Nova I-Mac Pro User manual

User’s Manual

1
Content
I. Reference................................................................................... 2
1.1 General Features........................................................... 2
1.2 Accessories ................................................................... 2
II. Product Overview ...................................................................... 3
2.1 Front Panel.................................................................... 3
2.2 Rear Panel..................................................................... 3
2.3 Remote Control Unit (RCU)............................................ 4
III. STB Menu ................................................................................ 6
4.2 Factory Default .............................................................. 7
4.3 USALS Setup ................................................................ 7
V. Edit Channel ............................................................................. 8
5.1 TV Channels.................................................................. 8
5.2 TV Favorites .................................................................. 9
5.3 Sort Channels.............................................................. 10
5.4 User channel list .......................................................... 10
VI. Settings.................................................................................. 11
6.1 System Settings........................................................... 11
6.2 OSD Setup .................................................................. 12
6.3 Parental control............................................................ 12
6.4 Calendar...................................................................... 12
6.5 Times .......................................................................... 13
6.6 Color Settings .............................................................. 13
6.7 IP Setting..................................................................... 13
6.8 3G ............................................................................... 14
6.9 About STB ................................................................... 14
VII. Network Apps........................................................................ 14
VIII. USB ..................................................................................... 14
8.1 Basic Operations ......................................................... 15
8.2 Setting ......................................................................... 16
8.3 Play Fies...................................................................... 17
Ⅸ.WiFi ........................................................................................ 18

2
I. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264/ H.265)
SCPC & MCPC receivable from Ku and C band satellites
DiSEqC1.0/1.1/1.2/1.3 (USALS)
Blind search supported
PAL/NTSC Conversion
True full Color (32 bits) on screen display (OSD)
8 favorite group and parental lock supported
Multi-language menu supported
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD
USB 2.0 Interface
Support many network functions
Support 4K Ultra High Definition Program
1.2 Accessories
. Users manual
. Remote Control Unit
. Batteries
. HDMI Cable

3
II. Product Overview
2.1 Front Panel
1.POWER:Switch between operation and standby modes.
2. POWER LED: Power Indicator.
3. SIGNAL LED: Signal Indicator.
4. DISPLAY: It displays channel number. In standby mode it displays local
time.
2.2 Rear Panel
1. LNB IN: Connect the satellite antenna cable.
2. SPDIF: Digital Audio output (SPDIF).
3. DV-OUT: Connect to the TV using an HDMI cable.
4. USB2.0: Connect USB disk.
5. AV: Connect to the TV using an RCA cable.
6. LAN: Connect to the Ethernet using a Network cable.
7. DC-12V: Connect to the power.

4
2.3 Remote Control Unit (RCU)
You can control this receiver by this remote controller with full function.
1. POWER: : Switch between operation and
standby modes.
2. MUTE : Mute audio.
3. Mode: Change the display format.
4. Time: Setup the event timer.
5. TV/R: Switch between TV and RADIO.
6. Display: Set the display mode.
7. NUMERIC KEY (0~9): Enter a TV/radio
channel number or menu option number.
8. F1/F2/F3: Accessorial function.
9. Recall: Show the previous viewed channels list.
Or switch to the previous viewed channel.
10. TXT: Display the teletext.
11. Motor: Enter the Motor Mode.
12. Zoom: Picture zooming function.
13. Sub:Display the subtitle language list.
14. INFO: Display the programme information.
15. Wi-Fi: Enter the Wifi wireless setting.
16. APP: Enter the Network APP.
17. AUDIO: Display the audio list.
18. EXIT: Exit current menu step by step.
19. MENU: Activate main menu or exit to live
channel.
20. /:Change volume.

5
21. ▲/▼:Page up and down.
22. OK: Confirm the selected operation or
display the channel list while watching a
programme.
23. FIND: Quickly find channels.
24. SAT: Show the scanned satellite list.
25. PG+/PG-: Page up/down on menu or
channel list.
26. FAV: Display favorite channel list you set
before.
27. IP: Enter IP setting menu.
28. VOL+/VOL-: Change volume.
29. SW: Enter the USB Update menu.
30. PAUSE: Pause the program.
31. EPG: Display the programme guide.
32. HD: Enter the HD Channels.
33. I: Previous. I: Next.
34. :Fast rewind. : Fast forward.
35. ●:Record.
36. ■: stop.
37. II：Pause/Go to timeshift function.
38. :Play.
39. Help: Accessorial function.
40. USB: Enter USB menu.
41. SLEEP: Set sleep time.
42. ►I I: Pause/Time shift.

6
III. STB Menu
You should installation the receiver when powering on your product for the first
time after purchase.
Note: The default password is 0000.
Main menu
Press the MENU button to enter the main menu.

7
4.2 Factory Default
Menu->Installation-> Factory Default
You can restore the product to the factory default
1. All: All data and settings will be deleted.
2. Channels List only: All channels data will be deleted.
3. Radio Channel only: All radio channels data will be deleted.
4. Scramble Channels only: All scramble channels data will be deleted.
5. TP Channels only: The TP of channel you selected will be deleted.
6. SAT Channels only: The Satellite of channel you selected will be deleted.
4.3 USALS Setup
If you set the Motor Mode to USALS, you need set the longitude and the
latitude in USALS Setup.
Setup by Country: Press the RED button, you can choose the country, press
OK button to select.

8
V. Edit Channel
Tip: You can press the Sat button to choose different satellite according to the
help information, press OK to confirm, then all the channels of this sat will be
display.
5.1 TV Channels
Menu-> Edit Channel -> TV Channels or Radio Channels
Edit Channels enables you to move, delete, lock/unlock , rename the
channels in the channel list.
1. Move Channels: Press the RED button and press the OK button to select
the channel.Press the /button or press the NUMERIC(0-9) buttons to the
destination in the channel list and press the OK button.
Move Group Channels：Press the BLUE button two times to sign the
channel,and press the /to highlight the second channel you want to group
move. Press the BLUE button to sign the channel. Press the /button to the
destination in the channel list and press the OK button.
2. Delete Channels: Press the GREEN button and press the EXIT button, here,
select Yes.
3. Lock and Unlock Channels:Press the YELLOW button input the password
to lock the channel.
Note: If the highlighted channel is locked, press the YELLOW button is
switched into Unlock.
4. Rename Channels: Press the BLUE button to enter a channel name directly

9
using the keyboard displayed on the screen. Press the BLUE button to
complete.
Tip: Radio Channels operation similar to the TV Channels.
5.2 TV Favorites
Menu-> Edit Channel ->TV Favorites or Radio Favorites
Press the colorful button to add the Favorite channel you want to set up,then
press the /button can change the types.
1. Highlight the channels you want to add or remove from the favorite channel
list.
2. Press the colors button to mark the channel as selected favorite group.
3. Press F1 key to rename favorite group.
4. Press the EXIT button to exit the menu and save it.
Tip: Radio Channels operation similar to the TV Channels.

10
5.3 Sort Channels
Menu-> Edit Channel -> Sort Channels
You can sort the channels list.
Highlight the option you want and press the OK button to sort the channel list.
You can sort by Alphabet, Transponder, FTAToCAS,Default, Favor,
FTAToCAS+Alphabet, Provider and Service ID.
5.4 User channel list
Menu-> Edit Channel-> User Channel List
User Channel List allows you to save or load all the data and settings.

11
VI. Settings
In this menu you can make some system settings
6.1 System Settings
Menu-> Settings-> System Settings
Tip: You can set all the settings here by pressing /button.
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4. Subtitle Language: Set the subtitle language.
5. Subtitle Control: If you set ON ,the channel can auto display the subtitle
language.
6. EPG Language: Set the preferred EPG language.
7. TXT Language: Set the TXT language.
8. Digital Audio: Set the output mode of the digital audio.
9. Auto Chanel Selection：If you set ON, in the channel list will play
automatically.
10. Auto Exit CH List: If you set ON, the channel list will disappear when you
press OK on a Highlighted channel. If you set OFF, the channel list will
disappear when you press OK on a playing channel.
11. Multi Pic Loop: Accessorial function.
12.Recall List:You can turn Recall List on or off.
13. PLSN Super Scan: Accessorial function.
14. Front Panel Light: Accessorial function.

12
15. DLNA background service: Accessorial function.
16. Weather bar: Accessorial function.
6.2 OSD Setup
Menu-> Settings-> OSD Setup
1. Menu Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of teletext.
3. Display Mode: Set the HDMI output mode.
4. HDR:Accessorial function.
5. TV Type: Set the TV Type on PAL/NTSC/Auto state.
6. Screen Mode:Set the display format according to the screen ratio.
7. OSD Timeout: Set the display time of the programme information.
6.3 Parental control
Menu-> Settings-> Parental Control
Parental Control allows you to set limits for each programme or change
your previous password.
6.4 Calendar
Menu-> Settings-> Calendar
You can use /and▲/▼button to adjust the date.
Press the GREEN button，you can add a memo.

13
6.5 Times
Menu-> Settings->Times
You can setup the system time.
Note: The time you set will be shown on the front panel when you set receiver
to standby mode.
6.5.1 Event Timer.
Press the RED button to setup a timer, press the YELLOW button will delete
this timer and press the GREEN button can go to edit this timer.
6.5.2 Sleep Timer
1. Press the /button to select the option or input the number at “-- M”
option.
2. Press the OK button to save.
6.5.3 Standby Time
Standby Time can set the time display on front panel when standby.
6.6 Color Settings
Menu-> Settings-> Color Settings
Color Settingscan set the Brightness ,Contrast ,Saturation ,Hue and
Sharpness.
6.7 IP Setting
Menu-> Settings-> IP Settings
If the Ethernet cable is connected fine, it will display “Connected”.
RED: Get IP address automatically.
GREEN: Test the network if connect correctly.

14
6.8 3G
Menu-> Settings-> 3G
1. Plug in the 3G dongle to the USB port.
2. Enter Menu-> Expansion-> 3G.
3. Selete the access point or set the Auto Detect on, then you can connect the
network.
RED: Enable or disable the connecting.
6.9 About STB
Menu-> Settings->About STB
About STB can get the information about the STB, such as product name,
software & hardware version, and serial number and so on. When you need
service from the dealer you need to submit this information in order go get the
correct and fast after sales service.
VII. Network Apps
Menu->Expansion-> Network Apps
You can visit some network app, such as Net Link, Radio, FTP Download,
Weather, RSS and Prayer Times.
VIII. USB
Menu->USB
Go to Menu-> Expansion-> USB or press the USB button directly
USB can play many kinds of media files, you can record program
and playback it and you can do various operations when using USB
HDD or USB disk.
Note: It supports FAT, FAT32 and NTFS format USB disk or USB
HDD.If hard-disk is to be used with the receiver, please make sure it is inse-
rted before booting up.

15
8.1 Basic Operations
1. Tool
Rename Files
1) Highlight the file or folder.
2) Press the RED button and Highlight the Rename.
3) Press the OK button can rename the file or folder.
Delete Files
1) Highlight the file or folder.
2) Press the RED button and Highlight the Delete.
3) Press the OK button can delete the file or folder.
Move Files
1) Highlight the file or folder.
2) Press the RED button and Highlight the Move To.
3) Select a destination folder.
4) Press the OK button to move the highlight folder or file to destination folder.
Copy Files
1) Highlight the file or folder.
2) Press the RED button and Highlight the Copy To.
3) Select another disk partition.
4) Press the OK button to copy the highlight folder or file to disk partition which
you selected.
Create New Folder
1) Press the RED button and Highlight the Create New Folder.
2) Press the OK button to create a new folder in current folder.
Sort
1) Press the RED button and Highlight the Sort.
2) Select the sort type. (First Name/Date/Size)
3) Press the OK button to sort by sort type which you selected.
Format Disk
1) Highlight a disk partition or enter a disk partition.
2) Press the RED button and Highlight the Format Disk.
3) Press the OK button and then select a format mode (Fat and NTFS). Then
press OK button to confirm format. After formatting, all the files in current disk
partition will be lost.
2. Upload

16
Upload Data ,channel or all to USB
1) Enter the USB disk.
2) Press the YELLOW button and highlight the Upload Data ,channel or all
channel to USB.
3) Press the OK button can upload the data and setting to usb disk.
Upload to FTP
1) Highlight the file or folder.
2) Press the YELLOW button and highlight the Upload to FTP.
3) Press the OK button can upload the highlight file or folder to FTP.
8.2 Setting
1. Play Mode
Loop Set the Loop state on Normal, Reverse, Random, Single or Off.
Slide Show Interval Set the Slide Show Interval from 2S-10S.
Photo View Mode Set the Photo View Mode state on Full Screen, 2x2
Thumbnail or 2x3 Thumbnail.
2.PVR Setting
Record Partition Select the Partition where save your record or other
result of your operation.
Record Mode Set the Record Mode Channel or Transponder.
Record Type Set the Record Type TS or PS.
Record Time (Minute) Set the Record Default Time off, 30, 60, 90, 120
minute or input number directly.
Auto Timeshift Set start the Timeshift if automaticly.
Timeshift Buffer Size(MB) Set the Timeshift Buffer Size Auto , off, 100,
200, 400, 800, 1600, 3200, 6400MB.
Timeshift Need Save Set the Timeshift if need to Save.
Play Start Pos When playing the PVR file, set the Play Start Pos
whether head of the file or last pos (Stop play by manual last time) of
the file.

17
8.3 Play Fies
1. Movie
It supports *.3GP, *.AVI, *.DAT, *.FLV, *.MKV, *.MOV, *.MP4, *.MPG,
*.M2TS, *.TS, *.VOB format movie files.
2. Music
It supports *.flac, *mp2, *.mp3, *.ogg, and *.wav format music files.
3. Picture
It supports *.bmp, *.jpg, and *.gif format photos.
Tip: You can press the Green button to go to Play ModeSet the Photo View
Mode state on Full Screen, 2x2 Thumbnail or 2x3 Thumbnail in the USB menu.
The picture followed is 2x2 Thumbnail mode.
4. PVR
You can playback the files you recorded. And the recorded files are saved in
folder named ALIDVRS2.
5. Play List
You can play the movie/photo/music/PVR files in the Play List.

18
Ⅸ.WiFi
Enter Menu->WiFi
Plug in the wireless USB dongle to the USB port.
1. Select the network name of your Wi-Fi access point from the list. And you
can press RED button to refresh the list.
2. Press the OK button, then input the right password. And you can press
YELLOW button to disable/enable the WI-FI.