface Depth
3-¼
”
(82.6 mm)
1-
1/16
” (27mm) for 18” or 24” D Surface
3-
13/16
” (96.7mm) for 30” D Surface
1
7/8
”
(47.5 mm)
FRONT EDGE of WORK SURFACE
KB drawer size Dimension A
22"
24"
27"
28"
30"
33"
34"
2
1
/
2
"
(64
mm
)
2
1
/
2
"
(64
mm
)
4
"
(102
mm
)
1-1/4"
(Offset 32mm)
Typical
3/16" Dia.
5/8" Deep
6 Places
321/8" (816 mm)
2219/32" (574 mm)
255/16" (643 mm)
261/8" (664 mm)
281/16" (713 mm)
311/4" (794 mm)
1813/16" (478 mm)
B
A
Figure 1
Grommet
Cut-Out
Keyboard
Drawer
Drill
Pattern
P.O. Box 725 • 425 W. Industrial Avenue • Effingham, IL 62401 • Phone [phone] • Fax [phone] • [email protected] • www.novadesk.com
IIR030_SMA-1-0203 Instructions ©Nova Solutions, Inc. 2011 Patents pending.
Step 3
With the tubing of the Surface Mount Arm through grommet
cut-out, mount the Arm bracket underneath the desk top using
six (B) sheet metal screws, Figure 3. (NOTE: You may first have
to depress the Silver Safety Pin on tubing to separate the Arm
into two pieces).
Figure 3
Tubing through
grommet cut-out
Silver safety pin
Arm mounting bracket
Position arm so that wing nut faces
user side of work station
B
Kit Includes:
Surface Mount Arm, Grommet and
Nova Keyboard Drawer
Step 2
Using the template provided, drill holes for the Surface Mount
Arm bracket on underneath side of work surface. Holes should
be centered over grommet cut-out, (Figure 2).
1.26"
(32 mm)
Underneath Work
Surface Drill Holes:
3/16" Dia.
5/8" deep
6 places
Grommet
Cut-out
1"
(25.3 mm)
1"
(25.3 mm)
1-1/4"
(32 mm)
2-1/16"
(52.4 mm)
6"
Figure 2
QTY REF # ITEM # DESCRIPTION
1 A SMA-1-0203-NK FPD Surface Mount
with Nova Keyboard
10 B 1412APPBO #14x3/4
Sheet metal screw
1 C Flat Arm Plate 75 mm VESA Plate
1 D Flat Arm Plate 100 mm VESA Plate
4 E 50900219 4MMX .7x10
Machine screw
4 F 10628-03819 4MMX .7x8 FH PH
MS Black Screw
1 G 50-8-1080 Grommet
1 H 20060126 Keyboard Hanger
with Glide - Left
1 J 20060127 Keyboard Hanger with
Glide - Right
2 K 50900032 #14x1-1/2” Screw
1 L Varies by size Nova Keyboard Drawer
Packing List
A
B

Step 4
Remove flat panel display base. Attach flat panel
display to VESA plate (C or D) with screws (E, Figure 4).
Step 5
Slide extension tube that is attached to VESA plate into
the extension tube protruding through grommet hole,
(Figure 5). After desired monitor height is reached,
tighten wing nut to ensure extension tubes do not slide.
When installing some Apple® flat panel displays, a
VESA Adapter (Model #50-8-4100) may be necessary.
Contact Customer Support for more information.
75 mm VESA plate
Attaching VESA plate to Flat Panel Display
E
100 mm
(3-
15
/
16
")
4-
7
/
16
"
100 mm
(3-
15
/
16
")
E
75 mm
(2-15/16")
3-3/4"
75 mm
(2-15/16")
100 mm VESA plate
CD
Wing Nut
Figure 4
Figure 5
Step 6
Adjust flat panel angle to desired location by firmly
grasping top and bottom of monitor and tilting (Figure 6).
P.O. Box 725 • 425 W. Industrial Avenue • Effingham, IL 62401 • Phone [phone] • Fax [phone] • Email: [email protected] • www.novadesk.com
IIR030_SMA-1-0203 Instructions ©Nova Solutions, Inc. 2011 Patents pending.
Step 7
Attach keyboard hangers (H, J, Figure 7), to underside
of work surface with screws (B, K).
NOTE: The longer screws (K) pass through the tubular
section of the keyboard hanger. This allows the
assembly to be leveled by loosening or tightening the
screws.
B
K
H
J
K
B
Figure 7
Outward
locking tab
Step 8
Slide keyboard drawer into glides. Pull outward locking
tab forward to lock keyboard drawer into place (Figure 8).
Figure 6
Figure 8